* don't display audio transcription provider message as health notice
* show remote provider for audio transcription in health pane
* adjust trigger and notifications messages to be consistent with the rest of the settings UI
* disable save buttons when there are no changes in config editor
* fix audio manager crash when a camera is added at runtime
The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update.
`AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors.
* fix stationary max_frames dropping other tracked objects
When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update.
* fix test
* fix skip_motion_threshold permanently disabling motion detection
The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating.
Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back.
* dump ffmpeg logs on every restart
The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`.
* dump ffmpeg logs once per restart
The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section.
* keep all logpipe dumps consistent
* check for a valid frame before using its shape
With the camera offline, no preview frame, and `camera-error.jpg` missing, `latest_frame` read `frame.shape` before its `frame is None` check, so it raised `AttributeError` and answered 500 with a traceback instead of the intended "Unable to get valid frame". The check now runs first.
* fix the has_clip self-heal for events with no recordings
`vod_event` looked for a `(body, 404)` tuple, but `vod_ts` returns a `JSONResponse`, so the check never matched and an old event whose recordings are gone kept offering a clip that can't play. It now checks the response status code.
* return 403 for a snapshot or thumbnail on another camera
The broad `except Exception` handlers in `event_snapshot` and `event_thumbnail` caught the `HTTPException` from `require_camera_access`, so a restricted user asking for another camera's snapshot got a 404 instead of a 403, and for an object still being tracked the snapshot was rendered before the check ran. Both endpoints now look up the event and check access in their own block, the way the other endpoints do, so a denial propagates.
* find DST transitions to the second
`get_dst_transitions` probed the offset once every 24 hours from the start time and reported a change at the first probe after it, up to a day late, so events, review items and recordings near a transition were grouped into days with the old offset. A transition after the last daily probe wasn't found at all. The end of the range is probed too now, and a probe that sees the offset change bisects the interval to the second of the transition.
* don't run page shortcuts for keys a dialog already handled
Radix dismisses a dialog on Escape from a capture-phase keydown listener and calls `preventDefault()` without stopping propagation, so `useKeyboardListener` still ran the page's Escape shortcut: cancelling the delete dialog in the face library or a classification model also cleared the whole selection. Keys another shortcut hook handled still get through, since their listener order changes with every render.
* fix train image filtering for a class with a dash
The backend writes a class with a `-` as `_` in train file names, since it splits those names on `-`, while a dataset folder keeps the dash. Filtering the Train grid by `half-open` compared it with `half_open` and hid every attempt. Both sides are normalized the same way now.
* don't edit a chat message while a reply streams
The edit button stayed active while a reply streamed. `submitConversation` returns early while loading, but the message bubble still closed its editor, so the edit was silently lost. The edit button is hidden while a reply streams, and an editor that's already open keeps its draft with send disabled until the reply ends.
* fix restart failing under non-root
restart_frigate() called psutil.Process(1).terminate() to signal s6-svscan, but s6-svscan runs as root while frigate runs as uid 1000, so the call raised AccessDenied. That exception escaped every caller: the UI restart button dropped its websocket client, MQTT restart and Save & Restart just logged and did nothing, and the watchdog crashed its own monitoring thread on a dead detector. This catches AccessDenied and falls through to the existing SIGINT branch, which exits the process for s6 to restart it.
* show runtime overrides in the settings form
The settings form read a camera section's saved config value, but its dependent warnings (audio transcription requiring audio detection, snapshots requiring detect, etc.) read the live config instead. A runtime toggle from the live view, MQTT, or an active profile can turn a section off without touching yaml, and that override persists across restarts, so the Enable switch showed on while the warning said the feature wasn't enabled. This adds an "Overridden (Live)" badge to any field whose live value differs from what's saved, and swaps the affected warnings to runtime-specific wording when a runtime override is the actual cause instead of the config.
* fix mobile overflowing icons in system due to new health pane
* fix genai settings keeping a stale model and dropping roles after save
Switching a GenAI entry's provider left the previous provider's model selected, so saving wrote a model the new provider doesn't serve. llama.cpp can't find that model in `/v1/models`, so the backend reported every capability as false for the entry, and once the save refetched `genai/models` the roles widget stripped `transcribe` from the form on its own. The section showed unsaved changes right after saving, and saving again would have dropped the role. Switching provider now clears the model, and the roles widget only strips a role for a model or provider picked in the form, since the entry-level capability flags only describe the saved model. A selected role stays visible when the provider can't confirm it, so it can still be switched off. The llama.cpp model list also no longer repeats a model whose alias matches its id, which is what `--alias` produces.
* close onvif sessions on shutdown
`OnvifController.close()` only stopped its event loop, so the aiohttp sessions each `ONVIFCamera` holds and the `_poll_config_updates` task were left to be garbage collected during interpreter shutdown, when their warnings can no longer be logged. Every restart ended with a run of `Unclosed client session` and `Task was destroyed but it is pending!` logging errors, which only became visible once restart started exiting the process itself under non-root. `close()` now closes each camera's client and cancels the tasks on the loop before stopping it.
* fixes
* fixes
Validate config exists 0 regardless of if the config is valid or not.
This makes it not very useful for CI
Tiny fix to bail non-zero if the config is invalid
* Add support for running transcription with GenAI
* Improve audio joining
* Fix GenAI model capability reporting
* Support language correctly
* Migrate existing users to keep english selected
* Fix models
* Fix tests
* Fix accepted null model
* Handle slwo providers
* Implement annotated frames mode for GenAI reviews to improve models with lacking temporal understanding
* Updates
* Improve debug sharing
* Do not number objects
* Fix assumptions
* Remove unhelpful content
* Improve object data sent as part of prompt
* Cleanup ollama dumbness
* Bind db
* Fixes
* Cleanup
* improve zone renaming
Zone rename now saves as one JSON body via config/set, moving required_zones and profile overrides instead of leaving stale references
* fixes
* allow users to select live streaming technology
* fix webrtc being downgraded to mse on load
`useUserPersistence` seeds state with the default and loads asynchronously, so the first render always used `mse` instead of the saved choice, and `useWebRTCGloballyAvailable` reports `checking` until the probe settles and re-enters that state on every consumer mount, so a saved `webrtc` was rewritten to `mse` even after the probe had already passed. On Safari the MSE player then timed out and latched the jsmpeg fallback. A pending probe now counts as available, the player waits on `autoLive` until the stored preferences load, and `handleError` gates on the mode in use since the fallback flag no longer implies webrtc is untried. A rejected IndexedDB read also resolves `loaded` now, so a blocked store can't leave the player waiting forever.
* add support for configurable ICE servers in WebRTC player
* add mic error state, fix dialog overwriting saved choice and dashboard ignoring stream
* tweaks
fix duplicated styles, move fonts to src/assets/fonts for vite to bundle (nginx already rewrites correctly), and fix fast refresh for PreviewController, auth context/provider, and statusbar context
* update date-fns, i18next, react-dropzone, react-markdown and @types/node
react-i18next 17 peers `i18next >= 26.2.0`, so the two move together. react-day-picker already depends on date-fns 4, so date-fns now dedupes to a single copy. react-dropzone 20 declares `node >=22` in `engines`, but npm only warns on Node 20 and nothing in the build needs Node 22.
* update js-yaml, @hookform/resolvers and prettier
js-yaml 5 has no default export, so `DictAsYamlField` imports `dump`, `load` and `YAMLException` by name. @hookform/resolvers 5 types `zodResolver` with the schema's input and output types separately, and fields with defaults are optional on input, so the zone and classification model forms pass both types to `useForm`. zod's range now starts at 3.25, which resolvers 5 requires.
* format with prettier 3.9
* remove unused web test deps
Nothing runs vitest. The CI step that called `npm run test` is commented out, `web/__test__/` was deleted in https://github.com/blakeblackshear/frigate/pull/8983 so `setupFiles` points at a missing file, and there are no unit tests, so `npx vitest run` only picks up the Playwright specs and fails. jsdom, `@testing-library/jest-dom`, msw and fake-indexeddb were only there for vitest.
* update contributing docs
* remove unused deps
konva 10.5 removed the private `Node._lastPos`, so `PolygonCanvas` now reads the dragged point from `getAbsolutePosition()`, which returns the position konva just applied. monaco-yaml 5.5 takes formatter options instead of a boolean for `format`. The radix packages move together so every shared primitive stays a single copy under the `react-slot` and `compose-refs` overrides.
* fix recordings unavailable endpoint when no params are provided
we already import the datetime class directly, so those attribute lookups raised AttributeError and the request returned 500
* reject JWTs whose role is no longer in the config
`/auth` trusted the role inside the JWT and re-signed it on refresh without checking the config, so a user whose restricted role was deleted kept a session carrying a role that isn't in `auth.roles`. The media, clip, recording, export and go2rtc checks treat a missing role the same as a role with no camera list, so that session could open every camera. `/auth` now returns 401 for a token whose role isn't configured, which sends the user back through login, and login already falls back to `viewer` for a role that's gone.
* delete the deleted camera group's layout, not the open one's
Deleting a camera group removed the layout of the group being viewed, because the dialog's delete was bound to `${activeGroup}-draggable-layout`. It also cleared the saved group, and both ran before the `config/set` request whether or not it succeeded, so deleting one group while viewing another lost the open group's layout and left the deleted group's layout behind. The deleted group's own layout is now removed after a successful save, and the saved group is only cleared when it was the open group.
* don't block API when querying PTZ info
camera_ptz_info is async but waited on the ONVIF controller's future with future.result(), blocking the API event loop for as long as a slow or unreachable ONVIF camera took to answer (including reconnect attempts), so every other async request stalled with it. Await the future with asyncio.wrap_future instead. The coroutine runs on the controller's own loop and thread, so this cannot deadlock.
* for custom exports, only allow admin users to add to existing cases
follows the existing convention where attaching an export to an existing case is admin-only on `POST /export/{camera}/...` and `POST /exports/batch`
* drop pending edits for a camera or profile that no longer exists
* match cached preview frames to their camera exactly
https://github.com/blakeblackshear/frigate/pull/22594 added a trailing `-` to the `preview_{camera}` prefix so `camera` stopped matching `camera2`'s frames, but camera names can contain `-`, so `front` still matched `front-door`'s. After a restart, `front`'s preview recorder deleted this hour's frames of a matching camera that sorted before it and added the timestamps of one that sorted after it, so ffmpeg was asked for files that don't exist and that hour's preview was lost. The offline fallback for `latest.jpg` could also return `front-door`'s frame for `front`, even to a user without access to `front-door`, and a short export could take its fallback thumbnail from the other camera. These now compare the full camera name taken from the file name.
* migrate web to eslint 10 flat config
ESLint 10 dropped `.eslintrc` support, so `.eslintrc.cjs` is replaced with `eslint.config.js` and the lint scripts no longer pass `--ext` or `--ignore-path`. typescript-eslint moves to 8, react-hooks to 7, and react-refresh to 0.5, and the unused jest and vitest-globals plugins are removed. Lint behaves as it did before: catch variables aren't checked, unused disable directives aren't reported, and rules newly added to the recommended sets are off until the code passes them. typescript-eslint 8 flags constants used only in `typeof`, so those are now exported, or replaced with a union type where the export would trip react-refresh.
* fix lint findings from the eslint 10 recommended rules
Remove the rule overrides from the flat config migration and fix what they were hiding. Unused catch bindings are dropped, 20 disable directives that suppressed nothing are removed (react-hooks 5.2 and 7.1.1 report identical exhaustive-deps findings with inline config ignored), dead initial values are dropped, short-circuit calls become if statements or optional calls, rethrown errors pass `cause`, and the disabled "No recordings" tooltip in `ReviewTimeline` is removed along with its memo and the `getRecordingAvailability` prop. The 3 react-refresh warnings for files that export contexts or classes are left for a later refactor.
* update docusaurus to 3.10.2
* bump @types/node to 25.9.6 and ES2022
target ES2022, which already includes ES2020 and ES2021.String, so the lib list was also trimmed
* bump vite to 8.3.0 and vitest to 4.1.11
Swap `@vitejs/plugin-react-swc` for `@vitejs/plugin-react` and add `esbuild` as a devDependency, since `vite-plugin-monaco-editor` requires it and Vite 8 no longer ships it. `keepNames` moves to `build.rolldownOptions.output` because Vite 8 ignores the `esbuild` block. Rolldown's minifier now writes the preload helper's base path as a template literal instead of a double-quoted string, so the nginx `sub_filter` for `return"/BASE_PATH/"` stopped matching and lazy-loaded chunks and their CSS were requested from a literal `/BASE_PATH/` under Home Assistant ingress. The rule now matches the backtick form.
* bump apexcharts to 7.3.0 and react-apexcharts to 2.1.1
Under Vite 8, a default import from a CommonJS package resolves to its whole `module.exports` when `package.json` has `"type": "module"`, so react-apexcharts 1.4.1 handed React an object and every chart crashed. 2.x ships an ESM build. apexcharts 7 no longer sets `window.ApexCharts`, so the chart components now import it for `ApexCharts.exec`, and `ApexAxisChartSeries` is derived in `types/graph.ts` because it's no longer a global type.
* remove unused immer dep
* remove unused cython pin from tensorrt requirements
The pin was added alongside tensorrt 8.5.3 and cuda-python 11.8, which needed Cython to build, and both have since been dropped from this file. Nothing imports Cython at runtime, and `pip3 wheel` runs with build isolation, so any source build gets its own build dependencies. The pin only installed an unused Cython wheel into the TensorRT image.
* require node 20.19 for docs
types-peewee 4.0 types model fields precisely, so 17 `type: ignore` comments and 2 `cast(str, ...)` calls are no longer needed. Its stubs type `.namedtuples()` and `.dicts()` queries as returning model instances, so the review cleanup reads namedtuple fields by name and the storage usage query casts its dict rows. `start_time` is declared `DateTimeField` but stores unix timestamps, so two reads cast it like `debug_replay.py` already does. `Export` gets an annotation for the `export_case_id` attribute peewee adds at runtime.
