Update coral docs / links (#20674)

* Revise GPU and AI accelerator recommendations

Updated hardware recommendations for AI acceleration.

* Revise PCIe Coral driver installation instructions

Updated instructions for PCIe Coral driver installation.

* Revise Coral driver installation instructions

Updated driver installation instructions for PCIe and M.2 versions of Google Coral.

* Change PCIe Coral driver link in getting_started.md

Updated the link for PCIe Coral driver instructions.

* Change PCIe Coral driver link in installation guide

Updated the link for PCIe Coral driver instructions.

* Update Coral TPU recommendation in hardware documentation

Added a warning about the Coral TPU's recommendation status for new Frigate installations and suggested alternatives.

README.md

@@ -12,7 +12,7 @@
 
 A complete and local NVR designed for [Home Assistant](https://www.home-assistant.io) with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
 
-Use of a GPU or AI accelerator such as a [Google Coral](https://coral.ai/products/) or [Hailo](https://hailo.ai/) is highly recommended. AI accelerators will outperform even the best CPUs with very little overhead.
+Use of a GPU, Integrated GPU, or AI accelerator such as a [Hailo](https://hailo.ai/) is highly recommended. Dedicated hardware will outperform even the best CPUs with very little overhead.
 
 - Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
 - Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary

docs/docs/configuration/pwa.md

@@ -11,7 +11,7 @@ This adds features including the ability to deep link directly into the app.
 
 In order to install Frigate as a PWA, the following requirements must be met:
 
-- Frigate must be accessed via a secure context (localhost, secure https, etc.)
+- Frigate must be accessed via a secure context (localhost, secure https, VPN, etc.)
 - On Android, Firefox, Chrome, Edge, Opera, and Samsung Internet Browser all support installing PWAs.
 - On iOS 16.4 and later, PWAs can be installed from the Share menu in Safari, Chrome, Edge, Firefox, and Orion.
 
@@ -22,3 +22,7 @@ Installation varies slightly based on the device that is being used:
 - Desktop: Use the install button typically found in right edge of the address bar
 - Android: Use the `Install as App` button in the more options menu for Chrome, and the `Add app to Home screen` button for Firefox
 - iOS: Use the `Add to Homescreen` button in the share menu
+
+## Usage
+
+Once setup, the Frigate app can be used wherever it has access to Frigate. This means it can be setup as local-only, VPN-only, or fully accessible depending on your needs.

docs/docs/frigate/hardware.md

@@ -104,10 +104,16 @@ In real-world deployments, even with multiple cameras running concurrently, Frig
 
 ### Google Coral TPU
 
+:::warning
+
+The Coral is no longer recommended for new Frigate installations, except in deployments with particularly low power requirements or hardware incapable of utilizing alternative AI accelerators for object detection. Instead, we suggest using one of the numerous other supported object detectors. Frigate will continue to provide support for the Coral TPU for as long as practicably possible given its still one of the most power-efficient devices for executing object detection models.
+
+:::
+
 Frigate supports both the USB and M.2 versions of the Google Coral.
 
 - The USB version is compatible with the widest variety of hardware and does not require a driver on the host machine. However, it does lack the automatic throttling features of the other versions.
-- The PCIe and M.2 versions require installation of a driver on the host. Follow the instructions for your version from https://coral.ai
+- The PCIe and M.2 versions require installation of a driver on the host. https://github.com/jnicolson/gasket-builder should be used.
 
 A single Coral can handle many cameras using the default model and will be sufficient for the majority of users. You can calculate the maximum performance of your Coral based on the inference speed reported by Frigate. With an inference speed of 10, your Coral will top out at `1000/10=100`, or 100 frames per second. If your detection fps is regularly getting close to that, you should first consider tuning motion masks. If those are already properly configured, a second Coral may be needed.
 

docs/docs/frigate/installation.md

@@ -200,7 +200,7 @@ services:
     shm_size: "512mb" # update for your cameras based on calculation above
     devices:
       - /dev/bus/usb:/dev/bus/usb # Passes the USB Coral, needs to be modified for other versions
-      - /dev/apex_0:/dev/apex_0 # Passes a PCIe Coral, follow driver instructions here https://coral.ai/docs/m2/get-started/#2a-on-linux
+      - /dev/apex_0:/dev/apex_0 # Passes a PCIe Coral, follow driver instructions here https://github.com/jnicolson/gasket-builder
       - /dev/video11:/dev/video11 # For Raspberry Pi 4B
       - /dev/dri/renderD128:/dev/dri/renderD128 # For intel hwaccel, needs to be updated for your hardware
     volumes:

docs/docs/guides/getting_started.md

@@ -202,7 +202,7 @@ services:
     ...
     devices:
       - /dev/bus/usb:/dev/bus/usb # passes the USB Coral, needs to be modified for other versions
-      - /dev/apex_0:/dev/apex_0 # passes a PCIe Coral, follow driver instructions here https://coral.ai/docs/m2/get-started/#2a-on-linux
+      - /dev/apex_0:/dev/apex_0 # passes a PCIe Coral, follow driver instructions here https://github.com/jnicolson/gasket-builder
     ...
 ```
 

docs/docs/troubleshooting/edgetpu.md

@@ -68,8 +68,7 @@ The USB Coral can become stuck and need to be restarted, this can happen for a n
 
 The most common reason for the PCIe Coral not being detected is that the driver has not been installed. This process varies based on what OS and kernel that is being run.
 
-- In most cases [the Coral docs](https://coral.ai/docs/m2/get-started/#2-install-the-pcie-driver-and-edge-tpu-runtime) show how to install the driver for the PCIe based Coral.
-- For some newer Linux distros (for example, Ubuntu 22.04+), https://github.com/jnicolson/gasket-builder can be used to build and install the latest version of the driver.
+- In most cases https://github.com/jnicolson/gasket-builder can be used to build and install the latest version of the driver.
 
 ## Attempting to load TPU as pci & Fatal Python error: Illegal instruction