The velocity check required both box corners to move in the same direction, but the corners of an approaching object diverge, so its velocity was rejected and zeroed and the camera aimed where the object had been. That check is removed, and the existing magnitude, delta, and variance checks still reject noise. The zoom size prediction fit area against epoch time with no intercept, which returned roughly the mean area instead of a forecast. It now scales the target box by the growth the corner velocities predict over the movement time.
Movement time prediction multiplied the fitted intercept by the saved zero-step calibration time instead of 1, so predictions didn't match the regression. In absolute zoom mode, a pan/tilt followed by a zoom recorded the zoom's timestamps against the pan/tilt distance, because _zoom_absolute resets the PTZ start and stop times. The pan/tilt times are now captured before the zoom runs.
Users can swap in their own go2rtc binary at /config/go2rtc or point ffmpeg.path at a custom build, and either can explain stream behavior that looks like a Frigate regression. The install section now reports a custom_go2rtc boolean and an ffmpeg enum (default, bundled, custom) for the configured global path, so no version strings or path text leave the install.
* write migrated config atomically
Config migration rewrote config.yml in place with open("w") after each step, so nginx's get_nginx_settings.py, which starts alongside frigate, could read an empty file, get None from yaml.load, and crash on config.get. Each step now writes to a temp file with the original mode and os.replace's it into place.
* keep config owner and handle file bind mounts in migration writes
os.replace failed with EBUSY when config.yml was a file bind mount, as in the documented --validate-config command, and the replaced file lost its original owner when Frigate ran as root. The write now copies in place on EBUSY and restores the original owner when permitted. Tests cover a failed dump leaving the original config and the bind-mount fallback.
* follow config symlinks in migration writes
* Request FP16 TensorRT engine for ONNX detector with device Tensorrt
get_ort_providers only enables trt_fp16_enable when requires_fp16 is
passed, and the ONNX detector never passed it, so device: Tensorrt
always built an FP32 engine. USE_FP16=False still disables FP16.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make TensorRT FP16 opt-in via USE_FP16 only
Drop the unused requires_fp16 parameter from get_ort_providers and decide
trt_fp16_enable from the USE_FP16 environment variable alone, defaulting
to false. Revert the ONNX detector change and document USE_FP16=true for
device: Tensorrt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the TensorRT docs line
The stock image ships only the TensorRT runtime, not the builder
libraries needed to create engines, so the instructions were misleading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* strip intel media driver on install
The manually built iHD_drv_video.so was installed with full debug info, making it 513 MB in the image instead of 41 MB stripped. Installing with install/strip removes about 240 MB from the compressed amd64 image.
* remove rjsf 6.11.0 dependabot hold
The hold covered the GenAI form refilling the saved model after a provider switch. That was a GenAIModelWidget bug that rjsf 6.11 exposed, and it was fixed with the 6.11.1 bump in #24901, so no rjsf version needs holding.
* strip intel media driver after install
install/strip skipped iHD_drv_video.so because media-driver installs it with install(PROGRAMS), not as a target. Strip it directly instead.
* bump dev docs version in header
* attest published images with github build provenance
Published images carried unsigned BuildKit provenance, so nothing tied an image digest to the commit it was built from. Each published image (the default multi-arch build and the six variants) now gets an actions/attest provenance attestation pushed to GHCR, verifiable with gh attestation verify. Release tags are skopeo copies with the same digest, so they're covered too. Storage records are off because they require an org-owned repo.
* Add on-demand Frigate+ API key validation
The Frigate+ settings page reported the API key as validated whenever it
matched the expected format, without ever checking it with the server.
- Clarify the status text to say the key matches the expected format
- Add PlusApi.validate_key(), which requests a token from Frigate+ and
reports the key as valid, invalid, unreachable, or not set; server
errors and timeouts are not reported as an invalid key
- Add an admin-only POST /plus/validate endpoint and regenerate the API spec
- Add a "Validate with Frigate+" button that shows the result inline
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E4iDiZE2b3tVFVYyZrfZde
* Validate Frigate+ key asynchronously and keep cached token on bad replies
- Use aiohttp for the validation request so the endpoint awaits it
instead of blocking a worker thread
- Only replace the cached token when the reply has a string accessToken
and numeric expires; otherwise report unreachable so an unexpected
response can't break later Frigate+ requests
- Test against a local aiohttp server, covering timeouts, connection
failures, non-JSON replies and unusable token shapes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E4iDiZE2b3tVFVYyZrfZde
* Honor proxy settings when validating the Frigate+ key
aiohttp ignores HTTP(S)_PROXY unless trust_env is set, so validation
reported Frigate+ as unreachable on installs that need a proxy while
other Frigate+ requests still worked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E4iDiZE2b3tVFVYyZrfZde
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* check go2rtc stream sources on the internal port
auth() returned admin for internal port requests before the go2rtc src check ran, so anyone who could reach port 5000 could send an unknown src to /api/ws, and go2rtc created a stream from it and started its producer, including ffmpeg sources with #raw= arguments. The internal port now rejects any src that isn't an existing stream, the same as the external port, and still skips the per-camera role checks.
* reject go2rtc stream names that can inject transcode parameters
live.transcode.source names a go2rtc stream that is spliced into an ffmpeg:{name}#video=h264 source, and stream names were never validated, so a stream named with #raw= parameters, whitespace, quotes or a ${VAR} reference added its own ffmpeg arguments. New stream names with these characters are rejected through the API, transcode.source fails validation when its stream name has them, and startup skips the generated transcode stream.
* only export allowlisted environment_vars
apply_config_env_vars wrote every unprefixed environment_vars key into os.environ and exported every FRIGATE_ key, so a config could set LD_PRELOAD or LIGHTER_ANE_EP to load a library into Frigate or its children, or set FRIGATE_RUN_AS_ROOT to turn off the ffmpeg.path writable-tree guard. Only the documented names are now exported, each with a value check, and a name the container already sets is never overwritten. FRIGATE_ keys still feed substitution, but only FRIGATE_JWT_SECRET is exported. Anything else logs a warning naming the key.
* don't trust live stream names as existing go2rtc streams
* don't run a config ffmpeg.path as root at boot
The frigate and go2rtc run scripts probed "$ffmpeg_path" -version as root before dropping privileges, and resolve_ffmpeg_path only refused runtime-user-writable paths when frigate itself was a root service. In the default mode uid 1000 could set ffmpeg.path to a /config directory, plant bin/ffmpeg there, and get root on the next restart, and under FRIGATE_ROOT_SERVICES=go2rtc a root go2rtc used that path as its ffmpeg bin. The probe now runs as the service user whenever the service drops privileges, and resolve_ffmpeg_path refuses writable paths for whichever service will run the binary, returning the resolved path so a symlink can't be retargeted after the check. go2rtc falls back to the bundled build's libavformat version if its user can't run the custom build.
* resolve the full ffmpeg path under granular root
* remove nginx-secure-token-module from the nginx build
Kaltura deleted the nginx-secure-token-module repo, so the tarball download in build_nginx.sh returned a 404 and any build without a cached nginx layer failed. This drops the module and its secure_token directives from the vod location.
* use sub_filter to pass vod playlist args to segment URLs
Home Assistant signs vod playlist URLs with authSig and needs it on every init, segment, and index URL in the playlist. sub_filter appends the request args to the three URL endings vod writes, giving byte-identical playlists to the old secure_token output.
Currently translated at 89.9% (695 of 773 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.4% (472 of 522 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (141 of 141 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1260 of 1396 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (74 of 74 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 89.1% (107 of 120 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (50 of 50 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.5% (240 of 265 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 89.9% (695 of 773 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 64.4% (181 of 281 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1260 of 1396 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1260 of 1396 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 89.9% (695 of 773 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.4% (472 of 522 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 64.4% (181 of 281 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1260 of 1396 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (50 of 50 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.5% (240 of 265 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (129 of 129 strings)
Update translation files
Updated by "Cleanup translation files" add-on in Weblate.
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 89.9% (695 of 773 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1265 of 1401 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (129 of 129 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (500 of 500 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 96.8% (62 of 64 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.2% (1265 of 1401 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (129 of 129 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 90.5% (240 of 265 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (500 of 500 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 98.5% (67 of 68 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (500 of 500 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (500 of 500 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (129 of 129 strings)
Translated using Weblate (Chinese (Traditional Han script))
Currently translated at 100.0% (500 of 500 strings)
Update translation files
Updated by "Cleanup translation files" add-on in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Co-authored-by: 蘭蘭露 <flandretw@users.noreply.hosted.weblate.org>
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/audio/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/common/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/components-camera/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/components-dialog/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/components-dialog/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/components-filter/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/config-cameras/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/config-global/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/objects/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-classificationmodel/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-events/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-motionsearch/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-settings/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-settings/zh_Hant/
Translate-URL: https://hosted.weblate.org/projects/frigate-nvr/views-system/zh_Hant/
Translation: Frigate NVR/Config - Cameras
Translation: Frigate NVR/Config - Global
Translation: Frigate NVR/audio
Translation: Frigate NVR/common
Translation: Frigate NVR/components-camera
Translation: Frigate NVR/components-dialog
Translation: Frigate NVR/components-filter
Translation: Frigate NVR/objects
Translation: Frigate NVR/views-classificationmodel
Translation: Frigate NVR/views-events
Translation: Frigate NVR/views-motionSearch
Translation: Frigate NVR/views-settings
Translation: Frigate NVR/views-system
Josh Hawkins