Merge 097673b845 into 3620ef27db

* chore: i18n use cache key

* Fix indentation in Dockerfile for pip command

* Add build argument for GIT_COMMIT_HASH in CI workflow

* Add short-sha output to action.yml

* Update build args to use short SHA output

* build: use vite .env

* Remove unnecessary newline in Dockerfile

* Define proxy host variable in vite.config.ts

Add a new line to define the proxy host variable.

.gitignore

@@ -15,6 +15,7 @@ frigate/version.py
 web/build
 web/node_modules
 web/coverage
+web/.env
 core
 !/web/**/*.ts
 .idea/*

Makefile

@@ -14,6 +14,7 @@ push-boards: $(BOARDS:%=push-%)
 
 version:
 	echo 'VERSION = "$(VERSION)-$(COMMIT_HASH)"' > frigate/version.py
+	echo 'VITE_GIT_COMMIT_HASH=$(COMMIT_HASH)' > web/.env
 
 local: version
 	docker buildx build --target=frigate --file docker/main/Dockerfile . \

README.md

@@ -12,7 +12,7 @@
 
 A complete and local NVR designed for [Home Assistant](https://www.home-assistant.io) with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
 
-Use of a GPU or AI accelerator such as a [Google Coral](https://coral.ai/products/) or [Hailo](https://hailo.ai/) is highly recommended. AI accelerators will outperform even the best CPUs with very little overhead.
+Use of a GPU, Integrated GPU, or AI accelerator such as a [Hailo](https://hailo.ai/) is highly recommended. Dedicated hardware will outperform even the best CPUs with very little overhead.
 
 - Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
 - Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary

docs/docs/configuration/live.md

@@ -15,7 +15,7 @@ The jsmpeg live view will use more browser and client GPU resources. Using go2rt
 | ------ | ------------------------------------- | ---------- | ---------------------------- | --------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | jsmpeg | same as `detect -> fps`, capped at 10 | 720p       | no                           | no              | Resolution is configurable, but go2rtc is recommended if you want higher resolutions and better frame rates. jsmpeg is Frigate's default without go2rtc configured. |
 | mse    | native                                | native     | yes (depends on audio codec) | yes             | iPhone requires iOS 17.1+, Firefox is h.264 only. This is Frigate's default when go2rtc is configured.                                                              |
-| webrtc | native                                | native     | yes (depends on audio codec) | yes             | Requires extra configuration, doesn't support h.265. Frigate attempts to use WebRTC when MSE fails or when using a camera's two-way talk feature.                   |
+| webrtc | native                                | native     | yes (depends on audio codec) | yes             | Requires extra configuration. Frigate attempts to use WebRTC when MSE fails or when using a camera's two-way talk feature.                   |
 
 ### Camera Settings Recommendations
 
@@ -127,7 +127,8 @@ WebRTC works by creating a TCP or UDP connection on port `8555`. However, it req
   ```
 
 - For access through Tailscale, the Frigate system's Tailscale IP must be added as a WebRTC candidate. Tailscale IPs all start with `100.`, and are reserved within the `100.64.0.0/10` CIDR block.
-- Note that WebRTC does not support H.265.
+
+- Note that some browsers may not support H.265 (HEVC). You can check your browser's current version for H.265 compatibility [here](https://github.com/AlexxIT/go2rtc?tab=readme-ov-file#codecs-madness). 
 
 :::tip
 

docs/docs/configuration/pwa.md

@@ -11,7 +11,7 @@ This adds features including the ability to deep link directly into the app.
 
 In order to install Frigate as a PWA, the following requirements must be met:
 
-- Frigate must be accessed via a secure context (localhost, secure https, etc.)
+- Frigate must be accessed via a secure context (localhost, secure https, VPN, etc.)
 - On Android, Firefox, Chrome, Edge, Opera, and Samsung Internet Browser all support installing PWAs.
 - On iOS 16.4 and later, PWAs can be installed from the Share menu in Safari, Chrome, Edge, Firefox, and Orion.
 
@@ -22,3 +22,7 @@ Installation varies slightly based on the device that is being used:
 - Desktop: Use the install button typically found in right edge of the address bar
 - Android: Use the `Install as App` button in the more options menu for Chrome, and the `Add app to Home screen` button for Firefox
 - iOS: Use the `Add to Homescreen` button in the share menu
+
+## Usage
+
+Once setup, the Frigate app can be used wherever it has access to Frigate. This means it can be setup as local-only, VPN-only, or fully accessible depending on your needs.

docs/docs/frigate/hardware.md

@@ -36,9 +36,11 @@ If the EQ13 is out of stock, the link below may take you to a suggested alternat
 
 :::
 
-| Name                                                                                                          | Coral Inference Speed | Coral Compatibility | Notes                                                                                     |
-| ------------------------------------------------------------------------------------------------------------- | --------------------- | ------------------- | ----------------------------------------------------------------------------------------- |
-| Beelink EQ13 (<a href="https://amzn.to/4jn2qVr" target="_blank" rel="nofollow noopener sponsored">Amazon</a>) | 5-10ms                | USB                 | Dual gigabit NICs for easy isolated camera network. Easily handles several 1080p cameras. |
+| Name                                                                                                          | Capabilities                                                               | Notes                                               |
+| ------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------- | --------------------------------------------------- |
+| Beelink EQ13 (<a href="https://amzn.to/4jn2qVr" target="_blank" rel="nofollow noopener sponsored">Amazon</a>) | Can run object detection on several 1080p cameras with low-medium activity | Dual gigabit NICs for easy isolated camera network. |
+| Intel 1120p ([Amazon](https://www.amazon.com/Beelink-i3-1220P-Computer-Display-Gigabit/dp/B0DDCKT9YP)         | Can handle a large number of 1080p cameras with high activity              |                                                     |
+| Intel 125H  ([Amazon](https://www.amazon.com/MINISFORUM-Pro-125H-Barebone-Computer-HDMI2-1/dp/B0FH21FSZM)     | Can handle a significant number of 1080p cameras with high activity        | Includes NPU for more efficient detection in 0.17+  |
 
 ## Detectors
 
@@ -129,10 +131,16 @@ In real-world deployments, even with multiple cameras running concurrently, Frig
 
 ### Google Coral TPU
 
+:::warning
+
+The Coral is no longer recommended for new Frigate installations, except in deployments with particularly low power requirements or hardware incapable of utilizing alternative AI accelerators for object detection. Instead, we suggest using one of the numerous other supported object detectors. Frigate will continue to provide support for the Coral TPU for as long as practicably possible given its still one of the most power-efficient devices for executing object detection models.
+
+:::
+
 Frigate supports both the USB and M.2 versions of the Google Coral.
 
 - The USB version is compatible with the widest variety of hardware and does not require a driver on the host machine. However, it does lack the automatic throttling features of the other versions.
-- The PCIe and M.2 versions require installation of a driver on the host. Follow the instructions for your version from https://coral.ai
+- The PCIe and M.2 versions require installation of a driver on the host. https://github.com/jnicolson/gasket-builder should be used.
 
 A single Coral can handle many cameras using the default model and will be sufficient for the majority of users. You can calculate the maximum performance of your Coral based on the inference speed reported by Frigate. With an inference speed of 10, your Coral will top out at `1000/10=100`, or 100 frames per second. If your detection fps is regularly getting close to that, you should first consider tuning motion masks. If those are already properly configured, a second Coral may be needed.
 

docs/docs/frigate/installation.md

@@ -94,6 +94,10 @@ $ python -c 'print("{:.2f}MB".format(((1280 * 720 * 1.5 * 20 + 270480) / 1048576
 
 The shm size cannot be set per container for Home Assistant add-ons. However, this is probably not required since by default Home Assistant Supervisor allocates `/dev/shm` with half the size of your total memory. If your machine has 8GB of memory, chances are that Frigate will have access to up to 4GB without any additional configuration.
 
+## Extra Steps for Specific Hardware
+
+The following sections contain additional setup steps that are only required if you are using specific hardware. If you are not using any of these hardware types, you can skip to the [Docker](#docker) installation section.
+
 ### Raspberry Pi 3/4
 
 By default, the Raspberry Pi limits the amount of memory available to the GPU. In order to use ffmpeg hardware acceleration, you must increase the available memory by setting `gpu_mem` to the maximum recommended value in `config.txt` as described in the [official docs](https://www.raspberrypi.org/documentation/computers/config_txt.html#memory-options).
@@ -106,14 +110,107 @@ The Hailo-8 and Hailo-8L AI accelerators are available in both M.2 and HAT form
 
 #### Installation
 
-For Raspberry Pi 5 users with the AI Kit, installation is straightforward. Simply follow this [guide](https://www.raspberrypi.com/documentation/accessories/ai-kit.html#ai-kit-installation) to install the driver and software.
+:::warning
 
-For other installations, follow these steps for installation:
+The Raspberry Pi kernel includes an older version of the Hailo driver that is incompatible with Frigate. You **must** follow the installation steps below to install the correct driver version, and you **must** disable the built-in kernel driver as described in step 1.
 
-1. Install the driver from the [Hailo GitHub repository](https://github.com/hailo-ai/hailort-drivers). A convenient script for Linux is available to clone the repository, build the driver, and install it.
-2. Copy or download [this script](https://github.com/blakeblackshear/frigate/blob/dev/docker/hailo8l/user_installation.sh).
-3. Ensure it has execution permissions with `sudo chmod +x user_installation.sh`
-4. Run the script with `./user_installation.sh`
+:::
+
+1. **Disable the built-in Hailo driver (Raspberry Pi only)**:
+
+   :::note
+
+   If you are **not** using a Raspberry Pi, skip this step and proceed directly to step 2.
+
+   :::
+
+   If you are using a Raspberry Pi, you need to blacklist the built-in kernel Hailo driver to prevent conflicts. First, check if the driver is currently loaded:
+
+   ```bash
+   lsmod | grep hailo
+   ```
+
+   If it shows `hailo_pci`, unload it:
+
+   ```bash
+   sudo rmmod hailo_pci
+   ```
+
+   Now blacklist the driver to prevent it from loading on boot:
+
+   ```bash
+   echo "blacklist hailo_pci" | sudo tee /etc/modprobe.d/blacklist-hailo_pci.conf
+   ```
+
+   Update initramfs to ensure the blacklist takes effect:
+
+   ```bash
+   sudo update-initramfs -u
+   ```
+
+   Reboot your Raspberry Pi:
+
+   ```bash
+   sudo reboot
+   ```
+
+   After rebooting, verify the built-in driver is not loaded:
+
+   ```bash
+   lsmod | grep hailo
+   ```
+
+   This command should return no results. If it still shows `hailo_pci`, the blacklist did not take effect properly and you may need to check for other Hailo packages installed via apt that are loading the driver.
+
+2. **Run the installation script**:
+
+   Download the installation script:
+
+   ```bash
+   wget https://raw.githubusercontent.com/blakeblackshear/frigate/dev/docker/hailo8l/user_installation.sh
+   ```
+
+   Make it executable:
+
+   ```bash
+   sudo chmod +x user_installation.sh
+   ```
+
+   Run the script:
+
+   ```bash
+   ./user_installation.sh
+   ```
+
+   The script will:
+
+   - Install necessary build dependencies
+   - Clone and build the Hailo driver from the official repository
+   - Install the driver
+   - Download and install the required firmware
+   - Set up udev rules
+
+3. **Reboot your system**:
+
+   After the script completes successfully, reboot to load the firmware:
+
+   ```bash
+   sudo reboot
+   ```
+
+4. **Verify the installation**:
+
+   After rebooting, verify that the Hailo device is available:
+
+   ```bash
+   ls -l /dev/hailo0
+   ```
+
+   You should see the device listed. You can also verify the driver is loaded:
+
+   ```bash
+   lsmod | grep hailo_pci
+   ```
 
 #### Setup
 
@@ -302,7 +399,7 @@ services:
     shm_size: "512mb" # update for your cameras based on calculation above
     devices:
       - /dev/bus/usb:/dev/bus/usb # Passes the USB Coral, needs to be modified for other versions
-      - /dev/apex_0:/dev/apex_0 # Passes a PCIe Coral, follow driver instructions here https://coral.ai/docs/m2/get-started/#2a-on-linux
+      - /dev/apex_0:/dev/apex_0 # Passes a PCIe Coral, follow driver instructions here https://github.com/jnicolson/gasket-builder
       - /dev/video11:/dev/video11 # For Raspberry Pi 4B
       - /dev/dri/renderD128:/dev/dri/renderD128 # AMD / Intel GPU, needs to be updated for your hardware
       - /dev/accel:/dev/accel # Intel NPU

docs/docs/guides/getting_started.md

@@ -202,7 +202,7 @@ services:
     ...
     devices:
       - /dev/bus/usb:/dev/bus/usb # passes the USB Coral, needs to be modified for other versions
-      - /dev/apex_0:/dev/apex_0 # passes a PCIe Coral, follow driver instructions here https://coral.ai/docs/m2/get-started/#2a-on-linux
+      - /dev/apex_0:/dev/apex_0 # passes a PCIe Coral, follow driver instructions here https://github.com/jnicolson/gasket-builder
     ...
 ```
 

docs/docs/troubleshooting/edgetpu.md

@@ -68,8 +68,7 @@ The USB Coral can become stuck and need to be restarted, this can happen for a n
 
 The most common reason for the PCIe Coral not being detected is that the driver has not been installed. This process varies based on what OS and kernel that is being run.
 
-- In most cases [the Coral docs](https://coral.ai/docs/m2/get-started/#2-install-the-pcie-driver-and-edge-tpu-runtime) show how to install the driver for the PCIe based Coral.
-- For some newer Linux distros (for example, Ubuntu 22.04+), https://github.com/jnicolson/gasket-builder can be used to build and install the latest version of the driver.
+- In most cases https://github.com/jnicolson/gasket-builder can be used to build and install the latest version of the driver.
 
 ## Attempting to load TPU as pci & Fatal Python error: Illegal instruction
 

web/.gitignore

@@ -22,3 +22,4 @@ dist-ssr
 *.njsproj
 *.sln
 *.sw?
+.env

web/src/utils/i18n.ts

@@ -33,7 +33,7 @@ i18n
     fallbackLng: "en", // use en if detected lng is not available
 
     backend: {
-      loadPath: "locales/{{lng}}/{{ns}}.json",
+      loadPath: `locales/{{lng}}/{{ns}}.json?v=${import.meta.env.VITE_GIT_COMMIT_HASH || "unknown"}`,
     },
 
     ns: [

web/src/views/settings/UiSettingsView.tsx

@@ -157,7 +157,7 @@ export default function UiSettingsView() {
                   checked={cameraNames}
                   onCheckedChange={setCameraName}
                 />
-                <Label className="cursor-pointer" htmlFor="auto-live">
+                <Label className="cursor-pointer" htmlFor="camera-names">
                   {t("general.liveDashboard.displayCameraNames.label")}
                 </Label>
               </div>