mirror of
https://github.com/blakeblackshear/frigate.git
synced 2025-12-06 13:34:13 +03:00
ff56262c6e
* Try using RTSP for restream * Add ability to get snapshot of birdseye when birdseye restream is enabled * Write to pipe instead of encoding mpeg1 * Write to cache instead * Use const for location * Formatting * Add hardware encoding for birdseye based on ffmpeg preset * Provide framerate * Adjust args * Fix order * Delete pipe file if it exists * Cleanup spacing * Fix spacing
41 lines
1.9 KiB
Markdown
41 lines
1.9 KiB
Markdown
---
|
|
id: live
|
|
title: Live View
|
|
---
|
|
|
|
Frigate has different live view options, some of which require [restream](restream.md) to be enabled.
|
|
|
|
## Live View Options
|
|
|
|
Live view options can be selected while viewing the live stream. The options are:
|
|
|
|
| Source | Latency | Frame Rate | Resolution | Audio | Requires Restream | Other Limitations |
|
|
| ------ | ------- | -------------------------------------- | -------------- | ---------------------------- | ----------------- | --------------------- |
|
|
| jsmpeg | low | same as `detect -> fps`, capped at 10 | same as detect | no | no | none |
|
|
| mse | low | native | native | yes (depends on audio codec) | yes | not supported on iOS |
|
|
| webrtc | lowest | native | native | yes (depends on audio codec) | yes | requires extra config |
|
|
|
|
### WebRTC extra configuration:
|
|
|
|
webRTC works by creating a websocket connection on extra ports. One of the following is required for webRTC to work:
|
|
* Frigate is run with `network_mode: host` to support automatic UDP port pass through locally and remotely. See https://github.com/AlexxIT/go2rtc#module-webrtc for more details
|
|
* Frigate is run with `network_mode: bridge` and has:
|
|
* Router setup to forward port `8555` to port `8555` on the frigate device.
|
|
* For local webRTC, you will need to create your own go2rtc config:
|
|
|
|
```yaml
|
|
webrtc:
|
|
listen: ":8555"
|
|
candidates:
|
|
- <frigate host ip address>:8555 # <--- enter frigate host IP here
|
|
- stun:8555
|
|
```
|
|
|
|
and pass that config to frigate via docker or `frigate-go2rtc.yaml` for addon users:
|
|
|
|
See https://github.com/AlexxIT/go2rtc#module-webrtc for more details
|
|
|
|
```yaml
|
|
volumes:
|
|
- /path/to/your/go2rtc.yaml:/config/frigate-go2rtc.yaml:ro
|
|
``` |