Ensure motion is correctly set when adjusting masks

.cspell/frigate-dictionary.txt

@@ -22,6 +22,7 @@ autotrack
 autotracked
 autotracker
 autotracking
+backchannel
 balena
 Beelink
 BGRA

docs/docs/configuration/live.md

@@ -178,6 +178,8 @@ To use the Reolink Doorbell with two way talk, you should use the [recommended R
 
 As a starting point to check compatibility for your camera, view the list of cameras supported for two-way talk on the [go2rtc repository](https://github.com/AlexxIT/go2rtc?tab=readme-ov-file#two-way-audio). For cameras in the category `ONVIF Profile T`, you can use the [ONVIF Conformant Products Database](https://www.onvif.org/conformant-products/)'s FeatureList to check for the presence of `AudioOutput`. A camera that supports `ONVIF Profile T` _usually_ supports this, but due to inconsistent support, a camera that explicitly lists this feature may still not work. If no entry for your camera exists on the database, it is recommended not to buy it or to consult with the manufacturer's support on the feature availability.
 
+To prevent go2rtc from blocking other applications from accessing your camera's two-way audio, you must configure your stream with `#backchannel=0`. See [preventing go2rtc from blocking two-way audio](/configuration/restream#two-way-talk-restream) in the restream documentation.
+
 ### Streaming options on camera group dashboards
 
 Frigate provides a dialog in the Camera Group Edit pane with several options for streaming on a camera group's dashboard. These settings are _per device_ and are saved in your device's local storage.

docs/docs/configuration/restream.md

@@ -26,9 +26,10 @@ birdseye:
 
 :::tip
 
-To improve connection speed when using Birdseye via restream you can enable a small idle heartbeat by setting `birdseye.idle_heartbeat_fps` to a low value (e.g. `1–2`).  This makes Frigate periodically push the last frame even when no motion is detected, reducing initial connection latency.
+To improve connection speed when using Birdseye via restream you can enable a small idle heartbeat by setting `birdseye.idle_heartbeat_fps` to a low value (e.g. `1–2`). This makes Frigate periodically push the last frame even when no motion is detected, reducing initial connection latency.
 
 :::
+
 ### Securing Restream With Authentication
 
 The go2rtc restream can be secured with RTSP based username / password authentication. Ex:
@@ -159,6 +160,31 @@ go2rtc:
 
 See [this comment](https://github.com/AlexxIT/go2rtc/issues/1217#issuecomment-2242296489) for more information.
 
+## Preventing go2rtc from blocking two-way audio {#two-way-talk-restream}
+
+For cameras that support two-way talk, go2rtc will automatically establish an audio output backchannel when connecting to an RTSP stream. This backchannel blocks access to the camera's audio output for two-way talk functionality, preventing both Frigate and other applications from using it.
+
+To prevent this, you must configure two separate stream instances:
+
+1. One stream instance with `#backchannel=0` for Frigate's viewing, recording, and detection (prevents go2rtc from establishing the blocking backchannel)
+2. A second stream instance without `#backchannel=0` for two-way talk functionality (can be used by Frigate's WebRTC viewer or other applications)
+
+Configuration example:
+
+```yaml
+go2rtc:
+  streams:
+    front_door:
+      - rtsp://user:password@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2#backchannel=0
+    front_door_twoway:
+      - rtsp://user:password@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
+```
+
+In this configuration:
+
+- `front_door` stream is used by Frigate for viewing, recording, and detection. The `#backchannel=0` parameter prevents go2rtc from establishing the audio output backchannel, so it won't block two-way talk access.
+- `front_door_twoway` stream is used for two-way talk functionality. This stream can be used by Frigate's WebRTC viewer when two-way talk is enabled, or by other applications (like Home Assistant Advanced Camera Card) that need access to the camera's audio output channel.
+
 ## Advanced Restream Configurations
 
 The [exec](https://github.com/AlexxIT/go2rtc/tree/v1.9.10#source-exec) source in go2rtc can be used for custom ffmpeg commands. An example is below:

docs/docs/guides/configuring_go2rtc.md

@@ -113,6 +113,7 @@ section.
 
 1. If the stream you added to go2rtc is also used by Frigate for the `record` or `detect` role, you can migrate your config to pull from the RTSP restream to reduce the number of connections to your camera as shown [here](/configuration/restream#reduce-connections-to-camera).
 2. You can [set up WebRTC](/configuration/live#webrtc-extra-configuration) if your camera supports two-way talk. Note that WebRTC only supports specific audio formats and may require opening ports on your router.
+3. If your camera supports two-way talk, you must configure your stream with `#backchannel=0` to prevent go2rtc from blocking other applications from accessing the camera's audio output. See [preventing go2rtc from blocking two-way audio](/configuration/restream#two-way-talk-restream) in the restream documentation.
 
 ## Homekit Configuration
 

docs/package.json

@@ -18,14 +18,14 @@
   },
   "dependencies": {
     "@docusaurus/core": "^3.7.0",
-    "@docusaurus/plugin-content-docs": "^3.6.3",
+    "@docusaurus/plugin-content-docs": "^3.7.0",
     "@docusaurus/preset-classic": "^3.7.0",
-    "@docusaurus/theme-mermaid": "^3.6.3",
+    "@docusaurus/theme-mermaid": "^3.7.0",
     "@inkeep/docusaurus": "^2.0.16",
     "@mdx-js/react": "^3.1.0",
     "clsx": "^2.1.1",
-    "docusaurus-plugin-openapi-docs": "^4.3.1",
+    "docusaurus-plugin-openapi-docs": "^4.5.1",
-    "docusaurus-theme-openapi-docs": "^4.3.1",
+    "docusaurus-theme-openapi-docs": "^4.5.1",
     "prism-react-renderer": "^2.4.1",
     "raw-loader": "^4.0.2",
     "react": "^18.3.1",
@@ -44,9 +44,9 @@
     ]
   },
   "devDependencies": {
-    "@docusaurus/module-type-aliases": "^3.4.0",
+    "@docusaurus/module-type-aliases": "^3.7.0",
-    "@docusaurus/types": "^3.4.0",
+    "@docusaurus/types": "^3.7.0",
-    "@types/react": "^18.3.7"
+    "@types/react": "^18.3.27"
   },
   "engines": {
     "node": ">=18.0"

frigate/api/preview.py

@@ -5,10 +5,14 @@ import os
 from datetime import datetime, timedelta, timezone
 
 import pytz
-from fastapi import APIRouter, Depends
+from fastapi import APIRouter, Depends, HTTPException
 from fastapi.responses import JSONResponse
 
-from frigate.api.auth import require_camera_access
+from frigate.api.auth import (
+    allow_any_authenticated,
+    get_allowed_cameras_for_filter,
+    require_camera_access,
+)
 from frigate.api.defs.response.preview_response import (
     PreviewFramesResponse,
     PreviewsResponse,
@@ -26,19 +30,32 @@ router = APIRouter(tags=[Tags.preview])
 @router.get(
     "/preview/{camera_name}/start/{start_ts}/end/{end_ts}",
     response_model=PreviewsResponse,
-    dependencies=[Depends(require_camera_access)],
+    dependencies=[Depends(allow_any_authenticated())],
     summary="Get preview clips for time range",
     description="""Gets all preview clips for a specified camera and time range.
     Returns a list of preview video clips that overlap with the requested time period,
     ordered by start time. Use camera_name='all' to get previews from all cameras.
     Returns an error if no previews are found.""",
 )
-def preview_ts(camera_name: str, start_ts: float, end_ts: float):
+def preview_ts(
+    camera_name: str,
+    start_ts: float,
+    end_ts: float,
+    allowed_cameras: list[str] = Depends(get_allowed_cameras_for_filter),
+):
     """Get all mp4 previews relevant for time period."""
     if camera_name != "all":
-        camera_clause = Previews.camera == camera_name
+        if camera_name not in allowed_cameras:
+            raise HTTPException(status_code=403, detail="Access denied for camera")
+        camera_list = [camera_name]
     else:
-        camera_clause = True
+        camera_list = allowed_cameras
+
+    if not camera_list:
+        return JSONResponse(
+            content={"success": False, "message": "No previews found."},
+            status_code=404,
+        )
 
     previews = (
         Previews.select(
@@ -53,7 +70,7 @@ def preview_ts(camera_name: str, start_ts: float, end_ts: float):
             | Previews.end_time.between(start_ts, end_ts)
             | ((start_ts > Previews.start_time) & (end_ts < Previews.end_time))
         )
-        .where(camera_clause)
+        .where(Previews.camera << camera_list)
         .order_by(Previews.start_time.asc())
         .dicts()
         .iterator()
@@ -88,14 +105,21 @@ def preview_ts(camera_name: str, start_ts: float, end_ts: float):
 @router.get(
     "/preview/{year_month}/{day}/{hour}/{camera_name}/{tz_name}",
     response_model=PreviewsResponse,
-    dependencies=[Depends(require_camera_access)],
+    dependencies=[Depends(allow_any_authenticated())],
     summary="Get preview clips for specific hour",
     description="""Gets all preview clips for a specific hour in a given timezone.
     Converts the provided date/time from the specified timezone to UTC and retrieves
     all preview clips for that hour. Use camera_name='all' to get previews from all cameras.
     The tz_name should be a timezone like 'America/New_York' (use commas instead of slashes).""",
 )
-def preview_hour(year_month: str, day: int, hour: int, camera_name: str, tz_name: str):
+def preview_hour(
+    year_month: str,
+    day: int,
+    hour: int,
+    camera_name: str,
+    tz_name: str,
+    allowed_cameras: list[str] = Depends(get_allowed_cameras_for_filter),
+):
     """Get all mp4 previews relevant for time period given the timezone"""
     parts = year_month.split("-")
     start_date = (
@@ -106,7 +130,7 @@ def preview_hour(year_month: str, day: int, hour: int, camera_name: str, tz_name
     start_ts = start_date.timestamp()
     end_ts = end_date.timestamp()
 
-    return preview_ts(camera_name, start_ts, end_ts)
+    return preview_ts(camera_name, start_ts, end_ts, allowed_cameras)
 
 
 @router.get(

frigate/motion/improved_motion.py

@@ -239,6 +239,12 @@ class ImprovedMotionDetector(MotionDetector):
         )
         self.mask = np.where(resized_mask == [0])
 
+        # Reset motion detection state when mask changes
+        # so motion detection can quickly recalibrate with the new mask
+        self.avg_frame = np.zeros(self.motion_frame_size, np.float32)
+        self.calibrating = True
+        self.motion_frame_count = 0
+
     def stop(self) -> None:
         """stop the motion detector."""
         pass

frigate/track/object_processing.py

@@ -78,6 +78,8 @@ class TrackedObjectProcessor(threading.Thread):
             [
                 CameraConfigUpdateEnum.add,
                 CameraConfigUpdateEnum.enabled,
+                CameraConfigUpdateEnum.motion,
+                CameraConfigUpdateEnum.objects,
                 CameraConfigUpdateEnum.remove,
                 CameraConfigUpdateEnum.zones,
             ],

frigate/video.py

@@ -771,6 +771,7 @@ def process_frames(
             camera_enabled = camera_config.enabled
 
         if "motion" in updated_configs:
+            motion_detector.config = camera_config.motion
             motion_detector.update_mask()
 
         if (

web/public/locales/en/views/settings.json

@@ -330,7 +330,8 @@
         "audioCodecRequired": "An audio stream is required to support audio detection.",
         "restreamingWarning": "Reducing connections to the camera for the record stream may increase CPU usage slightly.",
         "brands": {
-          "reolink-rtsp": "Reolink RTSP is not recommended. Enable HTTP in the camera's firmware settings and restart the wizard."
+          "reolink-rtsp": "Reolink RTSP is not recommended. Enable HTTP in the camera's firmware settings and restart the wizard.",
+          "reolink-http": "Reolink HTTP streams should use FFmpeg for better compatibility. Enable 'Use stream compatibility mode' for this stream."
         },
         "dahua": {
           "substreamWarning": "Substream 1 is locked to a low resolution. Many Dahua / Amcrest / EmpireTech cameras support additional substreams that need to be enabled in the camera's settings. It is recommended to check and utilize those streams if available."
@@ -769,7 +770,8 @@
         "updatePassword": "Update Password for {{username}}",
         "setPassword": "Set Password",
         "desc": "Create a strong password to secure this account.",
-        "multiDeviceWarning": "Any other devices where you are logged in will be required to re-login within {{refresh_time}}. You can also force all users to re-authenticate immediately by rotating your JWT secret."
+        "multiDeviceWarning": "Any other devices where you are logged in will be required to re-login within {{refresh_time}}.",
+        "multiDeviceAdmin": "You can also force all users to re-authenticate immediately by rotating your JWT secret."
       },
       "changeRole": {
         "title": "Change User Role",

web/src/components/overlay/SetPasswordDialog.tsx

@@ -26,6 +26,7 @@ import ActivityIndicator from "../indicators/activity-indicator";
 import { zodResolver } from "@hookform/resolvers/zod";
 import { useForm } from "react-hook-form";
 import { z } from "zod";
+import { useIsAdmin } from "@/hooks/use-is-admin";
 
 type SetPasswordProps = {
   show: boolean;
@@ -46,6 +47,7 @@ export default function SetPasswordDialog({
 }: SetPasswordProps) {
   const { t } = useTranslation(["views/settings", "common"]);
   const { getLocaleDocUrl } = useDocDomain();
+  const isAdmin = useIsAdmin();
 
   const { data: config } = useSWR("config");
   const refreshSeconds: number | undefined =
@@ -233,19 +235,28 @@ export default function SetPasswordDialog({
               ns: "views/settings",
             })}
           </p>
-          <p className="text-sm text-primary-variant">
+          {isAdmin && (
-            <a
+            <>
-              href={getLocaleDocUrl(
+              <p className="text-sm text-muted-foreground">
-                "configuration/authentication#jwt-token-secret",
+                {t("users.dialog.passwordSetting.multiDeviceAdmin", {
-              )}
+                  ns: "views/settings",
-              target="_blank"
+                })}
-              rel="noopener noreferrer"
+              </p>
-              className="inline-flex items-center text-primary"
+              <p className="text-sm text-primary-variant">
-            >
+                <a
-              {t("readTheDocumentation", { ns: "common" })}
+                  href={getLocaleDocUrl(
-              <LuExternalLink className="ml-2 size-3" />
+                    "configuration/authentication#jwt-token-secret",
-            </a>
+                  )}
-          </p>
+                  target="_blank"
+                  rel="noopener noreferrer"
+                  className="inline-flex items-center text-primary"
+                >
+                  {t("readTheDocumentation", { ns: "common" })}
+                  <LuExternalLink className="ml-2 size-3" />
+                </a>
+              </p>
+            </>
+          )}
         </DialogHeader>
 
         <Form {...form}>

web/src/components/settings/PolygonItem.tsx

@@ -26,7 +26,7 @@ import {
   toRGBColorString,
 } from "@/utils/canvasUtil";
 import { Polygon, PolygonType } from "@/types/canvas";
-import { useCallback, useContext, useMemo, useState } from "react";
+import { useCallback, useMemo, useState } from "react";
 import axios from "axios";
 import { Toaster } from "@/components/ui/sonner";
 import { toast } from "sonner";
@@ -34,7 +34,6 @@ import useSWR from "swr";
 import { FrigateConfig } from "@/types/frigateConfig";
 import { reviewQueries } from "@/utils/zoneEdutUtil";
 import IconWrapper from "../ui/icon-wrapper";
-import { StatusBarMessagesContext } from "@/context/statusbar-provider";
 import { buttonVariants } from "../ui/button";
 import { Trans, useTranslation } from "react-i18next";
 
@@ -61,7 +60,6 @@ export default function PolygonItem({
   const { data: config, mutate: updateConfig } =
     useSWR<FrigateConfig>("config");
   const [deleteDialogOpen, setDeleteDialogOpen] = useState(false);
-  const { addMessage } = useContext(StatusBarMessagesContext)!;
   const [isLoading, setIsLoading] = useState(false);
 
   const cameraConfig = useMemo(() => {
@@ -171,10 +169,22 @@ export default function PolygonItem({
         }
       }
 
+      const updateTopicType =
+        polygon.type === "zone"
+          ? "zones"
+          : polygon.type === "motion_mask"
+            ? "motion"
+            : polygon.type === "object_mask"
+              ? "objects"
+              : polygon.type;
+
       setIsLoading(true);
 
       await axios
-        .put(`config/set?${url}`, { requires_restart: 0 })
+        .put(`config/set?${url}`, {
+          requires_restart: 0,
+          update_topic: `config/cameras/${polygon.camera}/${updateTopicType}`,
+        })
         .then((res) => {
           if (res.status === 200) {
             toast.success(
@@ -220,12 +230,6 @@ export default function PolygonItem({
   const handleDelete = () => {
     setActivePolygonIndex(undefined);
     saveToConfig(polygon);
-    addMessage(
-      "masks_zones",
-      t("masksAndZones.restart_required"),
-      undefined,
-      "masks_zones",
-    );
   };
 
   return (

web/src/components/settings/wizard/Step4Validation.tsx

@@ -490,6 +490,13 @@ function StreamIssues({
           message: t("cameraWizard.step4.issues.brands.reolink-rtsp"),
         });
       }
+
+      if (streamUrl.startsWith("http://") && !stream.useFfmpeg) {
+        result.push({
+          type: "warning",
+          message: t("cameraWizard.step4.issues.brands.reolink-http"),
+        });
+      }
     }
 
     // Video codec check