{
  "label": "ONVIF",
  "description": "ONVIF connection and PTZ autotracking settings for this camera.",
  "host": {
    "label": "ONVIF host",
    "description": "Host (and optional scheme) for the ONVIF service for this camera."
  },
  "port": {
    "label": "ONVIF port",
    "description": "Port number for the ONVIF service."
  },
  "user": {
    "label": "ONVIF username",
    "description": "Username for ONVIF authentication; some devices require admin user for ONVIF."
  },
  "password": {
    "label": "ONVIF password",
    "description": "Password for ONVIF authentication."
  },
  "tls_insecure": {
    "label": "Disable TLS verify",
    "description": "Skip TLS verification and disable digest auth for ONVIF (unsafe; use in safe networks only)."
  },
  "autotracking": {
    "label": "Autotracking",
    "description": "Automatically track moving objects and keep them centered in the frame using PTZ camera movements.",
    "enabled": {
      "label": "Enable Autotracking",
      "description": "Enable or disable automatic PTZ camera tracking of detected objects."
    },
    "calibrate_on_startup": {
      "label": "Calibrate on start",
      "description": "Measure PTZ motor speeds on startup to improve tracking accuracy. Frigate will update config with movement_weights after calibration."
    },
    "zooming": {
      "label": "Zoom mode",
      "description": "Control zoom behavior: disabled (pan/tilt only), absolute (most compatible), or relative (concurrent pan/tilt/zoom)."
    },
    "zoom_factor": {
      "label": "Zoom factor",
      "description": "Control zoom level on tracked objects. Lower values keep more scene in view; higher values zoom in closer but may lose tracking. Values between 0.1 and 0.75."
    },
    "track": {
      "label": "Tracked objects",
      "description": "List of object types that should trigger autotracking."
    },
    "required_zones": {
      "label": "Required zones",
      "description": "Objects must enter one of these zones before autotracking begins."
    },
    "return_preset": {
      "label": "Return preset",
      "description": "ONVIF preset name configured in camera firmware to return to after tracking ends."
    },
    "timeout": {
      "label": "Return timeout",
      "description": "Wait this many seconds after losing tracking before returning camera to preset position."
    },
    "movement_weights": {
      "label": "Movement weights",
      "description": "Calibration values automatically generated by camera calibration. Do not modify manually."
    },
    "enabled_in_config": {
      "label": "Original autotrack state",
      "description": "Internal field to track whether autotracking was enabled in configuration."
    }
  },
  "ignore_time_mismatch": {
    "label": "Ignore time mismatch",
    "description": "Ignore time synchronization differences between camera and Frigate server for ONVIF communication."
  }
}