frigate/config/config.yml

web_port: 5000

mqtt:
  host: mqtt.server.com
  topic_prefix: frigate
  # user: username # Optional -- Uncomment for use
  # password: password # Optional -- Uncomment for use

cameras:
  backyard:
    rtsp:
      # The camera URL protocol is determined by the key (`rtsp`) above unless overridden by `urlformat`
      user: viewer
      host: 10.0.10.10
      port: 554
      # values that begin with a "$" will be replaced with environment variable
      password: $RTSP_PASSWORD
      path: /cam/realmonitor?channel=1&subtype=2
      regions:
        - size: 350
          x_offset: 0
          y_offset: 300
          min_person_area: 5000
          threshold: 0.5
        - size: 400
          x_offset: 350
          y_offset: 250
          min_person_area: 2000
          threshold: 0.5
        - size: 400
          x_offset: 750
          y_offset: 250
          min_person_area: 2000
          threshold: 0.5      
  front_yard:      
    rtmp:
      user: viewer
      host: 10.0.10.11
      port: 1935
      # values that begin with a "$" will be replaced with environment variable
      password: $RTMP_PASSWORD
      path: /cam/realmonitor?channel=1&subtype=2   
      ffmpeg_input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer
        - -flags
        - low_delay
        - -strict
        - experimental
        - -fflags
        - +genpts+discardcorrupt
        - -vsync
        - drop
        - -use_wallclock_as_timestamps
        - '1'
      regions:
        - size: 350
          x_offset: 0
          y_offset: 300
          min_person_area: 5000
          threshold: 0.5            
  garage:
    rtmp:
      user: viewer
      host: 10.0.10.12
      port: 1935
      # values that begin with a "$" will be replaced with environment variable
      password: $CUSTOM_PASSWORD
      path: /cam/realmonitor?channel=1&subtype=2    
      urlformat: rtmp://{host}:{port}{path}&user={user}&password={password}
      ffmpeg_input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer
        - -flags
        - low_delay
        - -strict
        - experimental
        - -fflags
        - +genpts+discardcorrupt
        - -vsync
        - drop
        - -use_wallclock_as_timestamps
        - '1'            
      regions:
      - size: 350
        x_offset: 0
        y_offset: 300
        min_person_area: 5000
        threshold: 0.5       

    ################
    ## Optional mask. Must be the same dimensions as your video feed.
    ## The mask works by looking at the bottom center of the bounding box for the detected
    ## person in the image. If that pixel in the mask is a black pixel, it ignores it as a
    ## false positive. In my mask, the grass and driveway visible from my backdoor camera 
    ## are white. The garage doors, sky, and trees (anywhere it would be impossible for a 
    ## person to stand) are black.
    ################
    # mask: back-mask.bmp

    ################
    # Allows you to limit the framerate within frigate for cameras that do not support
    # custom framerates. A value of 1 tells frigate to look at every frame, 2 every 2nd frame, 
    # 3 every 3rd frame, etc.
    ################
    # take_frame: 1

    ################
    # Optional hardware acceleration parameters for ffmpeg. If your hardware supports it, it can
    # greatly reduce the CPU power used to decode the video stream. You will need to determine which
    # parameters work for your specific hardware. These may work for those with Intel hardware that
    # supports QuickSync.
    ################
    # ffmpeg_hwaccel_args:
    #   - -hwaccel
    #   - vaapi
    #   - -hwaccel_device
    #   - /dev/dri/renderD128
    #   - -hwaccel_output_format
    #   - yuv420p

    ################
    # FFmpeg log level. Default is "panic". https://ffmpeg.org/ffmpeg.html#Generic-options
    ################
    # ffmpeg_log_level: panic

    ################
    # Optional custom input args. Some cameras may need custom ffmpeg params to work reliably. Specifying
    # these will replace the default input params.
    ################
    # ffmpeg_input_args: []

    ################
    # Optional custom output args. Some cameras may need custom ffmpeg params to work reliably. Specifying
    # these will replace the default output params.
    ################
    # ffmpeg_output_args: []

    ################
    ## Optional URL format. Specifying this will override the default protocol URL format.
    ## Some cameras support the RTMP protocol which may give better performance. 
    ################
    # urlformat: rtmp://{host}:{port}{path}&user={user}&password={password}