From 4c8c196c3233ce5729e290b79e9840f370d32712 Mon Sep 17 00:00:00 2001
From: Marc Altmann <40744649+MarcA711@users.noreply.github.com>
Date: Sun, 17 Mar 2024 21:09:44 +0100
Subject: [PATCH] fix spacing

---
 docs/docs/configuration/object_detectors.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/docs/docs/configuration/object_detectors.md b/docs/docs/configuration/object_detectors.md
index fec935f68..cf33123f0 100644
--- a/docs/docs/configuration/object_detectors.md
+++ b/docs/docs/configuration/object_detectors.md
@@ -369,6 +369,7 @@ These SoCs come with a NPU that will highly speed up detection.
 ### Setup
 
 Make sure that you use a linux distribution that comes with the rockchip BSP kernel 5.10 or 6.1, supports rknpu (and also vpu, if you want to use hardware video processing) and rknpu driver version 0.9.2 or higher. To check, enter the following commands:
+
 ```
 $ uname -r
 5.10.xxx-rockchip # or 6.1.xxx; the -rockchip suffix is important
@@ -385,6 +386,7 @@ Follow Frigate's default installation instructions, but use a docker image with
 Next, you need to grant docker permissions to access your hardware:
 - During the configuration process, you should run docker in privileged mode to avoid any errors due to insufficient permissions. To do so, add `privileged: true` to your `docker-compose.yml` file or the `--privileged` flag to your docker run command.
 - After everything works, you should only grant necessary permissions to increase security. Add the lines below to your `docker-compose.yml` file or the following options to your docker run command: `--security-opt systempaths=unconfined --security-opt apparmor=unconfined --device /dev/dri:/dev/dri --device /dev/dma_heap:/dev/dma_heap --device /dev/rga:/dev/rga --device /dev/mpp_service:/dev/mpp_service`:
+
 ```yaml
     security_opt:
       - apparmor=unconfined
@@ -396,7 +398,6 @@ Next, you need to grant docker permissions to access your hardware:
       - /dev/mpp_service:/dev/mpp_service # only needed, if you also use VPU
 ```
 
-
 ### Configuration
 
 This `config.yml` shows all relevant options to configure the detector and explains them. All values shown are the default values (except for one). Lines that are required at least to use the detector are labeled as required, all other lines are optional.