Merge 8ea5eb6bd1 into 652ea2454f

* display zone names consistently using friendly_name or raw id without transformation

* enforce camera-level access on go2rtc live stream websocket endpoints

docs/docs/configuration/live.md

@@ -432,3 +432,5 @@ When your browser runs into problems playing back your camera streams, it will l
              roles:
                - detect
    ```
+
+   The same applies to your `record` stream: if its aspect ratio differs from your `detect` stream, your recordings will appear in a different shape than the live view. For consistent framing across live view and recordings, use the same aspect ratio for all of a camera's streams (the resolution can still differ).

docs/docs/guides/reverse_proxy.md

@@ -10,13 +10,14 @@ A reverse proxy is typically needed if you want to set up Frigate on a custom UR
 Before setting up a reverse proxy, check if any of the built-in functionality in Frigate suits your needs:
 |Topic|Docs|
 |-|-|
-|TLS|Please see the  `tls` [configuration option](../configuration/tls.md)|
+|TLS|Please see the `tls` [configuration option](../configuration/tls.md)|
 |Authentication|Please see the [authentication](../configuration/authentication.md) documentation|
 |IPv6|[Enabling IPv6](../configuration/advanced/system.md#enabling-ipv6)
 
-**Note about TLS**  
-When using a reverse proxy, the TLS session is usually terminated at the proxy, sending the internal request over plain HTTP. If this is the desired behavior, TLS must first be disabled in Frigate, or you will encounter an HTTP 400 error: "The plain HTTP request was sent to HTTPS port."  
+**Note about TLS**
+When using a reverse proxy, the TLS session is usually terminated at the proxy, sending the internal request over plain HTTP. If this is the desired behavior, TLS must first be disabled in Frigate, or you will encounter an HTTP 400 error: "The plain HTTP request was sent to HTTPS port."
 To disable TLS, set the following in your Frigate configuration:
+
 ```yml
 tls:
   enabled: false
@@ -24,18 +25,26 @@ tls:
 
 :::warning
 A reverse proxy can be used to secure access to an internal web server, but the user will be entirely reliant on the steps they have taken. You must ensure you are following security best practices.
-This page does not attempt to outline the specific steps needed to secure your internal website.  
+This page does not attempt to outline the specific steps needed to secure your internal website.
 Please use your own knowledge to assess and vet the reverse proxy software before you install anything on your system.
 :::
 
+## WebSocket support
+
+Frigate relies on WebSockets for real-time communication between the browser and the backend. Features such as camera controls (enabling/disabling a camera, audio, detect, recordings, and other toggles), live stream playback, and other live-updating parts of the UI will not function correctly if WebSocket connections are not proxied.
+
+Your reverse proxy must be configured to forward the `Upgrade` and `Connection` headers so that WebSocket connections can be established. Each proxy example below already includes the directives needed to do this, but if you are adapting your own configuration, ensure these headers are passed through.
+
+Note that some proxies disable WebSocket support by default — for example, Nginx Proxy Manager has a "Websockets Support" toggle that must be enabled.
+
 ## Proxies
 
 There are many solutions available to implement reverse proxies and the community is invited to help out documenting others through a contribution to this page.
 
-* [Apache2](#apache2-reverse-proxy)
-* [Nginx](#nginx-reverse-proxy)
-* [Traefik](#traefik-reverse-proxy)
-* [Caddy](#caddy-reverse-proxy)
+- [Apache2](#apache2-reverse-proxy)
+- [Nginx](#nginx-reverse-proxy)
+- [Traefik](#traefik-reverse-proxy)
+- [Caddy](#caddy-reverse-proxy)
 
 ## Apache2 Reverse Proxy
 
@@ -159,7 +168,7 @@ The settings below enabled connection upgrade, sets up logging (optional) and pr
 
 ## Traefik Reverse Proxy
 
-This example shows how to add a `label` to the Frigate Docker compose file, enabling Traefik to automatically discover your Frigate instance.  
+This example shows how to add a `label` to the Frigate Docker compose file, enabling Traefik to automatically discover your Frigate instance.
 Before using the example below, you must first set up Traefik with the [Docker provider](https://doc.traefik.io/traefik/providers/docker/)
 
 ```yml
@@ -203,7 +212,7 @@ This example shows Frigate running under a subdomain with logging and a tls cert
 }
 
 frigate.YOUR_DOMAIN.TLD {
-        reverse_proxy http://localhost:8971 
+        reverse_proxy http://localhost:8971
         import tls
         import logging frigate.YOUR_DOMAIN.TLD
 }

frigate/api/auth.py

@@ -12,6 +12,7 @@ import time
 from datetime import datetime
 from pathlib import Path
 from typing import List, Optional
+from urllib.parse import parse_qs, urlparse
 
 from fastapi import APIRouter, Depends, HTTPException, Request, Response
 from fastapi.responses import JSONResponse, RedirectResponse
@@ -26,7 +27,11 @@ from frigate.api.defs.request.app_body import (
     AppPutRoleBody,
 )
 from frigate.api.defs.tags import Tags
-from frigate.api.media_auth import check_camera_access, deny_response_for_media_uri
+from frigate.api.media_auth import (
+    check_camera_access,
+    deny_response_for_media_uri,
+    is_role_restricted,
+)
 from frigate.config import AuthConfig, NetworkingConfig, ProxyConfig
 from frigate.const import CONFIG_DIR, JWT_SECRET_ENV_VAR, PASSWORD_HASH_ALGORITHM
 from frigate.models import User
@@ -658,6 +663,10 @@ def auth(request: Request):
         if deny_status is not None:
             return Response("", status_code=deny_status)
 
+        deny_status = deny_response_for_go2rtc_stream(original_url, role, request)
+        if deny_status is not None:
+            return Response("", status_code=deny_status)
+
         return success_response
 
     # now apply authentication
@@ -757,6 +766,10 @@ def auth(request: Request):
         if deny_status is not None:
             return Response("", status_code=deny_status)
 
+        deny_status = deny_response_for_go2rtc_stream(original_url, role, request)
+        if deny_status is not None:
+            return Response("", status_code=deny_status)
+
         return success_response
     except Exception as e:
         logger.error(f"Error parsing jwt: {e}")
@@ -1112,6 +1125,66 @@ def _get_stream_owner_cameras(request: Request, stream_name: str) -> set[str]:
     return owner_cameras
 
 
+# nginx proxies these paths straight to go2rtc with authentication-only checks
+# (see auth_request.conf). Each names the desired stream via the `src` query
+# param, so the camera-level check must happen here in the `/auth` subrequest —
+# `require_go2rtc_stream_access` only guards the REST `/go2rtc/streams/{name}`
+# endpoint, not these proxied live-stream paths.
+GO2RTC_STREAM_PROXY_PATHS = frozenset(
+    {
+        "/live/mse/api/ws",
+        "/live/webrtc/api/ws",
+        "/api/go2rtc/webrtc",
+    }
+)
+
+
+def deny_response_for_go2rtc_stream(
+    original_url: Optional[str], role: Optional[str], request: Request
+) -> Optional[int]:
+    """Block role-restricted users from go2rtc live streams they cannot access.
+
+    Returns 403 when any `src` stream named in `original_url` resolves to a
+    camera outside the role's allow-list (or when no `src` is provided on a
+    stream-proxy path), otherwise None. Mirrors the resolution logic in
+    `require_go2rtc_stream_access` so substream names map to their owning
+    camera correctly.
+    """
+    if not original_url:
+        return None
+
+    parsed = urlparse(original_url)
+    if parsed.path not in GO2RTC_STREAM_PROXY_PATHS:
+        return None
+
+    frigate_config = request.app.frigate_config
+
+    # admin and full-access roles (no allow-list) bypass the camera check
+    if not role or not is_role_restricted(role, frigate_config):
+        return None
+
+    sources = parse_qs(parsed.query).get("src", [])
+    if not sources:
+        # a stream-proxy request naming no stream has nothing legitimate to
+        # show a restricted user
+        return 403
+
+    allowed_cameras = set(
+        User.get_allowed_cameras(
+            role,
+            frigate_config.auth.roles,
+            set(frigate_config.cameras.keys()),
+        )
+    )
+
+    # deny if any requested source resolves outside the allow-list
+    for src in sources:
+        if not (_get_stream_owner_cameras(request, src) & allowed_cameras):
+            return 403
+
+    return None
+
+
 async def require_go2rtc_stream_access(
     stream_name: Optional[str] = None,
     request: Request = None,

frigate/test/test_go2rtc_stream_auth.py

@@ -0,0 +1,175 @@
+"""Unit tests for `deny_response_for_go2rtc_stream`.
+
+Covers the camera-level authorization enforced in the `/auth` subrequest for
+the nginx-proxied go2rtc live-stream paths (MSE/WebRTC WebSockets and the
+WebRTC signaling endpoint). These paths name the stream via the `src` query
+param, which the static-media auth in `media_auth` does not inspect.
+"""
+
+import types
+import unittest
+
+from frigate.api.auth import deny_response_for_go2rtc_stream
+from frigate.config import FrigateConfig
+
+_CONFIG = {
+    "mqtt": {"host": "mqtt"},
+    "auth": {
+        "roles": {
+            "limited_user": ["front_door"],
+            "dual_user": ["front_door", "back_door"],
+        }
+    },
+    "cameras": {
+        "front_door": {
+            "ffmpeg": {
+                "inputs": [{"path": "rtsp://10.0.0.1:554/video", "roles": ["detect"]}]
+            },
+            "detect": {"height": 1080, "width": 1920, "fps": 5},
+            # go2rtc stream name differs from the camera name (substream)
+            "live": {"streams": {"Main Stream": "front_door_sub"}},
+        },
+        "back_door": {
+            "ffmpeg": {
+                "inputs": [{"path": "rtsp://10.0.0.2:554/video", "roles": ["detect"]}]
+            },
+            "detect": {"height": 1080, "width": 1920, "fps": 5},
+        },
+        "garage": {
+            "ffmpeg": {
+                "inputs": [{"path": "rtsp://10.0.0.3:554/video", "roles": ["detect"]}]
+            },
+            "detect": {"height": 1080, "width": 1920, "fps": 5},
+        },
+    },
+}
+
+
+def _request(config: FrigateConfig) -> types.SimpleNamespace:
+    return types.SimpleNamespace(app=types.SimpleNamespace(frigate_config=config))
+
+
+class TestDenyResponseForGo2rtcStream(unittest.TestCase):
+    def setUp(self) -> None:
+        self.config = FrigateConfig(**_CONFIG)
+        self.request = _request(self.config)
+
+    def _deny(self, url: str, role: str):
+        return deny_response_for_go2rtc_stream(url, role, self.request)
+
+    # --- non-stream paths pass through ---
+
+    def test_non_stream_path_passes_through(self):
+        self.assertIsNone(
+            self._deny("http://host/clips/back_door-1.jpg", "limited_user")
+        )
+
+    def test_empty_url_passes_through(self):
+        self.assertIsNone(self._deny("", "limited_user"))
+
+    def test_jsmpeg_path_not_handled_here(self):
+        # jsmpeg is authorized per-frame in the output pipeline, not here
+        self.assertIsNone(
+            self._deny("http://host/live/jsmpeg/back_door", "limited_user")
+        )
+
+    # --- restricted role: allowed vs forbidden cameras ---
+
+    def test_mse_allowed_camera(self):
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=front_door", "limited_user")
+        )
+
+    def test_mse_forbidden_camera_denied(self):
+        self.assertEqual(
+            self._deny("http://host/live/mse/api/ws?src=back_door", "limited_user"),
+            403,
+        )
+
+    def test_webrtc_ws_forbidden_camera_denied(self):
+        self.assertEqual(
+            self._deny("http://host/live/webrtc/api/ws?src=back_door", "limited_user"),
+            403,
+        )
+
+    def test_webrtc_signaling_forbidden_camera_denied(self):
+        self.assertEqual(
+            self._deny("http://host/api/go2rtc/webrtc?src=back_door", "limited_user"),
+            403,
+        )
+
+    def test_unknown_camera_denied(self):
+        self.assertEqual(
+            self._deny("http://host/live/mse/api/ws?src=nonexistent", "limited_user"),
+            403,
+        )
+
+    def test_missing_src_denied(self):
+        self.assertEqual(self._deny("http://host/live/mse/api/ws", "limited_user"), 403)
+
+    # --- multi-camera role: each assigned camera allowed, others denied ---
+
+    def test_multi_camera_role_allows_first_assigned(self):
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=front_door", "dual_user")
+        )
+
+    def test_multi_camera_role_allows_second_assigned(self):
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=back_door", "dual_user")
+        )
+
+    def test_multi_camera_role_denies_unassigned(self):
+        # garage is configured but not in dual_user's allow-list
+        self.assertEqual(
+            self._deny("http://host/live/mse/api/ws?src=garage", "dual_user"),
+            403,
+        )
+
+    # --- substream names resolve to their owning camera ---
+
+    def test_allowed_substream_resolves_to_owning_camera(self):
+        # front_door_sub is owned by front_door, which limited_user may access
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=front_door_sub", "limited_user")
+        )
+
+    # --- multiple src values: deny if any is forbidden ---
+
+    def test_multiple_src_one_forbidden_denied(self):
+        self.assertEqual(
+            self._deny(
+                "http://host/live/mse/api/ws?src=front_door&src=back_door",
+                "limited_user",
+            ),
+            403,
+        )
+
+    def test_multiple_src_all_allowed(self):
+        self.assertIsNone(
+            self._deny(
+                "http://host/live/mse/api/ws?src=front_door&src=front_door_sub",
+                "limited_user",
+            )
+        )
+
+    # --- privileged roles bypass the check ---
+
+    def test_admin_bypasses(self):
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=back_door", "admin")
+        )
+
+    def test_builtin_viewer_role_bypasses(self):
+        # the built-in viewer role is not in the config allow-list map, so it
+        # is treated as full access
+        self.assertIsNone(
+            self._deny("http://host/live/mse/api/ws?src=back_door", "viewer")
+        )
+
+    def test_missing_role_bypasses(self):
+        self.assertIsNone(self._deny("http://host/live/mse/api/ws?src=back_door", None))
+
+
+if __name__ == "__main__":
+    unittest.main()

web/src/components/config-form/sectionExtras/CameraReviewClassification.tsx

@@ -243,12 +243,7 @@ export default function CameraReviewClassification({
                         handleZoneToggle("alerts.required_zones", zone.name)
                       }
                     />
-                    <Label
-                      className={cn(
-                        "font-normal",
-                        !zone.friendly_name && "smart-capitalize",
-                      )}
-                    >
+                    <Label className="font-normal">
                       {zone.friendly_name || zone.name}
                     </Label>
                   </div>

web/src/components/config-form/theme/widgets/ZoneSwitchesWidget.tsx

@@ -29,8 +29,8 @@ function getZoneDisplayName(zoneName: string, context?: FormContext): string {
       }
     }
   }
-  // Fallback to cleaning up the zone name
-  return String(zoneName).replace(/_/g, " ");
+  // Fallback to the raw zone id verbatim (no friendly_name available)
+  return String(zoneName);
 }
 
 export function ZoneSwitchesWidget(props: WidgetProps) {

web/src/components/overlay/detail/TrackingDetails.tsx

@@ -1197,14 +1197,7 @@ function LifecycleIconRow({
                           backgroundColor: `rgb(${color})`,
                         }}
                       />
-                      <span
-                        className={cn(
-                          item.data?.zones_friendly_names?.[zidx] === zone &&
-                            "smart-capitalize",
-                        )}
-                      >
-                        {item.data?.zones_friendly_names?.[zidx]}
-                      </span>
+                      <span>{item.data?.zones_friendly_names?.[zidx]}</span>
                     </Badge>
                   );
                 })}

web/src/hooks/use-zone-friendly-name.ts

@@ -7,12 +7,12 @@ export function resolveZoneName(
   zoneId: string,
   cameraId?: string,
 ) {
-  if (!config) return String(zoneId).replace(/_/g, " ");
+  if (!config) return String(zoneId);
 
   if (cameraId) {
     const camera = config.cameras?.[String(cameraId)];
     const zone = camera?.zones?.[zoneId];
-    return zone?.friendly_name || String(zoneId).replace(/_/g, " ");
+    return zone?.friendly_name || String(zoneId);
   }
 
   for (const camKey in config.cameras) {
@@ -21,12 +21,12 @@ export function resolveZoneName(
     if (!cam?.zones) continue;
     if (Object.prototype.hasOwnProperty.call(cam.zones, zoneId)) {
       const zone = cam.zones[zoneId];
-      return zone?.friendly_name || String(zoneId).replace(/_/g, " ");
+      return zone?.friendly_name || String(zoneId);
     }
   }
 
-  // Fallback: return a cleaned-up zoneId string
-  return String(zoneId).replace(/_/g, " ");
+  // Fallback: display the raw zone id verbatim (no friendly_name available)
+  return String(zoneId);
 }
 
 export function useZoneFriendlyName(zoneId: string, cameraId?: string): string {