mirror of
https://github.com/blakeblackshear/frigate.git
synced 2026-03-26 01:58:21 +03:00
73 lines
2.9 KiB
JSON
73 lines
2.9 KiB
JSON
{
|
|
"label": "ONVIF",
|
|
"description": "ONVIF connection and PTZ autotracking settings for this camera.",
|
|
"host": {
|
|
"label": "ONVIF host",
|
|
"description": "Host (and optional scheme) for the ONVIF service for this camera."
|
|
},
|
|
"port": {
|
|
"label": "ONVIF port",
|
|
"description": "Port number for the ONVIF service."
|
|
},
|
|
"user": {
|
|
"label": "ONVIF username",
|
|
"description": "Username for ONVIF authentication; some devices require admin user for ONVIF."
|
|
},
|
|
"password": {
|
|
"label": "ONVIF password",
|
|
"description": "Password for ONVIF authentication."
|
|
},
|
|
"tls_insecure": {
|
|
"label": "Disable TLS verify",
|
|
"description": "Skip TLS verification and disable digest auth for ONVIF (unsafe; use in safe networks only)."
|
|
},
|
|
"autotracking": {
|
|
"label": "Autotracking",
|
|
"description": "Automatically track moving objects and keep them centered in the frame using PTZ camera movements.",
|
|
"enabled": {
|
|
"label": "Enable Autotracking",
|
|
"description": "Enable or disable automatic PTZ camera tracking of detected objects."
|
|
},
|
|
"calibrate_on_startup": {
|
|
"label": "Calibrate on start",
|
|
"description": "Measure PTZ motor speeds on startup to improve tracking accuracy. Frigate will update config with movement_weights after calibration."
|
|
},
|
|
"zooming": {
|
|
"label": "Zoom mode",
|
|
"description": "Control zoom behavior: disabled (pan/tilt only), absolute (most compatible), or relative (concurrent pan/tilt/zoom)."
|
|
},
|
|
"zoom_factor": {
|
|
"label": "Zoom factor",
|
|
"description": "Control zoom level on tracked objects. Lower values keep more scene in view; higher values zoom in closer but may lose tracking. Values between 0.1 and 0.75."
|
|
},
|
|
"track": {
|
|
"label": "Tracked objects",
|
|
"description": "List of object types that should trigger autotracking."
|
|
},
|
|
"required_zones": {
|
|
"label": "Required zones",
|
|
"description": "Objects must enter one of these zones before autotracking begins."
|
|
},
|
|
"return_preset": {
|
|
"label": "Return preset",
|
|
"description": "ONVIF preset name configured in camera firmware to return to after tracking ends."
|
|
},
|
|
"timeout": {
|
|
"label": "Return timeout",
|
|
"description": "Wait this many seconds after losing tracking before returning camera to preset position."
|
|
},
|
|
"movement_weights": {
|
|
"label": "Movement weights",
|
|
"description": "Calibration values automatically generated by camera calibration. Do not modify manually."
|
|
},
|
|
"enabled_in_config": {
|
|
"label": "Original autotrack state",
|
|
"description": "Internal field to track whether autotracking was enabled in configuration."
|
|
}
|
|
},
|
|
"ignore_time_mismatch": {
|
|
"label": "Ignore time mismatch",
|
|
"description": "Ignore time synchronization differences between camera and Frigate server for ONVIF communication."
|
|
}
|
|
}
|