13 Commits

Include renames

Author	SHA1	Message	Date
Josh HawkinsandGitHub	9b0aa75312	Add configurable notification TTL (#24829) ... * add configurable ttl for active alert notifications Notifications sent while an alert was active always used a TTL of 0, so the push service dropped them if the device wasn't reachable at that moment and users only received the notification sent when the alert ended. A new `ttl` notifications option, settable globally or per camera, lets the push service retry these notifications for that many seconds. It defaults to 0, and the settings UI warns that a non-zero value can deliver stale notifications. * make notification ttl a global advanced setting - Read `ttl` from the global notifications config and hide it on the camera form - Show it under Advanced Settings on the Notifications page - Remove extra padding that misaligned the Notifications cards with the rest of the form - Shorten the ttl warning * tweaks * use enum instead of raw seconds value	2026-10-30 12:52:22 -06:00
Josh HawkinsandGitHub	c177849f57	Tweaks (#24684) ... * bound recording snapshot lookups by segment length Ordering the recording snapshot and Frigate+ lookups by stream_type ahead of start_time broke index order, so SQLite fetched and sorted every older recording for the camera on each request (about 100 ms on a 30 day camera, run on the event loop). A start_time lower bound of the frame time minus MAX_SEGMENT_DURATION keeps the lookup to a few rows. * bound recording overlap queries by segment length Clip, export, review and recording deletion, debug replay, motion search, and audio transcription found overlapping recordings with an OR clause that gave SQLite no start_time range, so every call read the camera's whole recording history (30 to 300 ms on a 30 day database). The classification and review description point lookups did the same whenever the timestamp had no recording. A shared recording_overlap helper now adds a start_time lower bound of MAX_SEGMENT_DURATION before the range, which drops no rows because segments are always shorter than that. * probe webrtc before reporting it as not configured The WebRTC gate read only the Frigate config, so an install with no go2rtc candidates showed WebRTC as not configured, even though go2rtc fills in default candidates at startup (including the internal one under the HA app) and WebRTC often worked. Unset candidates now run the connectivity probe first, and only a failed probe reports not configured. The not-configured reason shows as a neutral note that names the setting and says WebRTC is optional, rather than as a red error. * validate trusted_proxies at config load Malformed trusted_proxies entries were only parsed per request in get_remote_addr, so a typo logged a warning on every proxied request and the entry was skipped, collapsing all clients behind that proxy into one rate-limit bucket. The config now rejects unparseable entries at startup and get_remote_addr no longer needs the fallback. Host bits are accepted (192.168.1.1/24 reads as 192.168.1.0/24) so a common typo doesn't take down safe mode, which copies the auth section verbatim. * remove path data from thumbnail payloads The thumbnail data carried a full copy of the object's path, which went out as snapshot.path_data in every events message alongside the top level path_data. Nothing reads the snapshot copy, and the path has no length limit, so it only made events payloads larger. * hide incompatible frigate+ models behind a toggle * keep the probe failure detail in the not-configured console message * use a unique id for each show incompatible models toggle * pad the bottom of the desktop timeline so zoom buttons don't cover segments * create the admin row when auth is disabled so notification registrations persist Installs that never enabled auth had no admin row, so registering for notifications returned 200 but saved nothing. Frigate now creates an admin row with an empty password hash when auth is disabled, and treats that empty hash as first-time setup when auth is enabled later so a password is still generated and printed. Registration returns 404 when no user row was updated, and the success toast only shows after the request succeeds. The Users settings page hides Add User and Reset Password when auth is disabled and notes that accounts only apply once built-in auth is enabled.	2026-10-16 13:49:16 -06:00
Josh HawkinsandGitHub	24a236a152	Miscellaneous fixes (#24528) ... * revert disable save buttons when there are no changes in config editor * pass migrated config to each step in the config migration chain * use 150 as the default max when typing a min speed in the search filter * fix preview export outpoint to be relative to the start of the preview file * don't crash on invalid trusted proxy entries or non-ip forwarded hops * translate the camera count badge in the roles table * run every batch through the lpr recognition model * log rejected motion and notification mqtt payloads * log invalid addresses in x-forwarded-for * add test * remove unused autotracked_object_region * remove unreachable autotracker setup call in camera maintenance * apply onvif retry limit when initialization fails * fix reindex progress overcounting when there are fewer events than a batch * match the register device button aria label to its text * reset the add profile form on cancel * ignore case when filtering search suggestions * tweak comment	2026-10-01 07:19:31 -06:00
Josh HawkinsandGitHub	52f50a7396	Tweaks (#24418) ... * don't display audio transcription provider message as health notice * show remote provider for audio transcription in health pane * adjust trigger and notifications messages to be consistent with the rest of the settings UI * disable save buttons when there are no changes in config editor * fix audio manager crash when a camera is added at runtime The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update. `AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors. * fix stationary max_frames dropping other tracked objects When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update. * fix test * fix skip_motion_threshold permanently disabling motion detection The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating. Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back. * dump ffmpeg logs on every restart The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`. * dump ffmpeg logs once per restart The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section. * keep all logpipe dumps consistent	2026-09-20 12:45:24 -06:00
Josh HawkinsandGitHub	79ca18d439	fix build warnings from tailwind, fonts, and fast refresh (#24359) ... fix duplicated styles, move fonts to src/assets/fonts for vite to bundle (nginx already rewrites correctly), and fix fast refresh for PreviewController, auth context/provider, and statusbar context	2026-09-15 15:33:09 -06:00
Josh HawkinsandGitHub	cabdffea20	Update more web deps and reformat with updated prettier (#24358) ... * update date-fns, i18next, react-dropzone, react-markdown and @types/node react-i18next 17 peers `i18next >= 26.2.0`, so the two move together. react-day-picker already depends on date-fns 4, so date-fns now dedupes to a single copy. react-dropzone 20 declares `node >=22` in `engines`, but npm only warns on Node 20 and nothing in the build needs Node 22. * update js-yaml, @hookform/resolvers and prettier js-yaml 5 has no default export, so `DictAsYamlField` imports `dump`, `load` and `YAMLException` by name. @hookform/resolvers 5 types `zodResolver` with the schema's input and output types separately, and fields with defaults are optional on input, so the zone and classification model forms pass both types to `useForm`. zod's range now starts at 3.25, which resolvers 5 requires. * format with prettier 3.9	2026-09-15 15:18:49 -06:00
Josh HawkinsandGitHub	812e5308a3	fix notification suspend state lost on page reload (#23989) ... <camera>/notifications/suspended arrives as a string over the live connection but as a number in the camera_activity snapshot, and the truthiness guard dropped the numeric 0, so a camera with notifications off rendered as active after a reload. Normalize to a string and derive isSuspended instead of storing it.	2026-08-13 16:51:44 -06:00
Josh HawkinsandGitHub	47a06c8b30	Tweaks (#23367) ... * add ptz presets and default role widgets * language tweaks * fix width in triggers view * tweak iOS PWA message in notifications settings * deprecate ui.date_style and ui.time_style these have been unused since date/time formatting has been pushed to i18n * add config migrator to remove date_style and time_style * remove date_style and time_style from reference config * fix camera list scrolling in state classification wizard on mobile	2026-05-31 15:09:10 -06:00
Josh HawkinsandGitHub	6fdd65ddb5	UI tweaks (#23346) ... * remove redundant per-view toasters in settings * add variants to standardize dialog footer button layouts * remove text-md this class name compiles to nothing in tailwind. we used to add it to prevent iOS from zooming when focusing on an input, but that is now solved via the viewport meta in index.html * make wizard footers consistent with dialog footers * consistent destructive button style remove text-white from individual buttons and add it to the variant	2026-05-29 16:00:30 -06:00
Josh HawkinsandGitHub	555ef89800	Debug replay fixes (#23276) ... * filter replay camera from camera selectors * add face rec and lpr to replay configuration sheet * add missing config topic subscriptions in embeddings maintainer * pop replay camera from config object when stopping	2026-05-21 08:12:53 -06:00
Josh HawkinsandGitHub	257dae11c1	Fix browser time format handling (#22694) ... * implement hook to return resolved "24hour" | "12hour" string delegate to existing use24HourTime(), which correctly detects the browser's locale preference via Intl.DateTimeFormat * update frontend to use use24HourTime(config) or useTimeFormat(config) instead of directly comparing config.ui.time_format	2026-03-29 13:03:07 -06:00
Nicolas MowenandGitHub	d27ee166bc	Notification Fixes (#22599) ... * Fix iOS having notification token revoked * Try to handle iOS stacked notifications * Fix typo * Improve updating of notification script	2026-03-24 06:30:48 -05:00
Josh HawkinsandGitHub	e7250f24cb	Full UI configuration (#22151) ... * use react-jsonschema-form for UI config * don't use properties wrapper when generating config i18n json * configure for full i18n support * section fields * add descriptions to all fields for i18n * motion i18n * fix nullable fields * sanitize internal fields * add switches widgets and use friendly names * fix nullable schema entries * ensure update_topic is added to api calls this needs further backend implementation to work correctly * add global sections, camera config overrides, and reset button * i18n * add reset logic to global config view * tweaks * fix sections and live validation * fix validation for schema objects that can be null * generic and custom per-field validation * improve generic error validation messages * remove show advanced fields switch * tweaks * use shadcn theme * fix array field template * i18n tweaks * remove collapsible around root section * deep merge schema for advanced fields * add array field item template and fix ffmpeg section * add missing i18n keys * tweaks * comment out api call for testing * add config groups as a separate i18n namespace * add descriptions to all pydantic fields * make titles more concise * new titles as i18n * update i18n config generation script to use json schema * tweaks * tweaks * rebase * clean up * form tweaks * add wildcards and fix object filter fields * add field template for additionalproperties schema objects * improve typing * add section description from schema and clarify global vs camera level descriptions * separate and consolidate global and camera i18n namespaces * clean up now obsolete namespaces * tweaks * refactor sections and overrides * add ability to render components before and after fields * fix titles * chore(sections): remove legacy single-section components replaced by template * refactor configs to use individual files with a template * fix review description * apply hidden fields after ui schema * move util * remove unused i18n * clean up error messages * fix fast refresh * add custom validation and use it for ffmpeg input roles * update nav tree * remove unused * re-add override and modified indicators * mark pending changes and add confirmation dialog for resets * fix red unsaved dot * tweaks * add docs links, readonly keys, and restart required per field * add special case and comments for global motion section * add section form special cases * combine review sections * tweaks * add audio labels endpoint * add audio label switches and input to filter list * fix type * remove key from config when resetting to default/global * don't show description for new key/val fields * tweaks * spacing tweaks * add activity indicator and scrollbar tweaks * add docs to filter fields * wording changes * fix global ffmpeg section * add review classification zones to review form * add backend endpoint and frontend widget for ffmpeg presets and manual args * improve wording * hide descriptions for additional properties arrays * add warning log about incorrectly nested model config * spacing and language tweaks * fix i18n keys * networking section docs and description * small wording tweaks * add layout grid field * refactor with shared utilities * field order * add individual detectors to schema add detector titles and descriptions (docstrings in pydantic are used for descriptions) and add i18n keys to globals * clean up detectors section and i18n * don't save model config back to yaml when saving detectors * add full detectors config to api model dump works around the way we use detector plugins so we can have the full detector config for the frontend * add restart button to toast when restart is required * add ui option to remove inner cards * fix buttons * section tweaks * don't zoom into text on mobile * make buttons sticky at bottom of sections * small tweaks * highlight label of changed fields * add null to enum list when unwrapping * refactor to shared utils and add save all button * add undo all button * add RJSF to dictionary * consolidate utils * preserve form data when changing cameras * add mono fonts * add popover to show what fields will be saved * fix mobile menu not re-rendering with unsaved dots * tweaks * fix logger and env vars config section saving use escaped periods in keys to retain them in the config file (eg "frigate.embeddings") * add timezone widget * role map field with validation * fix validation for model section * add another hidden field * add footer message for required restart * use rjsf for notifications view * fix config saving * add replace rules field * default column layout and add field sizing * clean up field template * refactor profile settings to match rjsf forms * tweaks * refactor frigate+ view and make tweaks to sections * show frigate+ model info in detection model settings when using a frigate+ model * update restartRequired for all fields * fix restart fields * tweaks and add ability enable disabled cameras more backend changes required * require restart when enabling camera that is disabled in config * disable save when form is invalid * refactor ffmpeg section for readability * change label * clean up camera inputs fields * misc tweaks to ffmpeg section - add raw paths endpoint to ensure credentials get saved - restart required tooltip * maintenance settings tweaks * don't mutate with lodash * fix description re-rendering for nullable object fields * hide reindex field * update rjsf * add frigate+ description to settings pane * disable save all when any section is invalid * show translated field name in validation error pane * clean up * remove unused * fix genai merge * fix genai	2026-02-27 08:55:36 -07:00