* bound recording snapshot lookups by segment length
Ordering the recording snapshot and Frigate+ lookups by stream_type ahead of start_time broke index order, so SQLite fetched and sorted every older recording for the camera on each request (about 100 ms on a 30 day camera, run on the event loop). A start_time lower bound of the frame time minus MAX_SEGMENT_DURATION keeps the lookup to a few rows.
* bound recording overlap queries by segment length
Clip, export, review and recording deletion, debug replay, motion search, and audio transcription found overlapping recordings with an OR clause that gave SQLite no start_time range, so every call read the camera's whole recording history (30 to 300 ms on a 30 day database). The classification and review description point lookups did the same whenever the timestamp had no recording. A shared recording_overlap helper now adds a start_time lower bound of MAX_SEGMENT_DURATION before the range, which drops no rows because segments are always shorter than that.
* probe webrtc before reporting it as not configured
The WebRTC gate read only the Frigate config, so an install with no go2rtc candidates showed WebRTC as not configured, even though go2rtc fills in default candidates at startup (including the internal one under the HA app) and WebRTC often worked. Unset candidates now run the connectivity probe first, and only a failed probe reports not configured. The not-configured reason shows as a neutral note that names the setting and says WebRTC is optional, rather than as a red error.
* validate trusted_proxies at config load
Malformed trusted_proxies entries were only parsed per request in get_remote_addr, so a typo logged a warning on every proxied request and the entry was skipped, collapsing all clients behind that proxy into one rate-limit bucket. The config now rejects unparseable entries at startup and get_remote_addr no longer needs the fallback. Host bits are accepted (192.168.1.1/24 reads as 192.168.1.0/24) so a common typo doesn't take down safe mode, which copies the auth section verbatim.
* remove path data from thumbnail payloads
The thumbnail data carried a full copy of the object's path, which went out as snapshot.path_data in every events message alongside the top level path_data. Nothing reads the snapshot copy, and the path has no length limit, so it only made events payloads larger.
* hide incompatible frigate+ models behind a toggle
* keep the probe failure detail in the not-configured console message
* use a unique id for each show incompatible models toggle
* pad the bottom of the desktop timeline so zoom buttons don't cover segments
* create the admin row when auth is disabled so notification registrations persist
Installs that never enabled auth had no admin row, so registering for notifications returned 200 but saved nothing. Frigate now creates an admin row with an empty password hash when auth is disabled, and treats that empty hash as first-time setup when auth is enabled later so a password is still generated and printed. Registration returns 404 when no user row was updated, and the success toast only shows after the request succeeds. The Users settings page hides Add User and Reset Password when auth is disabled and notes that accounts only apply once built-in auth is enabled.
* Implement annotated frames mode for GenAI reviews to improve models with lacking temporal understanding
* Updates
* Improve debug sharing
* Do not number objects
* Fix assumptions
* Remove unhelpful content
* Improve object data sent as part of prompt
* Cleanup ollama dumbness
* Bind db
* Fixes
* Cleanup
types-peewee 4.0 types model fields precisely, so 17 `type: ignore` comments and 2 `cast(str, ...)` calls are no longer needed. Its stubs type `.namedtuples()` and `.dicts()` queries as returning model instances, so the review cleanup reads namedtuple fields by name and the storage usage query casts its dict rows. `start_time` is declared `DateTimeField` but stores unix timestamps, so two reads cast it like `debug_replay.py` already does. `Export` gets an annotation for the `export_case_id` attribute peewee adds at runtime.
* pin genai review frames to the main stream
* retain previews as long as either stream has recordings
* watch sub stream recording health separately from main
* reject record_sub on the same input as record and document the role
* derive recording paths from the cache segment timestamp
Recording paths carry one second of resolution, but since sub stream recording start times are resolved to fractional wall clock, anchored to the cache file mtime and chained to the previous segment's end. A stream cutting segments faster than once a second resolves consecutive segments into the same second, so two rows collide on the unique path index and the batch insert fails. The cache segment name is unique per camera stream and second by construction because ffmpeg names segments with strftime, so the recording path is now built from that timestamp while the row keeps the resolved start time. This also restores the path semantics from before sub stream recording, when start times came straight from the cache filename.
Nothing derives times from recording paths: playback offsets, stream switching, and export all use the row's start time, which is unchanged, and the recordings sync matches files by exact path string.
* keep the rest of a recording batch when one row conflicts
* only publish record_sub status when a sub stream is configured
* don't shadow camera_cfg when publishing empty cache streams
* back off restarts when a recording stream goes stale
* give the shared sub stream grace on any capture thread reset
* include segment details in recording discard warnings
* Guard object processor queue handlers against unknown cameras
* Skip embeddings post processing for removed cameras
* End review segments for removed cameras
* Drop queued autotracker moves for removed cameras
* Release tracked event thumbnails when skipping a removed camera
* Add locked accessors for camera states
* Read camera states through the processor accessors
* Guard output and recording paths against cameras not yet known
* Resolve camera state once in ONVIF, notification, and transcription paths
* Move openai specific workaround so it doesn't apply to other providers
* Fix gemini tool calling
* Improve efficiency of frame listing for previews
* debug replay fixes
- initial selection without changing the radio button in the dialog would select 1 hour (rather than 1 minute)
- use CLIPS_DIR instead of CACHE_DIR so that longer replay clips don't cause tmpfs cache overflows
* don't re-render the tracking details overlay on every video time tick
* change pinned to planned
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* Reduce max frames per second to 1
* Use pydantic but don't fail if some constraints are not met.
* Adjust limits
* Adjust limits
* Cleanup
* add unsaved changes icon/popover to individual settings section
* allow changing camera friendly_name from camera management pane
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* Test for image token usage in llama.cpp so we can more appropriately decide how many frames to include
* Limit based on frames per second
* handle zone case sensitivity
* Improve formatting
* Add observations field so model can build CoT before outputting used fields
* fix mobile export crash by removing stale iOS non-modal drawer workaround
* Remove titlecase to avoid Gemma4 handling plain labels as proper nouns
* Improve titling:
* Make directions more clear
* Properly capitalize delivery services
* update dispatcher config reference on save
* subscribe to review topic so ReviewDescriptionProcessor knows genai is enabled
* auto-send ON genai review WS message when enabled_in_config transitions to true
* remove unused object level
* update docs to clarify pre/post capture settings
* add ui docs links
* improve known_plates field in settings UI
* only show save all when multiple sections are changed
or if the section being changed is not currently being viewed
* fix docs
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Switch to a feature-based roles so it is easier to choose models for different tasks
* Fallback and try llama-swap format
* List models supported by provider
* Cleanup
* Add frontend
* Improve model loading
* Make it possible to update genai without restarting
* Cleanup
* Cleanup
* Mypy
* Use different association method
* Clarify
* Remove extra details from ollama schema
* Fix Gemini Chat
* Fix incorrect instructions
* Improve name handling
* Change order of information for llama.cpp
* Simplify prompt
* Fix formatting
* Add shortSummary field to review summary to be used for notifications
* pull in current config version into default config
* fix crash when dynamically adding cameras
depending on where we are in the update loop, camera configs might not be updated yet and we are receiving detections already
* add no tracked objects and icon to explore summary view
* reset add camera wizard when closing and saving
* don't flash no exports icon while loading
* Improve handling of homekit config
* Increase prompt tokens reservation
* Adjust
* Catch event not found object detection
* Use thread lock for JinaV2 in onnxruntime
* remove incorrect embeddings process from memray docs
* only show transcribe button if audio event has video
* apply aspect ratio and margin constraints to path overlay in detail stream on mobile
improves a specific case where the overlay was not aligned with 4:3 cameras on mobile phones
* show metadata title as tooltip on icon hover in detail stream
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* Send preferred language for report service
* make object lifecycle scrollable in tracking details
* fix info popovers in live camera drawer
* ensure metrics are initialized if genai is enabled
* docs
* ollama cloud model docs
* Ensure object descriptions get claened up
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* conditionally display actions for admin role only
* only allow admins to save annotation offset
* Fix classification reset filter
* fix explore context menu from blocking pointer events on the body element after dialog close
applying modal=false to the menu (not to the dialog) to fix this in the same way as elsewhere in the codebase
* add select all link to face library, classification, and explore
* Disable iOS image dragging for classification card
* add proxmox ballooning comment
* lpr docs tweaks
* yaml list
* clarify tls_insecure
* Improve security summary format and usefulness
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Remove source_type from API
* Don't require state classification models to select all classes
* Specifically validate provided end_time for manual events
* Remove yolov9 specification for warning
* Remove warning for coral
* clarify zone name tip
* clarify replace rules in lpr docs
* remove periods
* Add explanation for review report
* adjust HLS gap controller params
defaults to false, should help to recover from hangs and stalling in tracking details videos on chrome
* only redirect to login page once on 401
attempt to fix ios pwa safari redirect storm
* Use contextual information from other cameras to inform report summary
* Formatting and prompt improvements for review summary report
* More improvements to prompt
* Remove examples
* Don't show admin action buttons on export card
* fix redirect race condition
Coordinate 401 redirect logic between ApiProvider and ProtectedRoute using a shared flag to prevent multiple simultaneous redirects that caused UI flashing. Ensure both auth error paths check and set the redirect flag before navigating to login, eliminating race conditions where both mechanisms could trigger at once
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* Don't add to history when opening search dialog
* Update caniuse
* Revamp the history handling for dialog components
* clarify audio transcription docs
* Use titlecase helper
* Allow running object clasasification on stationary objects
* small spacing tweaks for tablets
* require admin role to delete users
* explicitly prevent deletion of admin user
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* don't flatten the search result cache when updating
this would cause an infinite swr fetch if something was mutated and then fetch was called again
* Properly sort keys for recording summary in StorageMetrics
* tracked object description box tweaks
* Remove ability to right click on elements inside of face popup
* Update reprocess message
* don't show object track until video metadata is loaded
* fix blue line height calc for in progress events
* Use timeline tab by default for notifications but add a query arg for customization
* Try and improve notification opening behavior
* Reduce review item buffering behavior
* ensure logging config is passed to camera capture and tracker processes
* ensure on demand recording stops when browser closes
* improve active line progress height with resize observer
* remove icons and duplicate find similar link in explore context menu
* fix for initial broken image when creating trigger from explore
* display friendly names for triggers in toasts
* lpr and triggers docs updates
* remove icons from dropdowns in face and classification
* fix comma dangle linter issue
* re-add incorrectly removed face library button icons
* fix sidebar nav links on < 768px desktop layout
* allow text to wrap on mark as reviewed button
* match exact pixels
* clarify LPR docs
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Don't warn when event ids have expired for trigger sync
* Import faster_whisper conditinally to avoid illegal instruction
* Catch OpenVINO runtime error
* fix race condition in detail stream context
navigating between tracked objects in Explore would sometimes prevent the object track from appearing
* Handle case where classification images are deleted
* Adjust default rounded corners on larger screens
* Improve flow handling for classification state
* Remove images when wizard is cancelled
* Improve deletion handling for classes
* Set constraints on review buffers
* Update to support correct data format
* Set minimum duration for recording based review items
* Use friendly name in review genai prompt
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Fix filtering for classification
* Adjust prompt to account for response tokens
* Correctly return response for reprocess
* Use API response to update data instead of trying to re-parse all of the values
* Implement rename class api
* Fix model deletion / rename dialog
* Remove camera spatial context
* Catch error
* Update docs for review descriptions
* Add logging for context tokens used
* Incrase number of images due to lower than expected context usage
* Re-balance the suspicious activity checks
* Adjustments to context sizing
* optimize context usage
* Adjust context usage
* Make title more direct
* Update docs
* Adjust for commutes
* Tweaks
* Don't show no models view in grid
* Add text-md to inputs
* Adjust train title for mobile
* Cleanup prompt more
* Use i18n functions for tooltip
* Fix model complexity causing crash
* Cleanup
* Make prompt more fair and reduce time extension
* Adjust naming of unrecognized objects
* Improve object naming behavior
* Add more context image levels
* Map verified objects to their sub label directly
* Simplify access
* Cleanup
* Add protection for mismatched object and index
* Keep track of verified objects separately
* Make sequence details human-readable so they are used in natural language response
* Cleanup
* Improve prompt and image selection
* Adjust
* Adjust sligtly
* Format time
* Adjust frame selection logic
* Debug save response
* Ignore extra fields
* Adjust docs
* Generate review item summaries with requests
* Adjust logic to only send important items
* Don't mention ladder
* Adjust prompt to be more specific
* Add more relaxed nature for normal activity
* Cleanup summary
* Update ollama client
* Add more directions to analyze the frames in order
* Remove environment from prompt
* Don't default to openai
* Improve UI
* Allow configuring additional concerns that users may want the AI to note
* Formatting
* Add preferred language config
* Remove unused
* Include extra level for normal activity
* Add dynamic toggling
* Update docs
* Add different threshold for genai
* Adjust webUI for object and review description feature
* Adjust config
* Send on startup
* Cleanup config setting
* Set config
* Fix config name
