administrator/frigate
1
0
Fork 0
mirror of https://github.com/blakeblackshear/frigate.git synced 2026-02-09 04:35:25 +03:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

fix spacing

Browse Source
This commit is contained in:
Marc Altmann 2024-03-17 21:09:44 +01:00 committed by GitHub
parent b3a6bd4922
commit 4c8c196c32
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 2 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/docs/configuration/object_detectors.md
View File

@ -369,6 +369,7 @@ These SoCs come with a NPU that will highly speed up detection.
### Setup
Make sure that you use a linux distribution that comes with the rockchip BSP kernel 5.10 or 6.1, supports rknpu (and also vpu, if you want to use hardware video processing) and rknpu driver version 0.9.2 or higher. To check, enter the following commands:
```
$ uname -r
5.10.xxx-rockchip # or 6.1.xxx; the -rockchip suffix is important
@ -385,6 +386,7 @@ Follow Frigate's default installation instructions, but use a docker image with
Next, you need to grant docker permissions to access your hardware:
- During the configuration process, you should run docker in privileged mode to avoid any errors due to insufficient permissions. To do so, add `privileged: true` to your `docker-compose.yml` file or the `--privileged` flag to your docker run command.
- After everything works, you should only grant necessary permissions to increase security. Add the lines below to your `docker-compose.yml` file or the following options to your docker run command: `--security-opt systempaths=unconfined --security-opt apparmor=unconfined --device /dev/dri:/dev/dri --device /dev/dma_heap:/dev/dma_heap --device /dev/rga:/dev/rga --device /dev/mpp_service:/dev/mpp_service`:
```yaml
security_opt:
- apparmor=unconfined
@ -396,7 +398,6 @@ Next, you need to grant docker permissions to access your hardware:
- /dev/mpp_service:/dev/mpp_service # only needed, if you also use VPU
```
### Configuration
This `config.yml` shows all relevant options to configure the detector and explains them. All values shown are the default values (except for one). Lines that are required at least to use the detector are labeled as required, all other lines are optional.