.cspell/frigate-dictionary.txt

@@ -1,319 +0,0 @@
-aarch
-absdiff
-airockchip
-Alloc
-alpr
-Amcrest
-amdgpu
-analyzeduration
-Annke
-apexcharts
-arange
-argmax
-argmin
-argpartition
-ascontiguousarray
-astype
-authelia
-authentik
-autodetected
-automations
-autotrack
-autotracked
-autotracker
-autotracking
-balena
-Beelink
-BGRA
-BHWC
-blackshear
-blakeblackshear
-bottombar
-buildx
-castable
-cdist
-Celeron
-cgroups
-chipset
-chromadb
-Chromecast
-cmdline
-codeowner
-CODEOWNERS
-codeproject
-colormap
-colorspace
-comms
-cooldown
-coro
-ctypeslib
-CUDA
-Cuvid
-Dahua
-datasheet
-debconf
-deci
-deepstack
-defragment
-devcontainer
-DEVICEMAP
-discardcorrupt
-dpkg
-dsize
-dtype
-ECONNRESET
-edgetpu
-facenet
-fastapi
-faststart
-fflags
-ffprobe
-fillna
-flac
-foscam
-fourcc
-framebuffer
-fregate
-frégate
-fromarray
-frombuffer
-frontdoor
-fstype
-fullchain
-fullscreen
-genai
-generativeai
-genpts
-getpid
-gpuload
-HACS
-Hailo
-hass
-hconcat
-healthcheck
-hideable
-Hikvision
-homeassistant
-homekit
-homography
-hsize
-hstack
-httpx
-hwaccel
-hwdownload
-hwmap
-hwupload
-iloc
-imagestream
-imdecode
-imencode
-imread
-imwrite
-inpoint
-interp
-iostat
-iotop
-itemsize
-Jellyfin
-jetson
-jetsons
-jina
-jinaai
-joserfc
-jsmpeg
-jsonify
-Kalman
-keepalive
-keepdims
-labelmap
-letsencrypt
-levelname
-LIBAVFORMAT
-libedgetpu
-libnvinfer
-libva
-libwebp
-libx
-libyolo
-linalg
-localzone
-logpipe
-Loryta
-lstsq
-lsusb
-markupsafe
-maxsplit
-MEMHOSTALLOC
-memlimit
-meshgrid
-metadatas
-migraphx
-minilm
-mjpeg
-mkfifo
-mobiledet
-mobilenet
-modelpath
-mosquitto
-mountpoint
-movflags
-mpegts
-mqtt
-mse
-msenc
-namedtuples
-nbytes
-nchw
-ndarray
-ndimage
-nethogs
-newaxis
-nhwc
-NOBLOCK
-nobuffer
-nokey
-NONBLOCK
-noninteractive
-noprint
-Norfair
-nptype
-NTSC
-numpy
-nvenc
-nvhost
-nvml
-nvmpi
-ollama
-onnx
-onnxruntime
-onvif
-ONVIF
-openai
-opencv
-openvino
-overfitting
-OWASP
-paddleocr
-paho
-passwordless
-popleft
-posthog
-postprocess
-poweroff
-preexec
-probesize
-protobuf
-pstate
-psutil
-pubkey
-putenv
-pycache
-pydantic
-pyobj
-pysqlite
-pytz
-pywebpush
-qnap
-quantisation
-Radeon
-radeonsi
-radeontop
-rawvideo
-rcond
-RDONLY
-rebranded
-referer
-reindex
-Reolink
-restream
-restreamed
-restreaming
-rkmpp
-rknn
-rkrga
-rockchip
-rocm
-rocminfo
-rootfs
-rtmp
-RTSP
-ruamel
-scroller
-setproctitle
-setpts
-shms
-SIGUSR
-skylake
-sleeptime
-SNDMORE
-socs
-sqliteq
-sqlitevecq
-ssdlite
-statm
-stimeout
-stylelint
-subclassing
-substream
-superfast
-surveillance
-svscan
-Swipeable
-sysconf
-tailscale
-Tapo
-tensorrt
-tflite
-thresholded
-timelapse
-titlecase
-tmpfs
-tobytes
-toggleable
-traefik
-tzlocal
-Ubiquiti
-udev
-udevadm
-ultrafast
-unichip
-unidecode
-Unifi
-unixepoch
-unraid
-unreviewed
-userdata
-usermod
-uvicorn
-vaapi
-vainfo
-variations
-vbios
-vconcat
-vitb
-vstream
-vsync
-wallclock
-webp
-webpush
-webrtc
-websockets
-webui
-werkzeug
-workdir
-WRONLY
-wsgirefserver
-wsgiutils
-wsize
-xaddr
-xmaxs
-xmins
-XPUB
-XSUB
-ymaxs
-ymins
-yolo
-yolonas
-yolox
-zeep
-zerolatency

.cursor/rules/frontend-always-use-translation-files.mdc

@@ -1,6 +0,0 @@
----
-globs: ["**/*.ts", "**/*.tsx"]
-alwaysApply: false
----
-
-Never write strings in the frontend directly, always write to and reference the relevant translations file.

.devcontainer/devcontainer.json

@@ -8,32 +8,12 @@
   "overrideCommand": false,
   "remoteUser": "vscode",
   "features": {
-    "ghcr.io/devcontainers/features/common-utils:2": {}
-    // Uncomment the following lines to use ONNX Runtime with CUDA support
-    // "ghcr.io/devcontainers/features/nvidia-cuda:1": {
-    //   "installCudnn": true,
-    //   "installNvtx": true,
-    //   "installToolkit": true,
-    //   "cudaVersion": "12.5",
-    //   "cudnnVersion": "9.4.0.58"
-    // },
-    // "./features/onnxruntime-gpu": {}
+    "ghcr.io/devcontainers/features/common-utils:1": {}
   },
-  "forwardPorts": [
-    8971,
-    5000,
-    5001,
-    5173,
-    8554,
-    8555
-  ],
+  "forwardPorts": [5000, 5001, 5173, 1935, 8554, 8555],
   "portsAttributes": {
-    "8971": {
-      "label": "External NGINX",
-      "onAutoForward": "silent"
-    },
     "5000": {
-      "label": "Internal NGINX",
+      "label": "NGINX",
       "onAutoForward": "silent"
     },
     "5001": {
@@ -44,6 +24,10 @@
       "label": "Vite Server",
       "onAutoForward": "silent"
     },
+    "1935": {
+      "label": "RTMP",
+      "onAutoForward": "silent"
+    },
     "8554": {
       "label": "gortc RTSP",
       "onAutoForward": "silent"
@@ -53,73 +37,42 @@
       "onAutoForward": "silent"
     }
   },
-  "customizations": {
-    "vscode": {
-      "extensions": [
-        "ms-python.python",
-        "ms-python.vscode-pylance",
-        "visualstudioexptteam.vscodeintellicode",
-        "mhutchie.git-graph",
-        "ms-azuretools.vscode-docker",
-        "streetsidesoftware.code-spell-checker",
-        "esbenp.prettier-vscode",
-        "dbaeumer.vscode-eslint",
-        "mikestead.dotenv",
-        "csstools.postcss",
-        "blanu.vscode-styled-jsx",
-        "bradlc.vscode-tailwindcss",
-        "charliermarsh.ruff",
-        "eamodio.gitlens"
-      ],
-      "settings": {
-        "remote.autoForwardPorts": false,
-        "python.formatting.provider": "none",
-        "python.languageServer": "Pylance",
-        "editor.formatOnPaste": false,
-        "editor.formatOnSave": true,
-        "editor.formatOnType": true,
-        "python.testing.pytestEnabled": false,
-        "python.testing.unittestEnabled": true,
-        "python.testing.unittestArgs": [
-          "-v",
-          "-s",
-          "./frigate/test"
-        ],
-        "files.trimTrailingWhitespace": true,
-        "eslint.workingDirectories": [
-          "./web"
-        ],
-        "isort.args": [
-          "--settings-path=./pyproject.toml"
-        ],
-        "[python]": {
-          "editor.defaultFormatter": "charliermarsh.ruff",
-          "editor.formatOnSave": true,
-          "editor.codeActionsOnSave": {
-            "source.fixAll": true,
-            "source.organizeImports": true
-          }
-        },
-        "[json][jsonc]": {
-          "editor.defaultFormatter": "esbenp.prettier-vscode"
-        },
-        "[jsx][js][tsx][ts]": {
-          "editor.codeActionsOnSave": [
-            "source.addMissingImports",
-            "source.fixAll"
-          ],
-          "editor.tabSize": 2
-        },
-        "cSpell.ignoreWords": [
-          "rtmp"
-        ],
-        "cSpell.words": [
-          "preact",
-          "astype",
-          "hwaccel",
-          "mqtt"
-        ]
-      }
-    }
+  "extensions": [
+    "ms-python.vscode-pylance",
+    "ms-python.python",
+    "visualstudioexptteam.vscodeintellicode",
+    "mhutchie.git-graph",
+    "ms-azuretools.vscode-docker",
+    "streetsidesoftware.code-spell-checker",
+    "esbenp.prettier-vscode",
+    "dbaeumer.vscode-eslint",
+    "mikestead.dotenv",
+    "csstools.postcss",
+    "blanu.vscode-styled-jsx",
+    "bradlc.vscode-tailwindcss"
+  ],
+  "settings": {
+    "remote.autoForwardPorts": false,
+    "python.linting.pylintEnabled": true,
+    "python.linting.enabled": true,
+    "python.formatting.provider": "black",
+    "python.languageServer": "Pylance",
+    "editor.formatOnPaste": false,
+    "editor.formatOnSave": true,
+    "editor.formatOnType": true,
+    "python.testing.pytestEnabled": false,
+    "python.testing.unittestEnabled": true,
+    "python.testing.unittestArgs": ["-v", "-s", "./frigate/test"],
+    "files.trimTrailingWhitespace": true,
+    "eslint.workingDirectories": ["./web"],
+    "[json][jsonc]": {
+      "editor.defaultFormatter": "esbenp.prettier-vscode"
+    },
+    "[jsx][js][tsx][ts]": {
+      "editor.codeActionsOnSave": ["source.addMissingImports", "source.fixAll"],
+      "editor.tabSize": 2
+    },
+    "cSpell.ignoreWords": ["rtmp"],
+    "cSpell.words": ["preact"]
   }
-}
+}

.devcontainer/features/onnxruntime-gpu/devcontainer-feature.json

@@ -1,22 +0,0 @@
-{
-  "id": "onnxruntime-gpu",
-  "version": "0.0.1",
-  "name": "ONNX Runtime GPU (Nvidia)",
-  "description": "Installs ONNX Runtime for Nvidia GPUs.",
-  "documentationURL": "",
-  "options": {
-    "version": {
-      "type": "string",
-      "proposals": [
-        "latest",
-        "1.20.1",
-        "1.20.0"
-      ],
-      "default": "latest",
-      "description": "Version of ONNX Runtime to install"
-    }
-  },
-  "installsAfter": [
-    "ghcr.io/devcontainers/features/nvidia-cuda"
-  ]
-}

.devcontainer/features/onnxruntime-gpu/install.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-VERSION=${VERSION}
-
-python3 -m pip config set global.break-system-packages true
-# if VERSION == "latest" or VERSION is empty, install the latest version
-if [ "$VERSION" == "latest" ] || [ -z "$VERSION" ]; then
-    python3 -m pip install onnxruntime-gpu
-else
-    python3 -m pip install onnxruntime-gpu==$VERSION
-fi
-
-echo "Done!"

.devcontainer/post_create.sh

@@ -2,25 +2,12 @@
 
 set -euxo pipefail
 
-# Cleanup the old github host key
-if [[ -f ~/.ssh/known_hosts ]]; then
-  # Add new github host key
-  sed -i -e '/AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31\/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi\/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ==/d' ~/.ssh/known_hosts
-  curl -L https://api.github.com/meta | jq -r '.ssh_keys | .[]' | \
-    sed -e 's/^/github.com /' >> ~/.ssh/known_hosts
-fi
-
 # Frigate normal container runs as root, so it have permission to create
 # the folders. But the devcontainer runs as the host user, so we need to
 # create the folders and give the host user permission to write to them.
 sudo mkdir -p /media/frigate
 sudo chown -R "$(id -u):$(id -g)" /media/frigate
 
-# When started as a service, LIBAVFORMAT_VERSION_MAJOR is defined in the
-# s6 service file. For dev, where frigate is started from an interactive
-# shell, we define it in .bashrc instead.
-echo 'export LIBAVFORMAT_VERSION_MAJOR=$("$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)" -version | grep -Po "libavformat\W+\K\d+")' >> "$HOME/.bashrc"
-
 make version
 
 cd web

.github/DISCUSSION_TEMPLATE/camera-support.yml

@@ -1,138 +0,0 @@
-title: "[Camera Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions for an issue with your cameras.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: What browser(s) are you using?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/config-support.yml

@@ -1,113 +0,0 @@
-title: "[Config Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions related to Frigate's configuration and config file.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop or simple cut/paste is possible in this field
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/detector-support.yml

@@ -1,87 +0,0 @@
-title: "[Detector Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions related to Frigate's object detectors.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/general-support.yml

@@ -1,130 +0,0 @@
-title: "[Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support for issues that don't fall into any specific category.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: What browser(s) are you using?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/hardware-acceleration-support.yml

@@ -1,120 +0,0 @@
-title: "[HW Accel Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form to submit a support request for hardware acceleration issues.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/question.yml

@@ -1,21 +0,0 @@
-title: "[Question]: "
-labels: ["question"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for questions you have about Frigate.
-
-        Before submitting your question, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        **If you are looking for support, start a new discussion and use a support category.**
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: "What is your question?"
-    validations:
-      required: true

.github/DISCUSSION_TEMPLATE/report-a-bug.yml

@@ -1,149 +0,0 @@
-title: "[Bug]: "
-labels: ["bug", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form to submit a reproducible bug in Frigate or Frigate's UI.
-
-        Before submitting your bug report, please ask the AI with the "Ask AI" button on the [official documentation site][ai] about your issue, [search the discussions][discussions], look at recent open and closed [pull requests][prs], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your bug has already been fixed by the developers or reported by the community.
-
-        **If you are unsure if your issue is actually a bug or not, please submit a support request first.**
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [prs]: https://www.github.com/blakeblackshear/frigate/pulls
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-        [ai]: https://docs.frigate.video
-  - type: checkboxes
-    attributes:
-      label: Checklist
-      description: Please verify that you've followed these steps
-      options:
-        - label: I have updated to the latest available Frigate version.
-          required: true
-        - label: I have cleared the cache of my browser.
-          required: true
-        - label: I have tried a different browser to see if it is related to my browser.
-          required: true
-        - label: I have tried reproducing the issue in [incognito mode](https://www.computerworld.com/article/1719851/how-to-go-incognito-in-chrome-firefox-safari-and-edge.html) to rule out problems with any third party extensions or plugins I have installed.
-        - label: I have asked the AI at https://docs.frigate.video about my issue.
-          required: true
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-      description: Provide a clear and concise description of what the bug is.
-    validations:
-      required: true
-  - type: textarea
-    id: steps
-    attributes:
-      label: Steps to reproduce
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: In which browser(s) are you experiencing the issue with?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of all tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/FUNDING.yml

@@ -1,4 +1,3 @@
 github:
   - blakeblackshear
   - NickM-27
-  - hawkeye217

.github/ISSUE_TEMPLATE/camera_support_request.yml

@@ -0,0 +1,107 @@
+name: Camera Support Request
+description: Support for setting up cameras in Frigate
+title: "[Camera Support]: "
+labels: ["support", "triage"]
+assignees: []
+body:
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the Debug page in the Web UI
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: coral
+    attributes:
+      label: Coral version
+      options:
+        - USB
+        - PCIe
+        - M.2
+        - Dev Board
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +1 @@
 blank_issues_enabled: false
-contact_links:
-  - name: Frigate Support
-    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
-    about: Get support for setting up or troubleshooting Frigate.
-  - name: Frigate Bug Report
-    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
-    about: Report a specific UI or backend bug.

.github/ISSUE_TEMPLATE/config_support_request.yml

@@ -0,0 +1,82 @@
+name: Config Support Request
+description: Support for Frigate configuration
+title: "[Config Support]: "
+labels: ["support", "triage"]
+assignees: []
+body:
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the Debug page in the Web UI
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: coral
+    attributes:
+      label: Coral version
+      options:
+        - USB
+        - PCIe
+        - M.2
+        - Dev Board
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/edgetpu_support_request.yml

@@ -0,0 +1,84 @@
+name: EdgeTpu Support Request
+description: Support for setting up EdgeTPU in Frigate
+title: "[EdgeTPU Support]: "
+labels: ["support", "triage"]
+assignees: []
+body:
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the Debug page in the Web UI
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: coral
+    attributes:
+      label: Coral version
+      options:
+        - USB
+        - PCIe
+        - M.2
+        - Dev Board
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/general_support_request.yml

@@ -0,0 +1,107 @@
+name: General Support Request
+description: General support request for Frigate
+title: "[Support]: "
+labels: ["support", "triage"]
+assignees: []
+body:
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the Debug page in the Web UI
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: coral
+    attributes:
+      label: Coral version
+      options:
+        - USB
+        - PCIe
+        - M.2
+        - Dev Board
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/hwaccel_support_request.yml

@@ -0,0 +1,96 @@
+name: Hardware Acceleration Support Request
+description: Support for setting up GPU hardware acceleration in Frigate
+title: "[HW Accel Support]: "
+labels: ["support", "triage"]
+assignees: []
+body:
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the Debug page in the Web UI
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/actions/setup/action.yml

@@ -1,50 +0,0 @@
-name: 'Setup'
-description: 'Set up QEMU and Buildx'
-inputs:
-  GITHUB_TOKEN:
-    required: true
-outputs:
-  image-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ steps.create-short-sha.outputs.SHORT_SHA }}
-  cache-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:cache
-runs:
-  using: "composite"
-  steps:
-    # Stop docker so we can mount more space at /var/lib/docker
-    - name: Stop docker
-      run: sudo systemctl stop docker
-      shell: bash
-    # This creates a virtual volume at /var/lib/docker to maximize the size
-    # As of 2/14/2024, this results in 97G for docker images
-    - name: Maximize build space
-      uses: easimon/maximize-build-space@master
-      with:
-        remove-dotnet: 'true'
-        remove-android: 'true'
-        remove-haskell: 'true'
-        remove-codeql: 'true'
-        build-mount-path: '/var/lib/docker'
-    - name: Start docker
-      run: sudo systemctl start docker
-      shell: bash
-    - id: lowercaseRepo
-      uses: ASzc/change-string-case-action@v5
-      with:
-        string: ${{ github.repository }}
-    - name: Set up QEMU
-      uses: docker/setup-qemu-action@v3
-    - name: Set up Docker Buildx
-      uses: docker/setup-buildx-action@v3
-    - name: Log in to the Container registry
-      uses: docker/login-action@465a07811f14bebb1938fbed4728c6a1ff8901fc
-      with:
-        registry: ghcr.io
-        username: ${{ github.actor }}
-        password: ${{ inputs.GITHUB_TOKEN }}
-    - name: Create version file
-      run: make version
-      shell: bash
-    - id: create-short-sha
-      run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_OUTPUT
-      shell: bash

.github/dependabot.yml

@@ -13,13 +13,7 @@ updates:
     open-pull-requests-limit: 10
     target-branch: dev
   - package-ecosystem: "pip"
-    directory: "/docker/main"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "pip"
-    directory: "/docker/tensorrt"
+    directory: "/"
     schedule:
       interval: daily
     open-pull-requests-limit: 10
@@ -34,7 +28,5 @@ updates:
     directory: "/docs"
     schedule:
       interval: daily
-    allow:
-      - dependency-name: "@docusaurus/*"
     open-pull-requests-limit: 10
     target-branch: dev

.github/pull_request_template.md

@@ -1,39 +0,0 @@
-## Proposed change
-<!--
-  Thank you!
-
-  If you're introducing a new feature or significantly refactoring existing functionality,
-  we encourage you to start a discussion first. This helps ensure your idea aligns with
-  Frigate's development goals.
-
-  Describe what this pull request does and how it will benefit users of Frigate.
-  Please describe in detail any considerations, breaking changes, etc. that are
-  made in this pull request.
--->
-
-
-## Type of change
-
-- [ ] Dependency upgrade
-- [ ] Bugfix (non-breaking change which fixes an issue)
-- [ ] New feature
-- [ ] Breaking change (fix/feature causing existing functionality to break)
-- [ ] Code quality improvements to existing code
-- [ ] Documentation Update
-
-## Additional information
-
-- This PR fixes or closes issue: fixes #
-- This PR is related to issue:
-
-## Checklist
-
-<!--
-  Put an `x` in the boxes that apply.
--->
-
-- [ ] The code change is tested and works locally.
-- [ ] Local tests pass. **Your PR cannot be merged unless tests pass**
-- [ ] There is no commented out code in this PR.
-- [ ] UI changes including text have used i18n keys and have been added to the `en` locale.
-- [ ] The code has been formatted using Ruff (`ruff format frigate`)

.github/workflows/ci.yml

@@ -1,226 +1,54 @@
 name: CI
 
 on:
-  workflow_dispatch:
   push:
     branches:
       - dev
       - master
-    paths-ignore:
-      - "docs/**"
-
-# only run the latest commit to avoid cache overwrites
-concurrency:
-  group: ${{ github.ref }}
-  cancel-in-progress: true
 
 env:
-  PYTHON_VERSION: 3.11
+  PYTHON_VERSION: 3.9
 
 jobs:
-  amd64_build:
-    runs-on: ubuntu-22.04
-    name: AMD64 Build
+  multi_arch_build:
+    runs-on: ubuntu-latest
+    name: Image Build
     steps:
       - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push amd64 standard build
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: docker/main/Dockerfile
-          push: true
-          platforms: linux/amd64
-          target: frigate
-          tags: ${{ steps.setup.outputs.image-name }}-amd64
-          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
-          cache-to: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
-  arm64_build:
-    runs-on: ubuntu-22.04-arm
-    name: ARM Build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push arm64 standard build
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: docker/main/Dockerfile
-          push: true
-          platforms: linux/arm64
-          target: frigate
-          tags: |
-            ${{ steps.setup.outputs.image-name }}-standard-arm64
-          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
-      - name: Build and push RPi build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rpi
-          files: docker/rpi/rpi.hcl
-          set: |
-            rpi.tags=${{ steps.setup.outputs.image-name }}-rpi
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64,mode=max
-  jetson_jp6_build:
-    runs-on: ubuntu-22.04-arm
-    name: Jetson Jetpack 6
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push TensorRT (Jetson, Jetpack 6)
-        env:
-          ARCH: arm64
-          BASE_IMAGE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-          SLIM_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-          TRT_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp6
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6,mode=max
-  amd64_extra_builds:
-    runs-on: ubuntu-22.04
-    name: AMD64 Extra Build
-    needs:
-      - amd64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push TensorRT (x86 GPU)
-        env:
-          COMPUTE_LEVEL: "50 60 70 80 90"
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-tensorrt
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-tensorrt,mode=max
-      - name: AMD/ROCm general build
-        env:
-          HSA_OVERRIDE: 0
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rocm
-          files: docker/rocm/rocm.hcl
-          set: |
-            rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-rocm,mode=max
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-rocm
-  arm64_extra_builds:
-    runs-on: ubuntu-22.04-arm
-    name: ARM Extra Build
-    needs:
-      - arm64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push Rockchip build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rk
-          files: docker/rockchip/rk.hcl
-          set: |
-            rk.tags=${{ steps.setup.outputs.image-name }}-rk
-            *.cache-from=type=gha
-  synaptics_build:
-    runs-on: ubuntu-22.04-arm
-    name: Synaptics Build
-    needs:
-      - arm64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push Synaptics build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: synaptics
-          files: docker/synaptics/synaptics.hcl
-          set: |
-            synaptics.tags=${{ steps.setup.outputs.image-name }}-synaptics
-            *.cache-from=type=gha
-  # The majority of users running arm64 are rpi users, so the rpi
-  # build should be the primary arm64 image
-  assemble_default_build:
-    runs-on: ubuntu-22.04
-    name: Assemble and push default build
-    needs:
-      - amd64_build
-      - arm64_build
-    steps:
-      - id: lowercaseRepo
-        uses: ASzc/change-string-case-action@v6
-        with:
-          string: ${{ github.repository }}
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
       - name: Log in to the Container registry
-        uses: docker/login-action@184bdaa0721073962dff0199f1fb9940f07167d1
+        uses: docker/login-action@f4ef78c080cd8ba55a85445d5b36e214a81df20a
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Create version file
+        run: make version
       - name: Create short sha
         run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_ENV
-      - uses: int128/docker-manifest-create-action@v2
+      - name: Build and push
+        uses: docker/build-push-action@v3
         with:
-          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}
-          sources: |
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-amd64
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-rpi
+          context: .
+          push: true
+          platforms: linux/amd64,linux/arm64,linux/arm/v7
+          target: frigate
+          tags: |
+            ghcr.io/blakeblackshear/frigate:${{ github.ref_name }}-${{ env.SHORT_SHA }}
+          cache-from: type=gha
+          cache-to: type=gha,mode=max
+      - name: Build and push TensorRT
+        uses: docker/build-push-action@v3
+        with:
+          context: .
+          push: true
+          platforms: linux/amd64
+          target: frigate-tensorrt
+          tags: |
+            ghcr.io/blakeblackshear/frigate:${{ github.ref_name }}-${{ env.SHORT_SHA }}-tensorrt
+          cache-from: type=gha
+          cache-to: type=gha,mode=max

.github/workflows/pull_request.yml

@@ -1,24 +1,40 @@
 name: On pull request
 
-on:
-  pull_request:
-    paths-ignore:
-      - "docs/**"
-      - ".github/*.yml"
-      - ".github/DISCUSSION_TEMPLATE/**"
-      - ".github/ISSUE_TEMPLATE/**"
+on: pull_request
 
 env:
-  DEFAULT_PYTHON: 3.11
+  DEFAULT_PYTHON: 3.9
 
 jobs:
+  build_devcontainer:
+    runs-on: ubuntu-latest
+    name: Build Devcontainer
+    # The Dockerfile contains features that requires buildkit, and since the
+    # devcontainer cli uses docker-compose to build the image, the only way to
+    # ensure docker-compose uses buildkit is to explicitly enable it.
+    env:
+      DOCKER_BUILDKIT: "1"
+    steps:
+      - uses: actions/checkout@v3
+      - uses: actions/setup-node@master
+        with:
+          node-version: 16.x
+      - name: Install devcontainer cli
+        run: npm install --global @devcontainers/cli
+      - name: Build devcontainer
+        run: devcontainer build --workspace-folder .
+      # It would be nice to also test the following commands, but for some
+      # reason they don't work even though in VS Code devcontainer works.
+      # - name: Start devcontainer
+      #   run: devcontainer up --workspace-folder .
+      # - name: Run devcontainer scripts
+      #   run: devcontainer run-user-commands --workspace-folder .
+
   web_lint:
     name: Web - Lint
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
+      - uses: actions/checkout@v3
       - uses: actions/setup-node@master
         with:
           node-version: 16.x
@@ -32,64 +48,55 @@ jobs:
     name: Web - Test
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
+      - uses: actions/checkout@v3
       - uses: actions/setup-node@master
         with:
-          node-version: 20.x
+          node-version: 16.x
       - run: npm install
         working-directory: ./web
-      - name: Build web
-        run: npm run build
+      - name: Test
+        run: npm run test
         working-directory: ./web
-      # - name: Test
-      #   run: npm run test
-      #   working-directory: ./web
 
   python_checks:
     runs-on: ubuntu-latest
     name: Python Checks
     steps:
       - name: Check out the repository
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
+        uses: actions/checkout@v3
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v5.4.0
+        uses: actions/setup-python@v4.4.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Install requirements
         run: |
-          python3 -m pip install -U pip
-          python3 -m pip install -r docker/main/requirements-dev.txt
-      - name: Check formatting
+          pip install pip
+          pip install -r requirements-dev.txt
+      - name: Lint
         run: |
-          ruff format --check --diff frigate migrations docker *.py
-      - name: Check lint
-        run: |
-          ruff check frigate migrations docker *.py
+          python3 -m black frigate --check
 
   python_tests:
     runs-on: ubuntu-latest
     name: Python Tests
     steps:
       - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
+        uses: actions/checkout@v3
       - uses: actions/setup-node@master
         with:
-          node-version: 20.x
-      - name: Install devcontainer cli
-        run: npm install --global @devcontainers/cli
-      - name: Build devcontainer
-        env:
-          DOCKER_BUILDKIT: "1"
-        run: devcontainer build --workspace-folder .
-      - name: Start devcontainer
-        run: devcontainer up --workspace-folder .
-      - name: Run mypy in devcontainer
-        run: devcontainer exec --workspace-folder . bash -lc "python3 -u -m mypy --config-file frigate/mypy.ini frigate"
-      - name: Run unit tests in devcontainer
-        run: devcontainer exec --workspace-folder . bash -lc "python3 -u -m unittest"
+          node-version: 16.x
+      - run: npm install
+        working-directory: ./web
+      - name: Build web
+        run: npm run build
+        working-directory: ./web
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+      - name: Build
+        run: make
+      - name: Run mypy
+        run: docker run --rm --entrypoint=python3 frigate:latest -u -m mypy --config-file frigate/mypy.ini frigate
+      - name: Run tests
+        run: docker run --rm --entrypoint=python3 frigate:latest -u -m unittest

.github/workflows/release.yml

@@ -1,52 +0,0 @@
-name: On release
-
-on:
-  workflow_dispatch:
-  release:
-    types: [published]
-
-jobs:
-  release:
-    runs-on: ubuntu-latest
-
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - id: lowercaseRepo
-        uses: ASzc/change-string-case-action@v6
-        with:
-          string: ${{ github.repository }}
-      - name: Log in to the Container registry
-        uses: docker/login-action@184bdaa0721073962dff0199f1fb9940f07167d1
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Create tag variables
-        env:
-          TAG: ${{ github.ref_name }}
-          LOWERCASE_REPO: ${{ steps.lowercaseRepo.outputs.lowercase }}
-        run: |
-          BUILD_TYPE=$([[ "${TAG}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "stable" || echo "beta")
-          echo "BUILD_TYPE=${BUILD_TYPE}" >> $GITHUB_ENV
-          echo "BASE=ghcr.io/${LOWERCASE_REPO}" >> $GITHUB_ENV
-          echo "BUILD_TAG=${GITHUB_SHA::7}" >> $GITHUB_ENV
-          echo "CLEAN_VERSION=$(echo ${GITHUB_REF##*/} | tr '[:upper:]' '[:lower:]' | sed 's/^[v]//')" >> $GITHUB_ENV
-      - name: Tag and push the main image
-        run: |
-          VERSION_TAG=${BASE}:${CLEAN_VERSION}
-          STABLE_TAG=${BASE}:stable
-          PULL_TAG=${BASE}:${BUILD_TAG}
-          docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${VERSION_TAG}
-          for variant in standard-arm64 tensorrt tensorrt-jp6 rk rocm; do
-            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${VERSION_TAG}-${variant}
-          done
-
-          # stable tag
-          if [[ "${BUILD_TYPE}" == "stable" ]]; then
-            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${STABLE_TAG}
-            for variant in standard-arm64 tensorrt tensorrt-jp6 rk rocm; do
-              docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${STABLE_TAG}-${variant}
-            done
-          fi

.github/workflows/stale.yml

@@ -23,20 +23,4 @@ jobs:
           exempt-pr-labels: "pinned,security,dependencies"
           operations-per-run: 120
       - name: Print outputs
-        env:
-          STALE_OUTPUT: ${{ join(steps.stale.outputs.*, ',') }}
-        run: echo "$STALE_OUTPUT"
-
-  # clean_ghcr:
-  #   name: Delete outdated dev container images
-  #   runs-on: ubuntu-latest
-  #   steps:
-  #     - name: Delete old images
-  #       uses: snok/container-retention-policy@v2
-  #       with:
-  #         image-names: dev-*
-  #         cut-off: 60 days ago UTC
-  #         keep-at-least: 5
-  #         account-type: personal
-  #         token: ${{ secrets.GITHUB_TOKEN }}
-  #         token-type: github-token
+        run: echo ${{ join(steps.stale.outputs.*, ',') }}

.gitignore

@@ -1,22 +1,19 @@
 .DS_Store
-__pycache__
-.mypy_cache
+*.pyc
 *.swp
 debug
 .vscode/*
 !.vscode/launch.json
-config/*
-!config/*.example
+config/config.yml
 models
 *.mp4
+*.ts
 *.db
 *.csv
 frigate/version.py
 web/build
 web/node_modules
 web/coverage
-web/.env
 core
 !/web/**/*.ts
-.idea/*
-.ipynb_checkpoints
+.idea/*

.vscode/launch.json

@@ -3,9 +3,10 @@
   "configurations": [
     {
       "name": "Python: Launch Frigate",
-      "type": "debugpy",
+      "type": "python",
       "request": "launch",
-      "module": "frigate"
+      "module": "frigate",
+      "justMyCode": true
     }
   ]
 }

CODEOWNERS

@@ -1,7 +0,0 @@
-# Community-supported boards
-/docker/tensorrt/ @madsciencetist @NateMeyer
-/docker/tensorrt/*arm64* @madsciencetist
-/docker/tensorrt/*jetson* @madsciencetist
-/docker/rockchip/ @MarcA711
-/docker/rocm/ @harakas
-/docker/hailo8l/ @spanner3003

Dockerfile

@@ -0,0 +1,313 @@
+# syntax=docker/dockerfile:1.2
+
+# https://askubuntu.com/questions/972516/debian-frontend-environment-variable
+ARG DEBIAN_FRONTEND=noninteractive
+
+FROM debian:11 AS base
+
+FROM --platform=linux/amd64 debian:11 AS base_amd64
+
+FROM debian:11-slim AS slim-base
+
+FROM slim-base AS wget
+ARG DEBIAN_FRONTEND
+RUN apt-get update \
+    && apt-get install -y wget xz-utils \
+    && rm -rf /var/lib/apt/lists/*
+WORKDIR /rootfs
+
+FROM base AS nginx
+ARG DEBIAN_FRONTEND
+ARG NGINX_VERSION=1.22.1
+ARG VOD_MODULE_VERSION=1.30
+ARG SECURE_TOKEN_MODULE_VERSION=1.4
+ARG RTMP_MODULE_VERSION=1.2.1
+
+RUN cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list \
+    && sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list \
+    && apt-get update
+
+RUN apt-get -yqq build-dep nginx
+
+RUN apt-get -yqq install --no-install-recommends ca-certificates wget \
+    && update-ca-certificates -f \
+    && mkdir /tmp/nginx \
+    && wget https://nginx.org/download/nginx-${NGINX_VERSION}.tar.gz \
+    && tar -zxf nginx-${NGINX_VERSION}.tar.gz -C /tmp/nginx --strip-components=1 \
+    && rm nginx-${NGINX_VERSION}.tar.gz \
+    && mkdir /tmp/nginx-vod-module \
+    && wget https://github.com/kaltura/nginx-vod-module/archive/refs/tags/${VOD_MODULE_VERSION}.tar.gz \
+    && tar -zxf ${VOD_MODULE_VERSION}.tar.gz -C /tmp/nginx-vod-module --strip-components=1 \
+    && rm ${VOD_MODULE_VERSION}.tar.gz \
+    # Patch MAX_CLIPS to allow more clips to be added than the default 128
+    && sed -i 's/MAX_CLIPS (128)/MAX_CLIPS (1080)/g' /tmp/nginx-vod-module/vod/media_set.h \
+    && mkdir /tmp/nginx-secure-token-module \
+    && wget https://github.com/kaltura/nginx-secure-token-module/archive/refs/tags/${SECURE_TOKEN_MODULE_VERSION}.tar.gz \
+    && tar -zxf ${SECURE_TOKEN_MODULE_VERSION}.tar.gz -C /tmp/nginx-secure-token-module --strip-components=1 \
+    && rm ${SECURE_TOKEN_MODULE_VERSION}.tar.gz \
+    && mkdir /tmp/nginx-rtmp-module \
+    && wget https://github.com/arut/nginx-rtmp-module/archive/refs/tags/v${RTMP_MODULE_VERSION}.tar.gz \
+    && tar -zxf v${RTMP_MODULE_VERSION}.tar.gz -C /tmp/nginx-rtmp-module --strip-components=1 \
+    && rm v${RTMP_MODULE_VERSION}.tar.gz
+
+WORKDIR /tmp/nginx
+
+RUN ./configure --prefix=/usr/local/nginx \
+    --with-file-aio \
+    --with-http_sub_module \
+    --with-http_ssl_module \
+    --with-threads \
+    --add-module=../nginx-vod-module \
+    --add-module=../nginx-secure-token-module \
+    --add-module=../nginx-rtmp-module \
+    --with-cc-opt="-O3 -Wno-error=implicit-fallthrough"
+
+RUN make && make install
+RUN rm -rf /usr/local/nginx/html /usr/local/nginx/conf/*.default
+
+FROM wget AS go2rtc
+ARG TARGETARCH
+WORKDIR /rootfs/usr/local/go2rtc/bin
+RUN wget -qO go2rtc "https://github.com/AlexxIT/go2rtc/releases/download/v0.1-rc.5/go2rtc_linux_${TARGETARCH}" \
+    && chmod +x go2rtc
+
+
+####
+#
+# OpenVino Support
+#
+# 1. Download and convert a model from Intel's Public Open Model Zoo
+# 2. Build libUSB without udev to handle NCS2 enumeration
+#
+####
+# Download and Convert OpenVino model
+FROM base_amd64 AS ov-converter
+ARG DEBIAN_FRONTEND
+
+# Install OpenVino Runtime and Dev library
+COPY requirements-ov.txt /requirements-ov.txt
+RUN apt-get -qq update \
+    && apt-get -qq install -y wget python3 python3-distutils \
+    && wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip" \
+    && pip install -r /requirements-ov.txt
+
+# Get OpenVino Model
+RUN mkdir /models \
+    && cd /models && omz_downloader --name ssdlite_mobilenet_v2 \
+    && cd /models && omz_converter --name ssdlite_mobilenet_v2 --precision FP16
+
+
+# libUSB - No Udev
+FROM wget as libusb-build
+ARG TARGETARCH
+ARG DEBIAN_FRONTEND
+
+# Build libUSB without udev.  Needed for Openvino NCS2 support
+WORKDIR /opt
+RUN apt-get update && apt-get install -y unzip build-essential automake libtool
+RUN wget -q https://github.com/libusb/libusb/archive/v1.0.25.zip -O v1.0.25.zip && \
+    unzip v1.0.25.zip && cd libusb-1.0.25 && \
+    ./bootstrap.sh && \
+    ./configure --disable-udev --enable-shared && \
+    make -j $(nproc --all)
+RUN apt-get update && \
+    apt-get install -y --no-install-recommends libusb-1.0-0-dev && \
+    rm -rf /var/lib/apt/lists/*
+WORKDIR /opt/libusb-1.0.25/libusb
+RUN /bin/mkdir -p '/usr/local/lib' && \
+    /bin/bash ../libtool  --mode=install /usr/bin/install -c libusb-1.0.la '/usr/local/lib' && \
+    /bin/mkdir -p '/usr/local/include/libusb-1.0' && \
+    /usr/bin/install -c -m 644 libusb.h '/usr/local/include/libusb-1.0' && \
+    /bin/mkdir -p '/usr/local/lib/pkgconfig' && \
+    cd  /opt/libusb-1.0.25/ && \
+    /usr/bin/install -c -m 644 libusb-1.0.pc '/usr/local/lib/pkgconfig' && \
+    ldconfig
+
+FROM wget AS models
+
+# Get model and labels
+RUN wget -qO edgetpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite
+RUN wget -qO cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
+COPY labelmap.txt .
+# Copy OpenVino model
+COPY --from=ov-converter /models/public/ssdlite_mobilenet_v2/FP16 openvino-model
+RUN wget -q https://github.com/openvinotoolkit/open_model_zoo/raw/master/data/dataset_classes/coco_91cl_bkgr.txt -O openvino-model/coco_91cl_bkgr.txt
+
+
+
+FROM wget AS s6-overlay
+ARG TARGETARCH
+RUN --mount=type=bind,source=docker/install_s6_overlay.sh,target=/deps/install_s6_overlay.sh \
+    /deps/install_s6_overlay.sh
+
+
+FROM base AS wheels
+ARG DEBIAN_FRONTEND
+ARG TARGETARCH
+
+# Use a separate container to build wheels to prevent build dependencies in final image
+RUN apt-get -qq update \
+    && apt-get -qq install -y \
+    apt-transport-https \
+    gnupg \
+    wget \
+    && apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 9165938D90FDDD2E \
+    && echo "deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi" | tee /etc/apt/sources.list.d/raspi.list \
+    && apt-get -qq update \
+    && apt-get -qq install -y \
+    python3 \
+    python3-dev \
+    wget \
+    # opencv dependencies
+    build-essential cmake git pkg-config libgtk-3-dev \
+    libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
+    libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
+    gfortran openexr libatlas-base-dev libssl-dev\
+    libtbb2 libtbb-dev libdc1394-22-dev libopenexr-dev \
+    libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
+    # scipy dependencies
+    gcc gfortran libopenblas-dev liblapack-dev && \
+    rm -rf /var/lib/apt/lists/*
+
+RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip"
+
+RUN if [ "${TARGETARCH}" = "arm" ]; \
+    then echo "[global]" > /etc/pip.conf \
+    && echo "extra-index-url=https://www.piwheels.org/simple" >> /etc/pip.conf; \
+    fi
+
+COPY requirements.txt /requirements.txt
+RUN pip3 install -r requirements.txt
+
+COPY requirements-wheels.txt /requirements-wheels.txt
+RUN pip3 wheel --wheel-dir=/wheels -r requirements-wheels.txt
+
+# Add TensorRT wheels to another folder
+COPY requirements-tensorrt.txt /requirements-tensorrt.txt
+RUN mkdir -p /trt-wheels && pip3 wheel --wheel-dir=/trt-wheels -r requirements-tensorrt.txt
+
+
+# Collect deps in a single layer
+FROM scratch AS deps-rootfs
+COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
+COPY --from=go2rtc /rootfs/ /
+COPY --from=libusb-build /usr/local/lib /usr/local/lib
+COPY --from=s6-overlay /rootfs/ /
+COPY --from=models /rootfs/ /
+COPY docker/rootfs/ /
+
+
+# Frigate deps (ffmpeg, python, nginx, go2rtc, s6-overlay, etc)
+FROM slim-base AS deps
+ARG TARGETARCH
+
+ARG DEBIAN_FRONTEND
+# http://stackoverflow.com/questions/48162574/ddg#49462622
+ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
+
+# https://github.com/NVIDIA/nvidia-docker/wiki/Installation-(Native-GPU-Support)
+ENV NVIDIA_VISIBLE_DEVICES=all
+ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
+
+ENV PATH="/usr/lib/btbn-ffmpeg/bin:/usr/local/go2rtc/bin:/usr/local/nginx/sbin:${PATH}"
+
+# Install dependencies
+RUN --mount=type=bind,source=docker/install_deps.sh,target=/deps/install_deps.sh \
+    /deps/install_deps.sh
+
+RUN --mount=type=bind,from=wheels,source=/wheels,target=/deps/wheels \
+    pip3 install -U /deps/wheels/*.whl
+
+COPY --from=deps-rootfs / /
+
+RUN ldconfig
+
+EXPOSE 5000
+EXPOSE 1935
+EXPOSE 8554
+EXPOSE 8555
+
+# Fails if cont-init.d fails
+ENV S6_BEHAVIOUR_IF_STAGE2_FAILS=2
+# Wait indefinitely for cont-init.d to finish before starting services
+ENV S6_CMD_WAIT_FOR_SERVICES=1
+ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
+# Give services (including Frigate) 30 seconds to stop before killing them
+# But this is not working currently because of:
+# https://github.com/just-containers/s6-overlay/issues/503
+ENV S6_SERVICES_GRACETIME=30000
+# Configure logging to prepend timestamps, log to stdout, keep 0 archives and rotate on 10MB
+ENV S6_LOGGING_SCRIPT="T 1 n0 s10000000 T"
+# TODO: remove after a new version of s6-overlay is released. See:
+# https://github.com/just-containers/s6-overlay/issues/460#issuecomment-1327127006
+ENV S6_SERVICES_READYTIME=50
+
+ENTRYPOINT ["/init"]
+CMD []
+
+# Frigate deps with Node.js and NPM for devcontainer
+FROM deps AS devcontainer
+
+# Do not start the actual Frigate service on devcontainer as it will be started by VSCode
+# But start a fake service for simulating the logs
+COPY docker/fake_frigate_run /etc/services.d/frigate/run
+
+# Install Node 16
+RUN apt-get update \
+    && apt-get install wget -y \
+    && wget -qO- https://deb.nodesource.com/setup_16.x | bash - \
+    && apt-get install -y nodejs \
+    && rm -rf /var/lib/apt/lists/* \
+    && npm install -g npm@9
+
+WORKDIR /workspace/frigate
+
+RUN apt-get update \
+    && apt-get install make -y \
+    && rm -rf /var/lib/apt/lists/*
+
+RUN --mount=type=bind,source=./requirements-dev.txt,target=/workspace/frigate/requirements-dev.txt \
+    pip3 install -r requirements-dev.txt
+
+CMD ["sleep", "infinity"]
+
+
+# Frigate web build
+# force this to run on amd64 because QEMU is painfully slow
+FROM --platform=linux/amd64 node:16 AS web-build
+
+WORKDIR /work
+COPY web/package.json web/package-lock.json ./
+RUN npm install
+
+COPY web/ ./
+RUN npm run build \
+    && mv dist/BASE_PATH/monacoeditorwork/* dist/assets/ \
+    && rm -rf dist/BASE_PATH
+
+# Collect final files in a single layer
+FROM scratch AS rootfs
+
+WORKDIR /opt/frigate/
+COPY frigate frigate/
+COPY migrations migrations/
+COPY --from=web-build /work/dist/ web/
+
+# Frigate final container
+FROM deps AS frigate
+
+WORKDIR /opt/frigate/
+COPY --from=rootfs / /
+
+# Frigate w/ TensorRT Support as separate image
+FROM frigate AS frigate-tensorrt
+RUN --mount=type=bind,from=wheels,source=/trt-wheels,target=/deps/trt-wheels \
+    pip3 install -U /deps/trt-wheels/*.whl
+
+# Dev Container w/ TRT
+FROM devcontainer AS devcontainer-trt
+
+RUN --mount=type=bind,from=wheels,source=/trt-wheels,target=/deps/trt-wheels \
+    pip3 install -U /deps/trt-wheels/*.whl

LICENSE

@@ -1,6 +1,6 @@
 The MIT License
 
-Copyright (c) 2025 Frigate LLC (Frigate™)
+Copyright (c) 2020 Blake Blackshear
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
@@ -18,4 +18,4 @@ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+SOFTWARE.

Makefile

@@ -1,60 +1,42 @@
 default_target: local
 
 COMMIT_HASH := $(shell git log -1 --pretty=format:"%h"|tail -1)
-VERSION = 0.17.0
+VERSION = 0.12.0
 IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
-GITHUB_REF_NAME ?= $(shell git rev-parse --abbrev-ref HEAD)
-BOARDS= #Initialized empty
-
-include docker/*/*.mk
-
-build-boards: $(BOARDS:%=build-%)
-
-push-boards: $(BOARDS:%=push-%)
+CURRENT_UID := $(shell id -u)
+CURRENT_GID := $(shell id -g)
 
 version:
 	echo 'VERSION = "$(VERSION)-$(COMMIT_HASH)"' > frigate/version.py
-	echo 'VITE_GIT_COMMIT_HASH=$(COMMIT_HASH)' > web/.env
 
 local: version
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag frigate:latest \
-		--load
+	docker buildx build --target=frigate --tag frigate:latest --load .
 
-debug: version
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-	    --build-arg DEBUG=true \
-		--tag frigate:latest \
-		--load
+local-trt: version
+	docker buildx build --target=frigate-tensorrt --tag frigate:latest-tensorrt --load .
 
 amd64:
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/amd64
+	docker buildx build --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) .
+	docker buildx build --platform linux/amd64 --target=frigate-tensorrt --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH)-tensorrt .
 
 arm64:
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/arm64
+	docker buildx build --platform linux/arm64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) .
 
-build: version amd64 arm64
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/arm64/v8,linux/amd64
+armv7:
+	docker buildx build --platform linux/arm/v7 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) .
 
-push: push-boards
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) \
-		--platform linux/arm64/v8,linux/amd64 \
-		--push
+build: version amd64 arm64 armv7
+	docker buildx build --platform linux/arm/v7,linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) .
+
+push: build
+	docker buildx build --push --platform linux/arm/v7,linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) .
+	docker buildx build --push --platform linux/amd64 --target=frigate-tensorrt --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt .
 
 run: local
-	docker run --rm --publish=5000:5000 --volume=${PWD}/config:/config frigate:latest
+	docker run --rm --publish=5000:5000 --volume=${PWD}/config/config.yml:/config/config.yml frigate:latest
 
 run_tests: local
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
-		python3 -u -m unittest
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
-		python3 -u -m mypy --config-file frigate/mypy.ini frigate
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m unittest
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m mypy --config-file frigate/mypy.ini frigate
 
 .PHONY: run_tests

README.md

@@ -1,20 +1,12 @@
 <p align="center">
-  <img align="center" alt="logo" src="docs/static/img/branding/frigate.png">
+  <img align="center" alt="logo" src="docs/static/img/frigate.png">
 </p>
 
-# Frigate NVR™ - Realtime Object Detection for IP Cameras
-
-[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)
-
-<a href="https://hosted.weblate.org/engage/frigate-nvr/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/language-badge.svg" alt="Translation status" />
-</a>
-
-\[English\] | [简体中文](https://github.com/blakeblackshear/frigate/blob/dev/README_CN.md)
+# Frigate - NVR With Realtime Object Detection for IP Cameras
 
 A complete and local NVR designed for [Home Assistant](https://www.home-assistant.io) with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
 
-Use of a GPU or AI accelerator is highly recommended. AI accelerators will outperform even the best CPUs with very little overhead. See Frigate's supported [object detectors](https://docs.frigate.video/configuration/object_detectors/).
+Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but highly recommended. The Coral will outperform even the best CPUs and can process 100+ FPS with very little overhead.
 
 - Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
 - Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary
@@ -24,8 +16,7 @@ Use of a GPU or AI accelerator is highly recommended. AI accelerators will outpe
 - Communicates over MQTT for easy integration into other systems
 - Records video with retention settings based on detected objects
 - 24/7 recording
-- Re-streaming via RTSP to reduce the number of connections to your camera
-- WebRTC & MSE support for low-latency live view
+- Re-streaming via RTMP to reduce the number of connections to your camera
 
 ## Documentation
 
@@ -35,49 +26,20 @@ View the documentation at https://docs.frigate.video
 
 If you would like to make a donation to support development, please use [Github Sponsors](https://github.com/sponsors/blakeblackshear).
 
-## License
-
-This project is licensed under the **MIT License**.
-
-- **Code:** The source code, configuration files, and documentation in this repository are available under the [MIT License](LICENSE). You are free to use, modify, and distribute the code as long as you include the original copyright notice.
-- **Trademarks:** The "Frigate" name, the "Frigate NVR" brand, and the Frigate logo are **trademarks of Frigate LLC** and are **not** covered by the MIT License.
-
-Please see our [Trademark Policy](TRADEMARK.md) for details on acceptable use of our brand assets.
-
 ## Screenshots
 
-### Live dashboard
+Integration into Home Assistant
 
 <div>
-<img width="800" alt="Live dashboard" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
+<a href="docs/static/img/media_browser.png"><img src="docs/static/img/media_browser.png" height=400></a>
+<a href="docs/static/img/notification.png"><img src="docs/static/img/notification.png" height=400></a>
 </div>
 
-### Streamlined review workflow
+Also comes with a builtin UI:
 
 <div>
-<img width="800" alt="Streamlined review workflow" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
+<a href="docs/static/img/home-ui.png"><img src="docs/static/img/home-ui.png" height=400></a>
+<a href="docs/static/img/camera-ui.png"><img src="docs/static/img/camera-ui.png" height=400></a>
 </div>
 
-### Multi-camera scrubbing
-
-<div>
-<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
-</div>
-
-### Built-in mask and zone editor
-
-<div>
-<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
-</div>
-
-## Translations
-
-We use [Weblate](https://hosted.weblate.org/projects/frigate-nvr/) to support language translations. Contributions are always welcome.
-
-<a href="https://hosted.weblate.org/engage/frigate-nvr/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/multi-auto.svg" alt="Translation status" />
-</a>
-
----
-
-**Copyright © 2025 Frigate LLC.**
+![Events](docs/static/img/events-ui.png)

README_CN.md

@@ -1,89 +0,0 @@
-<p align="center">
-  <img align="center" alt="logo" src="docs/static/img/branding/frigate.png">
-</p>
-
-# Frigate NVR™ - 一个具有实时目标检测的本地 NVR
-
-[English](https://github.com/blakeblackshear/frigate) | \[简体中文\]
-
-[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)
-
-<a href="https://hosted.weblate.org/engage/frigate-nvr/-/zh_Hans/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/-/zh_Hans/svg-badge.svg" alt="翻译状态" />
-</a>
-
-一个完整的本地网络视频录像机（NVR），专为[Home Assistant](https://www.home-assistant.io)设计，具备 AI 目标/物体检测功能。使用 OpenCV 和 TensorFlow 在本地为 IP 摄像头执行实时物体检测。
-
-强烈推荐使用 GPU 或者 AI 加速器（例如[Google Coral 加速器](https://coral.ai/products/) 或者 [Hailo](https://hailo.ai/)等）。它们的运行效率远远高于现在的顶级 CPU，并且功耗也极低。
-
-- 通过[自定义组件](https://github.com/blakeblackshear/frigate-hass-integration)与 Home Assistant 紧密集成
-- 设计上通过仅在必要时和必要地点寻找目标，最大限度地减少资源使用并最大化性能
-- 大量利用多进程处理，强调实时性而非处理每一帧
-- 使用非常低开销的画面变动检测（也叫运动检测）来确定运行目标检测的位置
-- 使用 TensorFlow 进行目标检测，并运行在单独的进程中以达到最大 FPS
-- 通过 MQTT 进行通信，便于集成到其他系统中
-- 根据检测到的物体设置保留时间进行视频录制
-- 24/7 全天候录制
-- 通过 RTSP 重新流传输以减少摄像头的连接数
-- 支持 WebRTC 和 MSE，实现低延迟的实时观看
-
-## 社区中文翻译文档
-
-你可以在这里查看文档 https://docs.frigate-cn.video
-
-## 赞助
-
-如果您想通过捐赠支持开发，请使用 [Github Sponsors](https://github.com/sponsors/blakeblackshear)。
-
-## 协议
-
-本项目采用 **MIT 许可证**授权。
-**代码部分**：本代码库中的源代码、配置文件和文档均遵循 [MIT 许可证](LICENSE)。您可以自由使用、修改和分发这些代码，但必须保留原始版权声明。
-
-**商标部分**：“Frigate”名称、“Frigate NVR”品牌以及 Frigate 的 Logo 为 **Frigate LLC 的商标**，**不在** MIT 许可证覆盖范围内。
-有关品牌资产的规范使用详情，请参阅我们的[《商标政策》](TRADEMARK.md)。
-
-## 截图
-
-### 实时监控面板
-
-<div>
-<img width="800" alt="实时监控面板" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
-</div>
-
-### 简单的核查工作流程
-
-<div>
-<img width="800" alt="简单的审查工作流程" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
-</div>
-
-### 多摄像头可按时间轴查看
-
-<div>
-<img width="800" alt="多摄像头可按时间轴查看" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
-</div>
-
-### 内置遮罩和区域编辑器
-
-<div>
-<img width="800" alt="内置遮罩和区域编辑器" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
-</div>
-
-## 翻译
-
-我们使用 [Weblate](https://hosted.weblate.org/projects/frigate-nvr/) 平台提供翻译支持，欢迎参与进来一起完善。
-
-## 非官方中文讨论社区
-
-欢迎加入中文讨论 QQ 群：[1043861059](https://qm.qq.com/q/7vQKsTmSz)
-
-Bilibili：https://space.bilibili.com/3546894915602564
-
-## 中文社区赞助商
-
-[![EdgeOne](https://edgeone.ai/media/34fe3a45-492d-4ea4-ae5d-ea1087ca7b4b.png)](https://edgeone.ai/zh?from=github)
-本项目 CDN 加速及安全防护由 Tencent EdgeOne 赞助
-
----
-
-**Copyright © 2025 Frigate LLC.**

TRADEMARK.md

@@ -1,58 +0,0 @@
-# Trademark Policy
-
-**Last Updated:** November 2025
-
-This document outlines the policy regarding the use of the trademarks associated with the Frigate NVR project.
-
-## 1. Our Trademarks
-
-The following terms and visual assets are trademarks (the "Marks") of **Frigate LLC**:
-
-- **Frigate™**
-- **Frigate NVR™**
-- **Frigate+™**
-- **The Frigate Logo**
-
-**Note on Common Law Rights:**
-Frigate LLC asserts all common law rights in these Marks. The absence of a federal registration symbol (®) does not constitute a waiver of our intellectual property rights.
-
-## 2. Interaction with the MIT License
-
-The software in this repository is licensed under the [MIT License](LICENSE).
-
-**Crucial Distinction:**
-
-- The **Code** is free to use, modify, and distribute under the MIT terms.
-- The **Brand (Trademarks)** is **NOT** licensed under MIT.
-
-You may not use the Marks in any way that is not explicitly permitted by this policy or by written agreement with Frigate LLC.
-
-## 3. Acceptable Use
-
-You may use the Marks without prior written permission in the following specific contexts:
-
-- **Referential Use:** To truthfully refer to the software (e.g., _"I use Frigate NVR for my home security"_).
-- **Compatibility:** To indicate that your product or project works with the software (e.g., _"MyPlugin for Frigate NVR"_ or _"Compatible with Frigate"_).
-- **Commentary:** In news articles, blog posts, or tutorials discussing the software.
-
-## 4. Prohibited Use
-
-You may **NOT** use the Marks in the following ways:
-
-- **Commercial Products:** You may not use "Frigate" in the name of a commercial product, service, or app (e.g., selling an app named _"Frigate Viewer"_ is prohibited).
-- **Implying Affiliation:** You may not use the Marks in a way that suggests your project is official, sponsored by, or endorsed by Frigate LLC.
-- **Confusing Forks:** If you fork this repository to create a derivative work, you **must** remove the Frigate logo and rename your project to avoid user confusion. You cannot distribute a modified version of the software under the name "Frigate".
-- **Domain Names:** You may not register domain names containing "Frigate" that are likely to confuse users (e.g., `frigate-official-support.com`).
-
-## 5. The Logo
-
-The Frigate logo (the bird icon) is a visual trademark.
-
-- You generally **cannot** use the logo on your own website or product packaging without permission.
-- If you are building a dashboard or integration that interfaces with Frigate, you may use the logo only to represent the Frigate node/service, provided it does not imply you _are_ Frigate.
-
-## 6. Questions & Permissions
-
-If you are unsure if your intended use violates this policy, or if you wish to request a specific license to use the Marks (e.g., for a partnership), please contact us at:
-
-**help@frigate.video**

audio-labelmap.txt

@@ -1,521 +0,0 @@
-speech
-speech
-speech
-speech
-babbling
-speech
-yell
-bellow
-whoop
-yell
-yell
-yell
-whispering
-laughter
-laughter
-laughter
-snicker
-laughter
-laughter
-crying
-crying
-crying
-yell
-sigh
-singing
-choir
-sodeling
-chant
-mantra
-child_singing
-synthetic_singing
-rapping
-humming
-groan
-grunt
-whistling
-breathing
-wheeze
-snoring
-gasp
-pant
-snort
-cough
-throat_clearing
-sneeze
-sniff
-run
-shuffle
-footsteps
-chewing
-biting
-gargling
-stomach_rumble
-burping
-hiccup
-fart
-hands
-finger_snapping
-clapping
-heartbeat
-heart_murmur
-cheering
-applause
-chatter
-crowd
-speech
-children_playing
-animal
-pets
-dog
-bark
-yip
-howl
-bow-wow
-growling
-whimper_dog
-cat
-purr
-meow
-hiss
-caterwaul
-livestock
-horse
-clip-clop
-neigh
-cattle
-moo
-cowbell
-pig
-oink
-goat
-bleat
-sheep
-fowl
-chicken
-cluck
-cock-a-doodle-doo
-turkey
-gobble
-duck
-quack
-goose
-honk
-wild_animals
-roaring_cats
-roar
-bird
-chird
-chirp
-squawk
-pigeon
-coo
-crow
-caw
-owl
-hoot
-flapping_wings
-dogs
-rats
-mouse
-patter
-insect
-cricket
-mosquito
-fly
-buzz
-buzz
-frog
-croak
-snake
-rattle
-whale_vocalization
-music
-musical_instrument
-plucked_string_instrument
-guitar
-electric_guitar
-bass_guitar
-acoustic_guitar
-steel_guitar
-tapping
-strum
-banjo
-sitar
-mandolin
-zither
-ukulele
-keyboard
-piano
-electric_piano
-organ
-electronic_organ
-hammond_organ
-synthesizer
-sampler
-harpsichord
-percussion
-drum_kit
-drum_machine
-drum
-snare_drum
-rimshot
-drum_roll
-bass_drum
-timpani
-tabla
-cymbal
-hi-hat
-wood_block
-tambourine
-rattle
-maraca
-gong
-tubular_bells
-mallet_percussion
-marimba
-glockenspiel
-vibraphone
-steelpan
-orchestra
-brass_instrument
-french_horn
-trumpet
-trombone
-bowed_string_instrument
-string_section
-violin
-pizzicato
-cello
-double_bass
-wind_instrument
-flute
-saxophone
-clarinet
-harp
-bell
-church_bell
-jingle_bell
-bicycle_bell
-tuning_fork
-chime
-wind_chime
-change_ringing
-harmonica
-accordion
-bagpipes
-didgeridoo
-shofar
-theremin
-singing_bowl
-scratching
-pop_music
-hip_hop_music
-beatboxing
-rock_music
-heavy_metal
-punk_rock
-grunge
-progressive_rock
-rock_and_roll
-psychedelic_rock
-rhythm_and_blues
-soul_music
-reggae
-country
-swing_music
-bluegrass
-funk
-folk_music
-middle_eastern_music
-jazz
-disco
-classical_music
-opera
-electronic_music
-house_music
-techno
-dubstep
-drum_and_bass
-electronica
-electronic_dance_music
-ambient_music
-trance_music
-music_of_latin_america
-salsa_music
-flamenco
-blues
-music_for_children
-new-age_music
-vocal_music
-a_capella
-music_of_africa
-afrobeat
-christian_music
-gospel_music
-music_of_asia
-carnatic_music
-music_of_bollywood
-ska
-traditional_music
-independent_music
-song
-background_music
-theme_music
-jingle
-soundtrack_music
-lullaby
-video_game_music
-christmas_music
-dance_music
-wedding_music
-happy_music
-sad_music
-tender_music
-exciting_music
-angry_music
-scary_music
-wind
-rustling_leaves
-wind_noise
-thunderstorm
-thunder
-water
-rain
-raindrop
-rain_on_surface
-stream
-waterfall
-ocean
-waves
-steam
-gurgling
-fire
-crackle
-vehicle
-boat
-sailboat
-rowboat
-motorboat
-ship
-motor_vehicle
-car
-honk
-toot
-car_alarm
-power_windows
-skidding
-tire_squeal
-car_passing_by
-race_car
-truck
-air_brake
-air_horn
-reversing_beeps
-ice_cream_truck
-bus
-emergency_vehicle
-police_car
-ambulance
-fire_engine
-motorcycle
-traffic_noise
-rail_transport
-train
-train_whistle
-train_horn
-railroad_car
-train_wheels_squealing
-subway
-aircraft
-aircraft_engine
-jet_engine
-propeller
-helicopter
-fixed-wing_aircraft
-bicycle
-skateboard
-engine
-light_engine
-dental_drill's_drill
-lawn_mower
-chainsaw
-medium_engine
-heavy_engine
-engine_knocking
-engine_starting
-idling
-accelerating
-door
-doorbell
-ding-dong
-sliding_door
-slam
-knock
-tap
-squeak
-cupboard_open_or_close
-drawer_open_or_close
-dishes
-cutlery
-chopping
-frying
-microwave_oven
-blender
-water_tap
-sink
-bathtub
-hair_dryer
-toilet_flush
-toothbrush
-electric_toothbrush
-vacuum_cleaner
-zipper
-keys_jangling
-coin
-scissors
-electric_shaver
-shuffling_cards
-typing
-typewriter
-computer_keyboard
-writing
-alarm
-telephone
-telephone_bell_ringing
-ringtone
-telephone_dialing
-dial_tone
-busy_signal
-alarm_clock
-siren
-civil_defense_siren
-buzzer
-smoke_detector
-fire_alarm
-foghorn
-whistle
-steam_whistle
-mechanisms
-ratchet
-clock
-tick
-tick-tock
-gears
-pulleys
-sewing_machine
-mechanical_fan
-air_conditioning
-cash_register
-printer
-camera
-single-lens_reflex_camera
-tools
-hammer
-jackhammer
-sawing
-filing
-sanding
-power_tool
-drill
-explosion
-gunshot
-machine_gun
-fusillade
-artillery_fire
-cap_gun
-fireworks
-firecracker
-burst
-eruption
-boom
-wood
-chop
-splinter
-crack
-glass
-chink
-shatter
-liquid
-splash
-slosh
-squish
-drip
-pour
-trickle
-gush
-fill
-spray
-pump
-stir
-boiling
-sonar
-arrow
-whoosh
-thump
-thunk
-electronic_tuner
-effects_unit
-chorus_effect
-basketball_bounce
-bang
-slap
-whack
-smash
-breaking
-bouncing
-whip
-flap
-scratch
-scrape
-rub
-roll
-crushing
-crumpling
-tearing
-beep
-ping
-ding
-clang
-squeal
-creak
-rustle
-whir
-clatter
-sizzle
-clicking
-clickety-clack
-rumble
-plop
-jingle
-hum
-zing
-boing
-crunch
-silence
-sine_wave
-harmonic
-chirp_tone
-sound_effect
-pulse
-inside
-inside
-inside
-outside
-outside
-reverberation
-echo
-noise
-environmental_noise
-static
-mains_hum
-distortion
-sidetone
-cacophony
-white_noise
-pink_noise
-throbbing
-vibration
-television
-radio
-field_recording

benchmark.py

@@ -1,16 +1,15 @@
-import datetime
-import multiprocessing as mp
+import os
 from statistics import mean
-
+import multiprocessing as mp
 import numpy as np
-
+import datetime
 from frigate.config import DetectorTypeEnum
-from frigate.object_detection.base import (
+from frigate.object_detection import (
+    LocalObjectDetector,
     ObjectDetectProcess,
     RemoteObjectDetector,
     load_labels,
 )
-from frigate.util.process import FrigateProcess
 
 my_frame = np.expand_dims(np.full((300, 300, 3), 1, np.uint8), axis=0)
 labels = load_labels("/labelmap.txt")
@@ -54,14 +53,14 @@ def start(id, num_detections, detection_queue, event):
     frame_times = []
     for x in range(0, num_detections):
         start_frame = datetime.datetime.now().timestamp()
-        object_detector.detect(my_frame)
+        detections = object_detector.detect(my_frame)
         frame_times.append(datetime.datetime.now().timestamp() - start_frame)
 
     duration = datetime.datetime.now().timestamp() - start
     object_detector.cleanup()
     print(f"{id} - Processed for {duration:.2f} seconds.")
     print(f"{id} - FPS: {object_detector.fps.eps():.2f}")
-    print(f"{id} - Average frame processing time: {mean(frame_times) * 1000:.2f}ms")
+    print(f"{id} - Average frame processing time: {mean(frame_times)*1000:.2f}ms")
 
 
 ######
@@ -91,7 +90,7 @@ edgetpu_process_2 = ObjectDetectProcess(
 )
 
 for x in range(0, 10):
-    camera_process = FrigateProcess(
+    camera_process = mp.Process(
         target=start, args=(x, 300, detection_queue, events[str(x)])
     )
     camera_process.daemon = True

benchmark_motion.py

@@ -1,118 +0,0 @@
-import datetime
-import multiprocessing as mp
-import os
-
-import cv2
-import numpy as np
-
-from frigate.config import MotionConfig
-from frigate.motion.improved_motion import ImprovedMotionDetector
-from frigate.util import create_mask
-
-# get info on the video
-# cap = cv2.VideoCapture("debug/front_cam_2023_05_23_08_41__2023_05_23_08_43.mp4")
-# cap = cv2.VideoCapture("debug/motion_test_clips/rain_1.mp4")
-cap = cv2.VideoCapture("debug/motion_test_clips/lawn_mower_night_1.mp4")
-# cap = cv2.VideoCapture("airport.mp4")
-width = int(cap.get(cv2.CAP_PROP_FRAME_WIDTH))
-height = int(cap.get(cv2.CAP_PROP_FRAME_HEIGHT))
-fps = cap.get(cv2.CAP_PROP_FPS)
-frame_shape = (height, width, 3)
-# Nick back:
-# "1280,0,1280,316,1170,216,1146,126,1016,127,979,82,839,0",
-# "310,350,300,402,224,405,241,354",
-# "378,0,375,26,0,23,0,0",
-# Front door:
-# "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
-# "336,833,438,1024,346,1093,103,1052,24,814",
-# Back
-# "1855,0,1851,100,1289,96,1105,161,1045,119,890,121,890,0",
-# "505,95,506,138,388,153,384,114",
-# "689,72,689,122,549,134,547,89",
-# "261,134,264,176,169,195,167,158",
-# "145,159,146,202,70,220,65,183",
-
-mask = create_mask(
-    (height, width),
-    [
-        "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
-        "336,833,438,1024,346,1093,103,1052,24,814",
-    ],
-)
-
-# create the motion config
-motion_config_1 = MotionConfig()
-motion_config_1.mask = np.zeros((height, width), np.uint8)
-motion_config_1.mask[:] = mask
-# motion_config_1.improve_contrast = 1
-motion_config_1.frame_height = 150
-# motion_config_1.frame_alpha = 0.02
-# motion_config_1.threshold = 30
-# motion_config_1.contour_area = 10
-
-motion_config_2 = MotionConfig()
-motion_config_2.mask = np.zeros((height, width), np.uint8)
-motion_config_2.mask[:] = mask
-# motion_config_2.improve_contrast = 1
-motion_config_2.frame_height = 150
-# motion_config_2.frame_alpha = 0.01
-motion_config_2.threshold = 20
-# motion_config.contour_area = 10
-
-save_images = True
-
-improved_motion_detector_1 = ImprovedMotionDetector(
-    frame_shape=frame_shape,
-    config=motion_config_1,
-    fps=fps,
-    improve_contrast=mp.Value("i", motion_config_1.improve_contrast),
-    threshold=mp.Value("i", motion_config_1.threshold),
-    contour_area=mp.Value("i", motion_config_1.contour_area),
-    name="default",
-)
-improved_motion_detector_1.save_images = save_images
-
-improved_motion_detector_2 = ImprovedMotionDetector(
-    frame_shape=frame_shape,
-    config=motion_config_2,
-    fps=fps,
-    improve_contrast=mp.Value("i", motion_config_2.improve_contrast),
-    threshold=mp.Value("i", motion_config_2.threshold),
-    contour_area=mp.Value("i", motion_config_2.contour_area),
-    name="compare",
-)
-improved_motion_detector_2.save_images = save_images
-
-# read and process frames
-ret, frame = cap.read()
-frame_counter = 1
-while ret:
-    yuv_frame = cv2.cvtColor(frame, cv2.COLOR_BGR2YUV_I420)
-
-    start_frame = datetime.datetime.now().timestamp()
-    improved_motion_detector_1.detect(yuv_frame)
-
-    start_frame = datetime.datetime.now().timestamp()
-    improved_motion_detector_2.detect(yuv_frame)
-
-    default_frame = f"debug/frames/default-{frame_counter}.jpg"
-    compare_frame = f"debug/frames/compare-{frame_counter}.jpg"
-    if os.path.exists(default_frame) and os.path.exists(compare_frame):
-        images = [
-            cv2.imread(default_frame),
-            cv2.imread(compare_frame),
-        ]
-
-        cv2.imwrite(
-            f"debug/frames/all-{frame_counter}.jpg",
-            cv2.vconcat(images)
-            if frame_shape[0] > frame_shape[1]
-            else cv2.hconcat(images),
-        )
-        os.unlink(default_frame)
-        os.unlink(compare_frame)
-    frame_counter += 1
-
-    ret, frame = cap.read()
-
-cap.release()

cspell.json

@@ -1,22 +0,0 @@
-{
-  "version": "0.2",
-  "ignorePaths": [
-    "Dockerfile",
-    "Dockerfile.*",
-    "CMakeLists.txt",
-    "*.db",
-    "node_modules",
-    "__pycache__",
-    "dist",
-    "/audio-labelmap.txt"
-  ],
-  "language": "en",
-  "dictionaryDefinitions": [
-    {
-      "name": "frigate-dictionary",
-      "path": "./.cspell/frigate-dictionary.txt",
-      "addWords": true
-    }
-  ],
-  "dictionaries": ["frigate-dictionary"]
-}

docker-compose.yml

@@ -1,8 +1,8 @@
+version: "3"
 services:
   devcontainer:
     container_name: frigate-devcontainer
-    # Check host system's actual render/video/plugdev group IDs with 'getent group render', 'getent group video', and 'getent group plugdev'
-    # Must add these exact IDs in container's group_add section or OpenVINO GPU acceleration will fail
+    # add groups from host for render, plugdev, video
     group_add:
       - "109" # render
       - "110" # render
@@ -11,32 +11,29 @@ services:
     shm_size: "256mb"
     build:
       context: .
-      dockerfile: docker/main/Dockerfile
       # Use target devcontainer-trt for TensorRT dev
       target: devcontainer
-    ## Uncomment this block for nvidia gpu support
-    # deploy:
-    #       resources:
-    #           reservations:
-    #               devices:
-    #                   - driver: nvidia
-    #                     count: 1
-    #                     capabilities: [gpu]
-    environment:
-      YOLO_MODELS: ""
-    # devices:
-      # - /dev/bus/usb:/dev/bus/usb # Uncomment for Google Coral USB
+    deploy:
+          resources:
+              reservations:
+                  devices:
+                      - driver: nvidia
+                        count: 1
+                        capabilities: [gpu]
+    devices:
+      - /dev/bus/usb:/dev/bus/usb
       # - /dev/dri:/dev/dri # for intel hwaccel, needs to be updated for your hardware
     volumes:
       - .:/workspace/frigate:cached
       - ./web/dist:/opt/frigate/web:cached
       - /etc/localtime:/etc/localtime:ro
-      - ./config:/config
+      - ./config/config.yml:/config/config.yml:ro
       - ./debug:/media/frigate
-     # - /dev/bus/usb:/dev/bus/usb # Uncomment for Google Coral USB
+      # Create the trt-models folder using the documented method of generating TRT models
+      # - ./debug/trt-models:/trt-models
+      - /dev/bus/usb:/dev/bus/usb
   mqtt:
     container_name: mqtt
-    image: eclipse-mosquitto:2.0
-    command: mosquitto -c /mosquitto-no-auth.conf # enable no-auth mode
+    image: eclipse-mosquitto:1.6
     ports:
       - "1883:1883"

docker/fake_frigate_run

@@ -0,0 +1,8 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the fake Frigate service
+
+while true; do
+  echo "The fake Frigate service is running..."
+  sleep 5s
+done

docker/hailo8l/user_installation.sh

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-# Update package list and install dependencies
-sudo apt-get update
-sudo apt-get install -y build-essential cmake git wget
-
-hailo_version="4.21.0"
-arch=$(uname -m)
-
-if [[ $arch == "x86_64" ]]; then
-    sudo apt install -y linux-headers-$(uname -r);
-else
-    sudo apt install -y linux-modules-extra-$(uname -r);
-fi
-
-# Clone the HailoRT driver repository
-git clone --depth 1 --branch v${hailo_version} https://github.com/hailo-ai/hailort-drivers.git
-
-# Build and install the HailoRT driver
-cd hailort-drivers/linux/pcie
-sudo make all
-sudo make install
-
-# Load the Hailo PCI driver
-sudo modprobe hailo_pci
-
-if [ $? -ne 0 ]; then
-  echo "Unable to load hailo_pci module, common reasons for this are:"
-  echo "- Key was rejected by service: Secure Boot is enabling disallowing install."
-  echo "- Permissions are not setup correctly."
-  exit 1
-fi
-
-# Download and install the firmware
-cd ../../
-./download_firmware.sh
-
-# verify the firmware folder is present
-if [ ! -d /lib/firmware/hailo ]; then
-  sudo mkdir /lib/firmware/hailo
-fi
-sudo mv hailo8_fw.*.bin /lib/firmware/hailo/hailo8_fw.bin
-
-# Install udev rules
-sudo cp ./linux/pcie/51-hailo-udev.rules /etc/udev/rules.d/
-sudo udevadm control --reload-rules && sudo udevadm trigger
-
-echo "HailoRT driver installation complete."
-echo "reboot your system to load the firmware!"

docker/install_deps.sh

@@ -0,0 +1,81 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+apt-get -qq update
+
+apt-get -qq install --no-install-recommends -y \
+    apt-transport-https \
+    gnupg \
+    wget \
+    procps vainfo \
+    unzip locales tzdata libxml2 xz-utils \
+    python3-pip
+
+# add raspberry pi repo
+mkdir -p -m 600 /root/.gnupg
+gpg --no-default-keyring --keyring /usr/share/keyrings/raspbian.gpg --keyserver keyserver.ubuntu.com --recv-keys 9165938D90FDDD2E
+echo "deb [signed-by=/usr/share/keyrings/raspbian.gpg] http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi" | tee /etc/apt/sources.list.d/raspi.list
+
+# add coral repo
+wget --quiet -O /usr/share/keyrings/google-edgetpu.gpg https://packages.cloud.google.com/apt/doc/apt-key.gpg
+echo "deb [signed-by=/usr/share/keyrings/google-edgetpu.gpg] https://packages.cloud.google.com/apt coral-edgetpu-stable main" | tee /etc/apt/sources.list.d/coral-edgetpu.list
+echo "libedgetpu1-max libedgetpu/accepted-eula select true" | debconf-set-selections
+
+# enable non-free repo
+sed -i -e's/ main/ main contrib non-free/g' /etc/apt/sources.list
+
+# coral drivers
+apt-get -qq update
+apt-get -qq install --no-install-recommends --no-install-suggests -y \
+    libedgetpu1-max python3-tflite-runtime python3-pycoral
+
+# btbn-ffmpeg -> amd64 / arm64
+if [[ "${TARGETARCH}" == "amd64" || "${TARGETARCH}" == "arm64" ]]; then
+    if [[ "${TARGETARCH}" == "amd64" ]]; then
+        btbn_arch="64"
+    else
+        btbn_arch="arm64"
+    fi
+    mkdir -p /usr/lib/btbn-ffmpeg
+    wget -qO btbn-ffmpeg.tar.xz "https://github.com/BtbN/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux${btbn_arch}-gpl-5.1.tar.xz"
+    tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
+    rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
+fi
+
+# ffmpeg -> arm32
+if [[ "${TARGETARCH}" == "arm" ]]; then
+    apt-get -qq install --no-install-recommends --no-install-suggests -y ffmpeg
+fi
+
+# arch specific packages
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    # Use debian testing repo only for hwaccel packages
+    echo 'deb http://deb.debian.org/debian testing main non-free' >/etc/apt/sources.list.d/debian-testing.list
+    apt-get -qq update
+    # intel-opencl-icd specifically for GPU support in OpenVino
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        intel-opencl-icd \
+        mesa-va-drivers libva-drm2 intel-media-va-driver-non-free i965-va-driver libmfx1 radeontop intel-gpu-tools
+    rm -f /etc/apt/sources.list.d/debian-testing.list
+fi
+
+if [[ "${TARGETARCH}" == "arm64" ]]; then
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        libva-drm2 mesa-va-drivers
+fi
+
+# not sure why 32bit arm requires all these
+if [[ "${TARGETARCH}" == "arm" ]]; then
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        libgtk-3-dev \
+        libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
+        libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
+        gfortran openexr libatlas-base-dev libtbb-dev libdc1394-22-dev libopenexr-dev \
+        libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev
+fi
+
+apt-get purge gnupg apt-transport-https wget xz-utils -y
+apt-get clean autoclean -y
+apt-get autoremove --purge -y
+rm -rf /var/lib/apt/lists/*

docker/install_s6_overlay.sh

@@ -2,10 +2,12 @@
 
 set -euxo pipefail
 
-s6_version="3.2.1.0"
+s6_version="3.1.2.1"
 
 if [[ "${TARGETARCH}" == "amd64" ]]; then
     s6_arch="x86_64"
+elif [[ "${TARGETARCH}" == "arm" ]]; then
+    s6_arch="armhf"
 elif [[ "${TARGETARCH}" == "arm64" ]]; then
     s6_arch="aarch64"
 fi

docker/main/Dockerfile

@@ -1,340 +0,0 @@
-# syntax=docker/dockerfile:1.6
-
-# https://askubuntu.com/questions/972516/debian-frontend-environment-variable
-ARG DEBIAN_FRONTEND=noninteractive
-
-# Globally set pip break-system-packages option to avoid having to specify it every time
-ARG PIP_BREAK_SYSTEM_PACKAGES=1
-
-ARG BASE_IMAGE=debian:12
-ARG SLIM_BASE=debian:12-slim
-
-# A hook that allows us to inject commands right after the base images
-ARG BASE_HOOK=
-
-FROM ${BASE_IMAGE} AS base
-ARG PIP_BREAK_SYSTEM_PACKAGES
-ARG BASE_HOOK
-
-RUN sh -c "$BASE_HOOK"
-
-FROM --platform=${BUILDPLATFORM} debian:12 AS base_host
-ARG PIP_BREAK_SYSTEM_PACKAGES
-
-FROM ${SLIM_BASE} AS slim-base
-ARG PIP_BREAK_SYSTEM_PACKAGES
-ARG BASE_HOOK
-
-RUN sh -c "$BASE_HOOK"
-
-FROM slim-base AS wget
-ARG DEBIAN_FRONTEND
-RUN apt-get update \
-    && apt-get install -y wget xz-utils \
-    && rm -rf /var/lib/apt/lists/*
-WORKDIR /rootfs
-
-FROM base AS nginx
-ARG DEBIAN_FRONTEND
-ENV CCACHE_DIR /root/.ccache
-ENV CCACHE_MAXSIZE 2G
-
-RUN --mount=type=bind,source=docker/main/build_nginx.sh,target=/deps/build_nginx.sh \
-    /deps/build_nginx.sh
-
-FROM wget AS sqlite-vec
-ARG DEBIAN_FRONTEND
-
-# Build sqlite_vec from source
-COPY docker/main/build_sqlite_vec.sh /deps/build_sqlite_vec.sh
-RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
-    --mount=type=bind,source=docker/main/build_sqlite_vec.sh,target=/deps/build_sqlite_vec.sh \
-    --mount=type=cache,target=/root/.ccache \
-    /deps/build_sqlite_vec.sh
-
-FROM scratch AS go2rtc
-ARG TARGETARCH
-WORKDIR /rootfs/usr/local/go2rtc/bin
-ADD --link --chmod=755 "https://github.com/AlexxIT/go2rtc/releases/download/v1.9.10/go2rtc_linux_${TARGETARCH}" go2rtc
-
-FROM wget AS tempio
-ARG TARGETARCH
-RUN --mount=type=bind,source=docker/main/install_tempio.sh,target=/deps/install_tempio.sh \
-    /deps/install_tempio.sh
-
-####
-#
-# OpenVino Support
-#
-# 1. Download and convert a model from Intel's Public Open Model Zoo
-#
-####
-# Download and Convert OpenVino model
-FROM base_host AS ov-converter
-ARG DEBIAN_FRONTEND
-
-# Install OpenVino Runtime and Dev library
-COPY docker/main/requirements-ov.txt /requirements-ov.txt
-RUN apt-get -qq update \
-    && apt-get -qq install -y wget python3 python3-dev python3-distutils gcc pkg-config libhdf5-dev \
-    && wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip" \
-    && pip3 install -r /requirements-ov.txt
-
-# Get OpenVino Model
-RUN --mount=type=bind,source=docker/main/build_ov_model.py,target=/build_ov_model.py \
-    mkdir /models && cd /models \
-    && wget http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
-    && tar -xvf ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
-    && python3 /build_ov_model.py
-
-####
-#
-# Coral Compatibility
-#
-# Builds libusb without udev. Needed for synology and other devices with USB coral
-####
-# libUSB - No Udev
-FROM wget as libusb-build
-ARG TARGETARCH
-ARG DEBIAN_FRONTEND
-ENV CCACHE_DIR /root/.ccache
-ENV CCACHE_MAXSIZE 2G
-
-# Build libUSB without udev.  Needed for Openvino NCS2 support
-WORKDIR /opt
-RUN apt-get update && apt-get install -y unzip build-essential automake libtool ccache pkg-config
-RUN --mount=type=cache,target=/root/.ccache wget -q https://github.com/libusb/libusb/archive/v1.0.26.zip -O v1.0.26.zip && \
-    unzip v1.0.26.zip && cd libusb-1.0.26 && \
-    ./bootstrap.sh && \
-    ./configure CC='ccache gcc' CCX='ccache g++' --disable-udev --enable-shared && \
-    make -j $(nproc --all)
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends libusb-1.0-0-dev && \
-    rm -rf /var/lib/apt/lists/*
-WORKDIR /opt/libusb-1.0.26/libusb
-RUN /bin/mkdir -p '/usr/local/lib' && \
-    /bin/bash ../libtool  --mode=install /usr/bin/install -c libusb-1.0.la '/usr/local/lib' && \
-    /bin/mkdir -p '/usr/local/include/libusb-1.0' && \
-    /usr/bin/install -c -m 644 libusb.h '/usr/local/include/libusb-1.0' && \
-    /bin/mkdir -p '/usr/local/lib/pkgconfig' && \
-    cd  /opt/libusb-1.0.26/ && \
-    /usr/bin/install -c -m 644 libusb-1.0.pc '/usr/local/lib/pkgconfig' && \
-    ldconfig
-
-FROM wget AS models
-
-# Get model and labels
-RUN wget -qO edgetpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite
-RUN wget -qO cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
-COPY labelmap.txt .
-# Copy OpenVino model
-COPY --from=ov-converter /models/ssdlite_mobilenet_v2.xml openvino-model/
-COPY --from=ov-converter /models/ssdlite_mobilenet_v2.bin openvino-model/
-RUN wget -q https://github.com/openvinotoolkit/open_model_zoo/raw/master/data/dataset_classes/coco_91cl_bkgr.txt -O openvino-model/coco_91cl_bkgr.txt && \
-    sed -i 's/truck/car/g' openvino-model/coco_91cl_bkgr.txt
-# Get Audio Model and labels
-RUN wget -qO - https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download | tar xvz && mv 1.tflite cpu_audio_model.tflite
-COPY audio-labelmap.txt .
-
-
-FROM wget AS s6-overlay
-ARG TARGETARCH
-RUN --mount=type=bind,source=docker/main/install_s6_overlay.sh,target=/deps/install_s6_overlay.sh \
-    /deps/install_s6_overlay.sh
-
-
-FROM base AS wheels
-ARG DEBIAN_FRONTEND
-ARG TARGETARCH
-ARG DEBUG=false
-
-# Use a separate container to build wheels to prevent build dependencies in final image
-RUN apt-get -qq update \
-    && apt-get -qq install -y \
-    apt-transport-https wget unzip \
-    && apt-get -qq update \
-    && apt-get -qq install -y \
-    python3.11 \
-    python3.11-dev \
-    # opencv dependencies
-    build-essential cmake git pkg-config libgtk-3-dev \
-    libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
-    libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
-    gfortran openexr libatlas-base-dev libssl-dev\
-    libtbbmalloc2 libtbb-dev libdc1394-dev libopenexr-dev \
-    libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
-    # sqlite3 dependencies
-    tclsh \
-    # scipy dependencies
-    gcc gfortran libopenblas-dev liblapack-dev && \
-    rm -rf /var/lib/apt/lists/*
-
-RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
-
-RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip"
-
-COPY docker/main/requirements.txt /requirements.txt
-COPY docker/main/requirements-dev.txt /requirements-dev.txt
-
-RUN pip3 install -r /requirements.txt
-
-# Build pysqlite3 from source
-COPY docker/main/build_pysqlite3.sh /build_pysqlite3.sh
-RUN /build_pysqlite3.sh
-
-COPY docker/main/requirements-wheels.txt /requirements-wheels.txt
-RUN pip3 wheel --wheel-dir=/wheels -r /requirements-wheels.txt && \
-    if [ "$DEBUG" = "true" ]; then \
-        pip3 wheel --wheel-dir=/wheels -r /requirements-dev.txt; \
-    fi
-
-# Install HailoRT & Wheels
-RUN --mount=type=bind,source=docker/main/install_hailort.sh,target=/deps/install_hailort.sh \
-    /deps/install_hailort.sh
-
-# Collect deps in a single layer
-FROM scratch AS deps-rootfs
-COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
-COPY --from=sqlite-vec /usr/local/lib/ /usr/local/lib/
-COPY --from=go2rtc /rootfs/ /
-COPY --from=libusb-build /usr/local/lib /usr/local/lib
-COPY --from=tempio /rootfs/ /
-COPY --from=s6-overlay /rootfs/ /
-COPY --from=models /rootfs/ /
-COPY --from=wheels /rootfs/ /
-COPY docker/main/rootfs/ /
-
-
-# Frigate deps (ffmpeg, python, nginx, go2rtc, s6-overlay, etc)
-FROM slim-base AS deps
-ARG TARGETARCH
-ARG BASE_IMAGE
-
-ARG DEBIAN_FRONTEND
-# http://stackoverflow.com/questions/48162574/ddg#49462622
-ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
-
-# https://github.com/NVIDIA/nvidia-docker/wiki/Installation-(Native-GPU-Support)
-ENV NVIDIA_VISIBLE_DEVICES=all
-ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
-
-# Disable tokenizer parallelism warning
-# https://stackoverflow.com/questions/62691279/how-to-disable-tokenizers-parallelism-true-false-warning/72926996#72926996
-ENV TOKENIZERS_PARALLELISM=true
-# https://github.com/huggingface/transformers/issues/27214
-ENV TRANSFORMERS_NO_ADVISORY_WARNINGS=1
-
-# Set OpenCV ffmpeg loglevel to fatal: https://ffmpeg.org/doxygen/trunk/log_8h.html
-ENV OPENCV_FFMPEG_LOGLEVEL=8
-
-# Set NumPy to ignore getlimits warning
-ENV PYTHONWARNINGS="ignore:::numpy.core.getlimits"
-
-# Set HailoRT to disable logging
-ENV HAILORT_LOGGER_PATH=NONE
-
-# TensorFlow error only
-ENV TF_CPP_MIN_LOG_LEVEL=3
-
-ENV PATH="/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
-
-# Install dependencies
-RUN --mount=type=bind,source=docker/main/install_deps.sh,target=/deps/install_deps.sh \
-    /deps/install_deps.sh
-
-ENV DEFAULT_FFMPEG_VERSION="7.0"
-ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:5.0"
-
-RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip"
-
-RUN --mount=type=bind,from=wheels,source=/wheels,target=/deps/wheels \
-    pip3 install -U /deps/wheels/*.whl
-
-# Install MemryX runtime (requires libgomp (OpenMP) in the final docker image)
-RUN --mount=type=bind,source=docker/main/install_memryx.sh,target=/deps/install_memryx.sh \
-    bash -c "bash /deps/install_memryx.sh"
-
-COPY --from=deps-rootfs / /
-
-RUN ldconfig
-
-EXPOSE 5000
-EXPOSE 8554
-EXPOSE 8555/tcp 8555/udp
-
-# Configure logging to prepend timestamps, log to stdout, keep 0 archives and rotate on 10MB
-ENV S6_LOGGING_SCRIPT="T 1 n0 s10000000 T"
-# Do not fail on long-running download scripts
-ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
-
-ENTRYPOINT ["/init"]
-CMD []
-
-HEALTHCHECK --start-period=300s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
-    CMD test -f /dev/shm/.frigate-is-stopping && exit 0; curl --fail --silent --show-error http://127.0.0.1:5000/api/version || exit 1
-
-# Frigate deps with Node.js and NPM for devcontainer
-FROM deps AS devcontainer
-
-# Do not start the actual Frigate service on devcontainer as it will be started by VS Code
-# But start a fake service for simulating the logs
-COPY docker/main/fake_frigate_run /etc/s6-overlay/s6-rc.d/frigate/run
-
-# Create symbolic link to the frigate source code, as go2rtc's create_config.sh uses it
-RUN mkdir -p /opt/frigate \
-    && ln -svf /workspace/frigate/frigate /opt/frigate/frigate
-
-# Install Node 20
-RUN curl -SLO https://deb.nodesource.com/nsolid_setup_deb.sh && \
-    chmod 500 nsolid_setup_deb.sh && \
-    ./nsolid_setup_deb.sh 20 && \
-    apt-get install nodejs -y \
-    && rm -rf /var/lib/apt/lists/* \
-    && npm install -g npm@10
-
-WORKDIR /workspace/frigate
-
-RUN apt-get update \
-    && apt-get install make -y \
-    && rm -rf /var/lib/apt/lists/*
-
-RUN --mount=type=bind,source=./docker/main/requirements-dev.txt,target=/workspace/frigate/requirements-dev.txt \
-    pip3 install -r requirements-dev.txt
-
-HEALTHCHECK NONE
-
-CMD ["sleep", "infinity"]
-
-
-# Frigate web build
-# This should be architecture agnostic, so speed up the build on multiarch by not using QEMU.
-FROM --platform=$BUILDPLATFORM node:20 AS web-build
-
-WORKDIR /work
-COPY web/package.json web/package-lock.json ./
-RUN npm install
-
-COPY web/ ./
-RUN npm run build \
-    && mv dist/BASE_PATH/monacoeditorwork/* dist/assets/ \
-    && rm -rf dist/BASE_PATH
-
-# Collect final files in a single layer
-FROM scratch AS rootfs
-
-WORKDIR /opt/frigate/
-COPY frigate frigate/
-COPY migrations migrations/
-COPY --from=web-build /work/dist/ web/
-
-# Frigate final container
-FROM deps AS frigate
-
-WORKDIR /opt/frigate/
-COPY --from=rootfs / /

docker/main/build_nginx.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-NGINX_VERSION="1.27.4"
-VOD_MODULE_VERSION="1.31"
-SECURE_TOKEN_MODULE_VERSION="1.5"
-SET_MISC_MODULE_VERSION="v0.33"
-NGX_DEVEL_KIT_VERSION="v0.3.3"
-
-source /etc/os-release
-
-if [[ "$VERSION_ID" == "12" ]]; then
-    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
-else
-    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
-    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
-fi
-
-apt-get update
-apt-get -yqq build-dep nginx
-
-apt-get -yqq install --no-install-recommends ca-certificates wget
-update-ca-certificates -f
-apt install -y ccache
-
-export PATH="/usr/lib/ccache:$PATH"
-
-mkdir /tmp/nginx
-wget -nv https://nginx.org/download/nginx-${NGINX_VERSION}.tar.gz
-tar -zxf nginx-${NGINX_VERSION}.tar.gz -C /tmp/nginx --strip-components=1
-rm nginx-${NGINX_VERSION}.tar.gz
-mkdir /tmp/nginx-vod-module
-wget -nv https://github.com/kaltura/nginx-vod-module/archive/refs/tags/${VOD_MODULE_VERSION}.tar.gz
-tar -zxf ${VOD_MODULE_VERSION}.tar.gz -C /tmp/nginx-vod-module --strip-components=1
-rm ${VOD_MODULE_VERSION}.tar.gz
-    # Patch MAX_CLIPS to allow more clips to be added than the default 128
-sed -i 's/MAX_CLIPS (128)/MAX_CLIPS (1080)/g' /tmp/nginx-vod-module/vod/media_set.h
-patch -d /tmp/nginx-vod-module/ -p1 << 'EOF'
---- a/vod/avc_hevc_parser.c       2022-06-27 11:38:10.000000000 +0000
-+++ b/vod/avc_hevc_parser.c       2023-01-16 11:25:10.900521298 +0000
-@@ -3,6 +3,9 @@
- bool_t
- avc_hevc_parser_rbsp_trailing_bits(bit_reader_state_t* reader)
- {
-+	// https://github.com/blakeblackshear/frigate/issues/4572
-+	return TRUE;
-+
- 	uint32_t one_bit;
-
- 	if (reader->stream.eof_reached)
-EOF
-
-
-mkdir /tmp/nginx-secure-token-module
-wget https://github.com/kaltura/nginx-secure-token-module/archive/refs/tags/${SECURE_TOKEN_MODULE_VERSION}.tar.gz
-tar -zxf ${SECURE_TOKEN_MODULE_VERSION}.tar.gz -C /tmp/nginx-secure-token-module --strip-components=1
-rm ${SECURE_TOKEN_MODULE_VERSION}.tar.gz
-
-mkdir /tmp/ngx_devel_kit
-wget https://github.com/vision5/ngx_devel_kit/archive/refs/tags/${NGX_DEVEL_KIT_VERSION}.tar.gz
-tar -zxf ${NGX_DEVEL_KIT_VERSION}.tar.gz -C /tmp/ngx_devel_kit --strip-components=1
-rm ${NGX_DEVEL_KIT_VERSION}.tar.gz
-
-mkdir /tmp/nginx-set-misc-module
-wget https://github.com/openresty/set-misc-nginx-module/archive/refs/tags/${SET_MISC_MODULE_VERSION}.tar.gz
-tar -zxf ${SET_MISC_MODULE_VERSION}.tar.gz -C /tmp/nginx-set-misc-module --strip-components=1
-rm ${SET_MISC_MODULE_VERSION}.tar.gz
-
-cd /tmp/nginx
-
-./configure --prefix=/usr/local/nginx \
-    --with-file-aio \
-    --with-http_sub_module \
-    --with-http_ssl_module \
-    --with-http_auth_request_module \
-    --with-http_realip_module \
-    --with-threads \
-    --add-module=../ngx_devel_kit \
-    --add-module=../nginx-set-misc-module \
-    --add-module=../nginx-vod-module \
-    --add-module=../nginx-secure-token-module \
-    --with-cc-opt="-O3 -Wno-error=implicit-fallthrough"
-
-make CC="ccache gcc" -j$(nproc) && make install
-rm -rf /usr/local/nginx/html /usr/local/nginx/conf/*.default

docker/main/build_ov_model.py

@@ -1,11 +0,0 @@
-import openvino as ov
-from openvino.tools import mo
-
-ov_model = mo.convert_model(
-    "/models/ssdlite_mobilenet_v2_coco_2018_05_09/frozen_inference_graph.pb",
-    compress_to_fp16=True,
-    transformations_config="/usr/local/lib/python3.11/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
-    tensorflow_object_detection_api_pipeline_config="/models/ssdlite_mobilenet_v2_coco_2018_05_09/pipeline.config",
-    reverse_input_channels=True,
-)
-ov.save_model(ov_model, "/models/ssdlite_mobilenet_v2.xml")

docker/main/build_pysqlite3.sh

@@ -1,48 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-SQLITE3_VERSION="3.46.1"
-PYSQLITE3_VERSION="0.5.3"
-
-# Install libsqlite3-dev if not present (needed for some base images like NVIDIA TensorRT)
-if ! dpkg -l | grep -q libsqlite3-dev; then
-  echo "Installing libsqlite3-dev for compilation..."
-  apt-get update && apt-get install -y libsqlite3-dev && rm -rf /var/lib/apt/lists/*
-fi
-
-# Fetch the pre-built sqlite amalgamation instead of building from source
-if [[ ! -d "sqlite" ]]; then
-  mkdir sqlite
-  cd sqlite
-
-  # Download the pre-built amalgamation from sqlite.org
-  # For SQLite 3.46.1, the amalgamation version is 3460100
-  SQLITE_AMALGAMATION_VERSION="3460100"
-
-  wget https://www.sqlite.org/2024/sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}.zip -O sqlite-amalgamation.zip
-  unzip sqlite-amalgamation.zip
-  mv sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}/* .
-  rmdir sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}
-  rm sqlite-amalgamation.zip
-
-  cd ../
-fi
-
-# Grab the pysqlite3 source code.
-if [[ ! -d "./pysqlite3" ]]; then
-  git clone https://github.com/coleifer/pysqlite3.git
-fi
-
-cd pysqlite3/
-git checkout ${PYSQLITE3_VERSION}
-
-# Copy the sqlite3 source amalgamation into the pysqlite3 directory so we can
-# create a self-contained extension module.
-cp "../sqlite/sqlite3.c" ./
-cp "../sqlite/sqlite3.h" ./
-
-# Create the wheel and put it in the /wheels dir.
-sed -i "s|name='pysqlite3-binary'|name=PACKAGE_NAME|g" setup.py
-python3 setup.py build_static
-pip3 wheel . -w /wheels

docker/main/build_sqlite_vec.sh

@@ -1,38 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-SQLITE_VEC_VERSION="0.1.3"
-
-source /etc/os-release
-
-if [[ "$VERSION_ID" == "12" ]]; then
-    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
-else
-    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
-    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
-fi
-
-apt-get update
-apt-get -yqq build-dep sqlite3 gettext git
-
-mkdir /tmp/sqlite_vec
-# Grab the sqlite_vec source code.
-wget -nv https://github.com/asg017/sqlite-vec/archive/refs/tags/v${SQLITE_VEC_VERSION}.tar.gz
-tar -zxf v${SQLITE_VEC_VERSION}.tar.gz -C /tmp/sqlite_vec
-
-cd /tmp/sqlite_vec/sqlite-vec-${SQLITE_VEC_VERSION}
-
-mkdir -p vendor
-wget -O sqlite-amalgamation.zip https://www.sqlite.org/2024/sqlite-amalgamation-3450300.zip
-unzip sqlite-amalgamation.zip
-mv sqlite-amalgamation-3450300/* vendor/
-rmdir sqlite-amalgamation-3450300
-rm sqlite-amalgamation.zip
-
-# build loadable module
-make loadable
-
-# install it
-cp dist/vec0.* /usr/local/lib
-

docker/main/fake_frigate_run

@@ -1,13 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the fake Frigate service
-
-set -o errexit -o nounset -o pipefail
-
-# Tell S6-Overlay not to restart this service
-s6-svc -O .
-
-while true; do
-  echo "[INFO] The fake Frigate service is running..."
-  sleep 5s
-done

docker/main/install_deps.sh

@@ -1,150 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-apt-get -qq update
-
-apt-get -qq install --no-install-recommends -y \
-    apt-transport-https \
-    ca-certificates \
-    gnupg \
-    wget \
-    lbzip2 \
-    procps vainfo \
-    unzip locales tzdata libxml2 xz-utils \
-    python3.11 \
-    curl \
-    lsof \
-    jq \
-    nethogs \
-    libgl1 \
-    libglib2.0-0 \
-    libusb-1.0.0 \
-    python3-h2 \
-    libgomp1  # memryx detector
-
-update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
-
-mkdir -p -m 600 /root/.gnupg
-
-# install coral runtime
-wget -q -O /tmp/libedgetpu1-max.deb "https://github.com/feranick/libedgetpu/releases/download/16.0TF2.17.1-1/libedgetpu1-max_16.0tf2.17.1-1.bookworm_${TARGETARCH}.deb"
-unset DEBIAN_FRONTEND
-yes | dpkg -i /tmp/libedgetpu1-max.deb && export DEBIAN_FRONTEND=noninteractive
-rm /tmp/libedgetpu1-max.deb
-
-# install mesa-teflon-delegate from bookworm-backports
-# Only available for arm64 at the moment
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    if [[ "${BASE_IMAGE}" == *"nvcr.io/nvidia/tensorrt"* ]]; then
-        echo "Info: Skipping apt-get commands because BASE_IMAGE includes 'nvcr.io/nvidia/tensorrt' for arm64."
-    else
-        echo "deb http://deb.debian.org/debian bookworm-backports main" | tee /etc/apt/sources.list.d/bookworm-backbacks.list
-        apt-get -qq update
-        apt-get -qq install --no-install-recommends --no-install-suggests -y mesa-teflon-delegate/bookworm-backports
-    fi
-fi
-
-# ffmpeg -> amd64
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    mkdir -p /usr/lib/ffmpeg/5.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
-    rm -rf ffmpeg.tar.xz
-    mkdir -p /usr/lib/ffmpeg/7.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linux64-gpl-7.0.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
-    rm -rf ffmpeg.tar.xz
-fi
-
-# ffmpeg -> arm64
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    mkdir -p /usr/lib/ffmpeg/5.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
-    rm -f ffmpeg.tar.xz
-    mkdir -p /usr/lib/ffmpeg/7.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linuxarm64-gpl-7.0.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
-    rm -f ffmpeg.tar.xz
-fi
-
-# arch specific packages
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-  # Install non-free version of i965 driver
-  sed -i -E "/^Components: main$/s/main/main contrib non-free non-free-firmware/" "/etc/apt/sources.list.d/debian.sources" \
-      && apt-get -qq update \
-      && apt-get install --no-install-recommends --no-install-suggests -y i965-va-driver-shaders \
-      && sed -i -E "/^Components: main contrib non-free non-free-firmware$/s/main contrib non-free non-free-firmware/main/" "/etc/apt/sources.list.d/debian.sources" \
-      && apt-get update
-
-    # install amd / intel-i965 driver packages
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        intel-gpu-tools onevpl-tools \
-        libva-drm2 \
-        mesa-va-drivers radeontop
-
-    # intel packages use zst compression so we need to update dpkg
-    apt-get install -y dpkg
-
-    # use intel apt intel packages
-    wget -qO - https://repositories.intel.com/gpu/intel-graphics.key | gpg --yes --dearmor --output /usr/share/keyrings/intel-graphics.gpg
-    echo "deb [arch=amd64 signed-by=/usr/share/keyrings/intel-graphics.gpg] https://repositories.intel.com/gpu/ubuntu jammy client" | tee /etc/apt/sources.list.d/intel-gpu-jammy.list
-    apt-get -qq update
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        intel-media-va-driver-non-free libmfx1 libmfxgen1 libvpl2
-
-    apt-get -qq install -y ocl-icd-libopencl1
-
-    # install libtbb12 for NPU support
-    apt-get -qq install -y libtbb12
-
-    rm -f /usr/share/keyrings/intel-graphics.gpg
-    rm -f /etc/apt/sources.list.d/intel-gpu-jammy.list
-
-    # install legacy and standard intel icd and level-zero-gpu
-    # see https://github.com/intel/compute-runtime/blob/master/LEGACY_PLATFORMS.md for more info
-    # needed core package
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/libigdgmm12_22.5.5_amd64.deb
-    dpkg -i libigdgmm12_22.5.5_amd64.deb
-    rm libigdgmm12_22.5.5_amd64.deb
-
-    # legacy packages
-    wget https://github.com/intel/compute-runtime/releases/download/24.35.30872.36/intel-opencl-icd-legacy1_24.35.30872.36_amd64.deb
-    wget https://github.com/intel/compute-runtime/releases/download/24.35.30872.36/intel-level-zero-gpu-legacy1_1.5.30872.36_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/igc-1.0.17537.24/intel-igc-opencl_1.0.17537.24_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/igc-1.0.17537.24/intel-igc-core_1.0.17537.24_amd64.deb
-    # standard packages
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/intel-opencl-icd_24.52.32224.5_amd64.deb
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/intel-level-zero-gpu_1.6.32224.5_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/v2.5.6/intel-igc-opencl-2_2.5.6+18417_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/v2.5.6/intel-igc-core-2_2.5.6+18417_amd64.deb
-    # npu packages
-    wget https://github.com/oneapi-src/level-zero/releases/download/v1.21.9/level-zero_1.21.9+u22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-driver-compiler-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-fw-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-level-zero-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-
-    dpkg -i *.deb
-    rm *.deb
-fi
-
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        libva-drm2 mesa-va-drivers radeontop
-fi
-
-# install vulkan
-apt-get -qq install --no-install-recommends --no-install-suggests -y \
-    libvulkan1 mesa-vulkan-drivers
-
-apt-get purge gnupg apt-transport-https xz-utils -y
-apt-get clean autoclean -y
-apt-get autoremove --purge -y
-rm -rf /var/lib/apt/lists/*
-
-# Install yq, for frigate-prepare and go2rtc echo source
-curl -fsSL \
-    "https://github.com/mikefarah/yq/releases/download/v4.48.2/yq_linux_$(dpkg --print-architecture)" \
-    --output /usr/local/bin/yq
-chmod +x /usr/local/bin/yq

docker/main/install_hailort.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-hailo_version="4.21.0"
-
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    arch="x86_64"
-elif [[ "${TARGETARCH}" == "arm64" ]]; then
-    arch="aarch64"
-fi
-
-wget -qO- "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-debian12-${TARGETARCH}.tar.gz" | tar -C / -xzf -
-wget -P /wheels/ "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-${hailo_version}-cp311-cp311-linux_${arch}.whl"

docker/main/install_memryx.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-set -e
-
-# Download the MxAccl for Frigate github release
-wget https://github.com/memryx/mx_accl_frigate/archive/refs/tags/v2.1.0.zip -O /tmp/mxaccl.zip
-unzip /tmp/mxaccl.zip -d /tmp
-mv /tmp/mx_accl_frigate-2.1.0 /opt/mx_accl_frigate
-rm /tmp/mxaccl.zip
-
-# Install Python dependencies
-pip3 install -r /opt/mx_accl_frigate/freeze
-
-# Link the Python package dynamically
-SITE_PACKAGES=$(python3 -c "import site; print(site.getsitepackages()[0])")
-ln -s /opt/mx_accl_frigate/memryx "$SITE_PACKAGES/memryx"
-
-# Copy architecture-specific shared libraries
-ARCH=$(uname -m)
-if [[ "$ARCH" == "x86_64" ]]; then
-    cp /opt/mx_accl_frigate/memryx/x86/libmemx.so* /usr/lib/x86_64-linux-gnu/
-    cp /opt/mx_accl_frigate/memryx/x86/libmx_accl.so* /usr/lib/x86_64-linux-gnu/
-elif [[ "$ARCH" == "aarch64" ]]; then
-    cp /opt/mx_accl_frigate/memryx/arm/libmemx.so* /usr/lib/aarch64-linux-gnu/
-    cp /opt/mx_accl_frigate/memryx/arm/libmx_accl.so* /usr/lib/aarch64-linux-gnu/
-else
-    echo "Unsupported architecture: $ARCH"
-    exit 1
-fi
-
-# Refresh linker cache
-ldconfig

docker/main/install_tempio.sh

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-tempio_version="2021.09.0"
-
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    arch="amd64"
-elif [[ "${TARGETARCH}" == "arm64" ]]; then
-    arch="aarch64"
-fi
-
-mkdir -p /rootfs/usr/local/tempio/bin
-
-wget -q -O /rootfs/usr/local/tempio/bin/tempio "https://github.com/home-assistant/tempio/releases/download/${tempio_version}/tempio_${arch}"
-chmod 755 /rootfs/usr/local/tempio/bin/tempio

docker/main/requirements-dev.txt

@@ -1,4 +0,0 @@
-ruff
-
-# types
-types-peewee == 3.17.*

docker/main/requirements-ov.txt

@@ -1,3 +0,0 @@
-numpy
-tensorflow
-openvino-dev>=2024.0.0

docker/main/requirements-wheels.txt

@@ -1,85 +0,0 @@
-aiofiles == 24.1.*
-click == 8.1.*
-# FastAPI
-aiohttp == 3.12.*
-starlette == 0.47.*
-starlette-context == 0.4.*
-fastapi[standard-no-fastapi-cloud-cli] == 0.116.*
-uvicorn == 0.35.*
-slowapi == 0.1.*
-joserfc == 1.2.*
-cryptography == 44.0.*
-pathvalidate == 3.3.*
-markupsafe == 3.0.*
-python-multipart == 0.0.20
-# Classification Model Training
-tensorflow == 2.19.* ; platform_machine == 'aarch64'
-tensorflow-cpu == 2.19.* ; platform_machine == 'x86_64'
-# General
-mypy == 1.6.1
-onvif-zeep-async == 4.0.*
-paho-mqtt == 2.1.*
-pandas == 2.2.*
-peewee == 3.17.*
-peewee_migrate == 1.13.*
-psutil == 7.1.*
-pydantic == 2.10.*
-git+https://github.com/fbcotter/py3nvml#egg=py3nvml
-pytz == 2025.*
-pyzmq == 26.2.*
-ruamel.yaml == 0.18.*
-tzlocal == 5.2
-requests == 2.32.*
-types-requests == 2.32.*
-norfair == 2.3.*
-setproctitle == 1.3.*
-ws4py == 0.5.*
-unidecode == 1.3.*
-titlecase == 2.4.*
-# Image Manipulation
-numpy == 1.26.*
-opencv-python-headless == 4.11.0.*
-opencv-contrib-python == 4.11.0.*
-scipy == 1.16.*
-# OpenVino & ONNX
-openvino == 2025.3.*
-onnxruntime == 1.22.*
-# Embeddings
-transformers == 4.45.*
-# Generative AI
-google-generativeai == 0.8.*
-ollama == 0.5.*
-openai == 1.65.*
-# push notifications
-py-vapid == 1.9.*
-pywebpush == 2.0.*
-# alpr
-pyclipper == 1.3.*
-shapely == 2.0.*
-rapidfuzz==3.12.*
-# HailoRT Wheels
-appdirs==1.4.*
-argcomplete==2.0.*
-contextlib2==0.6.*
-distlib==0.3.*
-filelock==3.8.*
-future==0.18.*
-importlib-metadata==5.1.*
-importlib-resources==5.1.*
-netaddr==0.8.*
-netifaces==0.10.*
-verboselogs==1.7.*
-virtualenv==20.17.*
-prometheus-client == 0.21.*
-# TFLite
-tflite_runtime @ https://github.com/frigate-nvr/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_x86_64.whl; platform_machine == 'x86_64'
-tflite_runtime @ https://github.com/feranick/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_aarch64.whl; platform_machine == 'aarch64'
-# audio transcription
-sherpa-onnx==1.12.*
-faster-whisper==1.1.*
-librosa==0.11.*
-soundfile==0.13.*
-# DeGirum detector
-degirum == 0.16.*
-# Memory profiling
-memray == 1.15.*

docker/main/requirements.txt

@@ -1 +0,0 @@
-scikit-build == 0.18.*

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/consumer-for

@@ -1 +0,0 @@
-certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/pipeline-name

@@ -1 +0,0 @@
-certsync-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/finish

@@ -1,30 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Take down the S6 supervision tree when the service fails
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-declare exit_code_container
-exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
-readonly exit_code_container
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="CERTSYNC"
-
-echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
-  fi
-  if [[ "${exit_code_signal}" -eq 15 ]]; then
-    exec /run/s6/basedir/bin/halt
-  fi
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
-  fi
-  exec /run/s6/basedir/bin/halt
-fi

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/producer-for

@@ -1 +0,0 @@
-certsync-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/run

@@ -1,58 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the CERTSYNC service
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-echo "[INFO] Starting certsync..."
-
-lefile="/etc/letsencrypt/live/frigate/fullchain.pem"
-
-tls_enabled=`python3 /usr/local/nginx/get_listen_settings.py | jq -r .tls.enabled`
-
-while true
-do
-    if [[ "$tls_enabled" == 'false' ]]; then
-        sleep 9999
-        continue
-    fi
-
-    if [ ! -e $lefile ]
-    then
-        echo "[ERROR] TLS certificate does not exist: $lefile"
-    fi
-
-    leprint=`openssl x509 -in $lefile -fingerprint -noout 2>&1 || echo 'failed'`
-
-    case "$leprint" in
-        *Fingerprint*)
-            ;;
-        *)
-            echo "[ERROR] Missing fingerprint from $lefile"
-            ;;
-    esac
-
-    liveprint=`echo | openssl s_client -showcerts -connect 127.0.0.1:8971 2>&1 | openssl x509 -fingerprint 2>&1 | grep -i fingerprint  || echo 'failed'`
-
-    case "$liveprint" in
-        *Fingerprint*)
-            ;;
-        *)
-            echo "[ERROR] Missing fingerprint from current nginx TLS cert"
-            ;;
-    esac
-
-    if [[ "$leprint" != "failed" && "$liveprint" != "failed" && "$leprint" != "$liveprint" ]]
-    then
-        echo "[INFO] Reloading nginx to refresh TLS certificate"
-        echo "$lefile: $leprint"
-        /usr/local/nginx/sbin/nginx -s reload
-    fi
-
-    sleep 60
-
-done
-
-exit 0

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/timeout-kill

@@ -1 +0,0 @@
-30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/consumer-for

@@ -1 +0,0 @@
-frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/pipeline-name

@@ -1 +0,0 @@
-frigate-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/finish

@@ -1,28 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Take down the S6 supervision tree when the service exits
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-declare exit_code_container
-exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
-readonly exit_code_container
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="Frigate"
-
-echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
-  fi
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
-  fi
-fi
-
-exec /run/s6/basedir/bin/halt

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/producer-for

@@ -1 +0,0 @@
-frigate-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/run

@@ -1,33 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the Frigate service
-
-set -o errexit -o nounset -o pipefail
-
-# opt out of openvino telemetry
-if [ -e /usr/local/bin/opt_in_out ]; then
-  /usr/local/bin/opt_in_out --opt_out > /dev/null 2>&1
-fi
-
-# Logs should be sent to stdout so that s6 can collect them
-
-# Tell S6-Overlay not to restart this service
-s6-svc -O .
-
-function set_libva_version() {
-    local ffmpeg_path
-    ffmpeg_path=$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)
-    LIBAVFORMAT_VERSION_MAJOR=$("$ffmpeg_path" -version | grep -Po "libavformat\W+\K\d+")
-    export LIBAVFORMAT_VERSION_MAJOR
-}
-
-echo "[INFO] Preparing Frigate..."
-set_libva_version
-
-echo "[INFO] Starting Frigate..."
-
-cd /opt/frigate || echo "[ERROR] Failed to change working directory to /opt/frigate"
-
-# Replace the bash process with the Frigate process, redirecting stderr to stdout
-exec 2>&1
-exec python3 -u -m frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/timeout-kill

@@ -1 +0,0 @@
-120000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/finish

@@ -1,12 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="go2rtc-healthcheck"
-
-echo "[INFO] The ${service} service exited with code ${exit_code_service} (by signal ${exit_code_signal})"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/producer-for

@@ -1 +0,0 @@
-go2rtc-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/run

@@ -1,22 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the go2rtc-healthcheck service
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-# Give some additional time for go2rtc to start before start pinging
-sleep 10s
-echo "[INFO] Starting go2rtc healthcheck service..."
-
-while sleep 30s; do
-    # Check if the service is running
-    if ! curl --connect-timeout 10 --fail --silent --show-error --output /dev/null http://127.0.0.1:1984/api/streams 2>&1; then
-        echo "[ERROR] The go2rtc service is not responding to ping, restarting..."
-        # We can also use -r instead of -t to send kill signal rather than term
-        s6-svc -t /var/run/service/go2rtc 2>&1
-        # Give some additional time to go2rtc to restart before start pinging again
-        sleep 10s
-    fi
-done

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/timeout-kill

@@ -1 +0,0 @@
-5000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/consumer-for

@@ -1,2 +0,0 @@
-go2rtc
-go2rtc-healthcheck

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/pipeline-name

@@ -1 +0,0 @@
-go2rtc-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/finish

@@ -1,12 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="go2rtc"
-
-echo "[INFO] The ${service} service exited with code ${exit_code_service} (by signal ${exit_code_signal})"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/producer-for

@@ -1 +0,0 @@
-go2rtc-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/run

@@ -1,124 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the go2rtc service
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-function get_ip_and_port_from_supervisor() {
-    local ip_address
-    # Example: 192.168.1.10/24
-    local ip_regex='^([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3})/[0-9]{1,2}$'
-    if ip_address=$(
-        curl -fsSL \
-            -H "Authorization: Bearer ${SUPERVISOR_TOKEN}" \
-            -H "Content-Type: application/json" \
-            http://supervisor/network/interface/default/info |
-            jq --exit-status --raw-output '.data.ipv4.address[0]'
-    ) && [[ "${ip_address}" =~ ${ip_regex} ]]; then
-        ip_address="${BASH_REMATCH[1]}"
-        echo "[INFO] Got IP address from supervisor: ${ip_address}"
-    else
-        echo "[WARN] Failed to get IP address from supervisor"
-        return 0
-    fi
-
-    local webrtc_port
-    local port_regex='^([0-9]{1,5})$'
-    if webrtc_port=$(
-        curl -fsSL \
-            -H "Authorization: Bearer ${SUPERVISOR_TOKEN}" \
-            -H "Content-Type: application/json" \
-            http://supervisor/addons/self/info |
-            jq --exit-status --raw-output '.data.network["8555/tcp"]'
-    ) && [[ "${webrtc_port}" =~ ${port_regex} ]]; then
-        webrtc_port="${BASH_REMATCH[1]}"
-        echo "[INFO] Got WebRTC port from supervisor: ${webrtc_port}"
-    else
-        echo "[WARN] Failed to get WebRTC port from supervisor"
-        return 0
-    fi
-
-    export FRIGATE_GO2RTC_WEBRTC_CANDIDATE_INTERNAL="${ip_address}:${webrtc_port}"
-}
-
-function set_libva_version() {
-    local ffmpeg_path
-    ffmpeg_path=$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)
-    LIBAVFORMAT_VERSION_MAJOR=$("$ffmpeg_path" -version | grep -Po "libavformat\W+\K\d+")
-    export LIBAVFORMAT_VERSION_MAJOR
-}
-
-function setup_homekit_config() {
-    local config_path="$1"
-
-    if [[ ! -f "${config_path}" ]]; then
-        echo "[INFO] Creating empty HomeKit config file..."
-        echo '{}' > "${config_path}"
-    fi
-
-    # Convert YAML to JSON for jq processing
-    local temp_json="/tmp/cache/homekit_config.json"
-    yq eval -o=json "${config_path}" > "${temp_json}" 2>/dev/null || {
-        echo "[WARNING] Failed to convert HomeKit config to JSON, skipping cleanup"
-        return 0
-    }
-
-    # Use jq to filter and keep only the homekit section
-    local cleaned_json="/tmp/cache/homekit_cleaned.json"
-    jq '
-        # Keep only the homekit section if it exists, otherwise empty object
-        if has("homekit") then {homekit: .homekit} else {homekit: {}} end
-    ' "${temp_json}" > "${cleaned_json}" 2>/dev/null || echo '{"homekit": {}}' > "${cleaned_json}"
-
-    # Convert back to YAML and write to the config file
-    yq eval -P "${cleaned_json}" > "${config_path}" 2>/dev/null || {
-        echo "[WARNING] Failed to convert cleaned config to YAML, creating minimal config"
-        echo '{"homekit": {}}' > "${config_path}"
-    }
-
-    # Clean up temp files
-    rm -f "${temp_json}" "${cleaned_json}"
-}
-
-set_libva_version
-
-if [[ -f "/dev/shm/go2rtc.yaml" ]]; then
-    echo "[INFO] Removing stale config from last run..."
-    rm /dev/shm/go2rtc.yaml
-fi
-
-if [[ ! -f "/dev/shm/go2rtc.yaml" ]]; then
-    echo "[INFO] Preparing new go2rtc config..."
-
-    if [[ -n "${SUPERVISOR_TOKEN:-}" ]]; then
-        # Running as a Home Assistant Add-on, infer the IP address and port
-        get_ip_and_port_from_supervisor
-    fi
-
-    python3 /usr/local/go2rtc/create_config.py
-else
-    echo "[WARNING] Unable to remove existing go2rtc config. Changes made to your frigate config file may not be recognized. Please remove the /dev/shm/go2rtc.yaml from your docker host manually."
-fi
-
-# HomeKit configuration persistence setup
-readonly homekit_config_path="/config/go2rtc_homekit.yml"
-setup_homekit_config "${homekit_config_path}"
-
-readonly config_path="/config"
-
-if [[ -x "${config_path}/go2rtc" ]]; then
-  readonly binary_path="${config_path}/go2rtc"
-  echo "[WARN] Using go2rtc binary from '${binary_path}' instead of the embedded one"
-else
-  readonly binary_path="/usr/local/go2rtc/bin/go2rtc"
-fi
-
-echo "[INFO] Starting go2rtc..."
-
-# Replace the bash process with the go2rtc process, redirecting stderr to stdout
-# Use HomeKit config as the primary config so writebacks go there
-# The main config from Frigate will be loaded as a secondary config
-exec 2>&1
-exec "${binary_path}" -config="${homekit_config_path}" -config=/dev/shm/go2rtc.yaml

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/timeout-kill

@@ -1 +0,0 @@
-30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/type

@@ -1 +0,0 @@
-oneshot

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/log-prepare/run

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx-log/consumer-for

@@ -1 +0,0 @@
-nginx