* start audio transcription post processor when enabled on any camera
* Fetch embed key whenever an error occurs in case the llama server was restarted
* mypy
* add tooltips for colored dots in settings menu
* add ability to reorder cameras from management pane
* add ability to reorder birdseye
* add reordering save text to camera management view
* Include NPU in latency performance hint
* Implement turbo for NPU on object detection
* hide order fields
* drop auto-derived field paths from camera value when unset globally
* use correct field type for export hwaccel args
* add debug replay to detail actions menu
* clarify debug replay in docs
* guard get_current_frame_time against missing camera state
* Implement debug reply from export
* Refactor debug replay to use sources for dynamic playback
* Mypy
* fix debug export replay source timestamp handling
* skip replay cameras in stats immediately
* broadcast debug replay state over ws and buffer pre-OPEN sends
- push debug replay session state over the job_state ws topic so the status bar reacts instantly to start/stop without polling
- fix child-effect-before-parent-effect race in WsProvider that silently dropped initial snapshot requests on cold load
* fix debug replay test hang
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* detector UI fixes
- derive detector and model from memo rather than using two drain useeffects
- sanitize save payload through sanitizeSectionData to prevent yaml validation issues
* increase display duration for restart required toasts
* mimic logic in detector section for save all button
also, increase toast duration for restart required toasts
* fixes and tweaks
- use section hidden fields for sanitization instead of duplicating code
- use parent hooks so save all, pending data, and the status dots work correctly
* add embedded mode to BaseSection so parents can host the save action
* add optional action slot to current Frigate+ model summary
* add w-full to action slot flex wrapper for explicit width contract
* i18n
* merged detectors and model settings view
* fix document title
* Embed detector form in merged settings view
* add detection model card with tabs and custom model embed
* add Frigate+ model selector with filter popover to merged page
* Add mismatch banner and gate save on detector and model compatibility
* Wire atomic save, restart toast, and undo on detectors and model page
* Clear child pending data on undo
* route merged detectors and model view in settings
* trim Frigate+ page to account-only and remove old detection model view
* basic e2e
* Fix unsaved-changes guard, custom path leak, and post-failure cache resync
* Rename to Detectors and model, float Modified badge, use ConfigMessageBanner for mismatch
* Hide Plus/Custom tabs when Frigate+ is not enabled
* Detect active Plus model via model.plus.id instead of path prefix
* Sync state back to snapshot when child form un-modifies and remount on undo
* Always require restart on save since model changes also need one
* Wrap Frigate+ model selector in SplitCardRow with label and description
* rename tab
* update docs
* sync top-level model with default detector's resolved model
when the user doesn't define a top-level `model:` block, `FrigateConfig.model` stayed at pydantic field defaults (320×320, /labelmap.txt) while the per-detector model picked up `DEFAULT_MODEL` for openvino on cpu (300×300, coco_91cl_bkgr.txt introduced in #23127), causing `RemoteObjectDetector` to fail with "buffer is too small for requested array" because the SHM was sized from the per-detector model but mapped using the top-level one. After the detector loop, copy the first detector's resolved model up to `self.model` so both sides agree on dimensions and labelmap
* revert to cpu detector by default
use openvino cpu for new configs only
* add defaults
* sync filter entries with track and listen labels
- Auto-populate `audio.filters` from `audio.listen` instead of the full audio labelmap, matching how `objects.filters` is keyed by `track` (no longer need to populate the full audio labelmap, which was added in #22630)
- Synthesize the matching filter entries in the settings form on load so each track/listen label shows its collapsible after a profile is selected, since the backend's auto-populate only runs at config init
* translate main label for lifecycle description with attribute
* reject restricted go2rtc stream sources when added via api
* add env var check function
* improve scroll handling for non-modal DropdownMenu in classification and face selection dialogs
* clean up
* fix incorrect key capitalization
* fix profile array overrides not replacing base arrays
don't use lodash merge(), it does positional merging and an empty source array doesn't override the destination, and shorter arrays leak destination elements through.
backend is unaffected, so the saved config and actual backend functionality was right
* only show audio debug tab when audio is enabled in config
* move apple_compatibility out of advanced
* remove retry_interval from UI
99% of users should never be changing this
* hide switch in optionalfieldwidget if editing a profile
* add override badges for cameras and profiles
collect shared functions into the config util and separate hooks
* Use new models endpoint info to determine modalities
* clarify language
* fix linter
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Change order
* Improve title
* add loading spinner to exports
* Simplify JSON since not all providers see or use this the same
* Add fields to primary prompt
* Adjust centering for no overrides
* Use GenAI title for exports when available
* detect form-root objects by field path instead of schema identity
* add bosnian
* Strip v1 if included in url
* prevent fast clicks in video controls from selecting text
* Use title for metadata chapters
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* respect section hiddenFields when detecting config overrides
* change audio events to audio detection to match docs
* add field messages for object and review genai
* add more config messages
* more messages
* add guard to prevent race when adding camera dynamically
* fix duplicate websocket messages from zombie connection under react strict mode
detach ws event handlers before close() in WsProvider cleanup so a CONNECTING socket's deferred onclose can't schedule a reconnect after the next mount resets the unmounted guard, which was spawning a second live ws and duplicating every message
* fix double event publishes for stationary objects with attributes
* hide camera overrides badge from system sections
* show empty card on camera metrics page when no cameras are defined
* fix enabled camera state switch after adding via wizard
Cameras added mid-session have no WS state until the dispatcher publishes camera_activity (which only happens on a fresh onConnect). Fall back to the config's enabled value so the switch reflects reality immediately after the wizard closes.
* guard camera enabled access
console would throw errors after adding via camera wizard
* fix useOptimisticState dropping debounced setState under StrictMode
* use openvino on cpu as default model
- faster than tflite on cpu
- add to default generated config
* use an enum for model_size
the frontend will then render this as a select dropdown because of the changes in the json schema
* i18n
* sync object filter entries with tracked labels in camera config form
Filter sub-collapsibles in the camera Objects section are driven by `filters` dict keys, but profile merges and live track-switch edits don't add matching entries, so newly tracked labels (like from a profile override) had no collapsible. Synthesize default filter entries from `track` in the form data so every tracked label renders a collapsible; baseline data also gets the synthesized entries, so save payloads are unchanged.
* revalidate raw paths cache after config save so CameraPathWidget shows fresh credentials
* fix test
* restore masked ffmpeg credentials when persisting camera config
* formatting
* rebuild ffmpeg commands when enabling recording for the first time
Toggling record.enabled from the config UI updated the in-memory config but left ffmpeg running with its original command, so the record output args were never wired in and nothing landed in the cache for the maintainer to move. The record config update now rebuilds ffmpeg_cmds when enabled_in_config transitions, and the camera watchdog restarts ffmpeg on a false to true transition so the record output gets wired in. MQTT toggles, which only flip record.enabled at runtime, are unaffected and continue to work via the maintainer's drop/keep gate.
* keep record toggle switch in single camera view disabled until enabled in config
* fix override detection for sections unset in the global config
Override badges and the blue dot now compare against schema defaults for sections like motion that the API serializes as null when omitted from the global YAML, instead of treating any populated camera config as an override
* add support for config-aware patterns in section hiddenFields
Section configs can now declare dynamic hidden-field entries as functions of the loaded config; objects.ts uses this to hide auto-populated attribute filters (DHL, face, license_plate, etc.) from the form, save flow, and override popover when those labels aren't user-settable
* siimplify object filters handling
live updating was getting very messy. users will just need to save once they enable a new object in order to see filters for that object
* tweaks
* update docs for new detector default
* make genai provider required and add special case for UI
prevent validation errors from appearing on initial creation of genai provider by setting the first option in the select dropdown as default
* use continuous expire date when loading reviews for recording cleanup
* reset heatmap filter when motion preview camera changes
* Add note about speed zones unit when enabled
* don't display fps warning for dedicated LPR cameras
* language tweaks
* allow changing camera type from management UI
* i18n
* fix ollama tool calling failure when conversation contains multimodal content from live frame tool results
* fix mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Reduce max frames per second to 1
* Use pydantic but don't fail if some constraints are not met.
* Adjust limits
* Adjust limits
* Cleanup
* add unsaved changes icon/popover to individual settings section
* allow changing camera friendly_name from camera management pane
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* use ffmpeg to probe rtsp urls instead of cv2
cv2 is faster (no subprocess launch) and will continue to be used for recording segments
* tweak faq
* change unsaved color to orange
avoids confusion with validation errors (red)
* don't use any variant of orange as a profile color
avoids confusion with unsaved changes
* more unsaved color tweaks
* apply annotation offset to frigate+ submission frame time
* fix broken docs links with hash fragments that resolve wrong on reload
* undo
* use recording snapshot for frigate+ frame submission from VideoControls
rather than a canvas grab/paint, which may not always align with an ffmpeg snapshot due to keyframes
* add more docs links
- display docs link for main sections on collapsible fields
* dialog button consistency
* backend
* frontend + i18n
* tests + api spec
* tweak backend to use Job infrastructure for exports
* frontend tweaks and Job infrastructure
* tests
* tweaks
- add ability to remove from case
- change location of counts in case card
* add stale export reaper on startup
* fix toaster close button color
* improve add dialog
* formatting
* hide max_concurrent from camera config export settings
* remove border
* refactor batch endpoint for multiple review items
* frontend
* tests and fastapi spec
* fix deletion of in-progress exports in a case
* tweaks
- hide cases when filtering cameras that have no exports from those cameras
- remove description from case card
- use textarea instead of input for case description in add new case dialog
* add auth exceptions for exports
* add e2e test for deleting cases with exports
* refactor delete and case endpoints
allow bulk deleting and reassigning
* frontend
- bulk selection like Review
- gate admin-only actions
- consolidate dialogs
- spacing/padding tweaks
* i18n and tests
* update openapi spec
* tweaks
- add None to case selection list
- allow new case creation from single cam export dialog
* fix codeql
* fix i18n
* remove unused
* fix frontend tests
* fix mobile export crash by removing stale iOS non-modal drawer workaround
* Remove titlecase to avoid Gemma4 handling plain labels as proper nouns
* Improve titling:
* Make directions more clear
* Properly capitalize delivery services
* update dispatcher config reference on save
* subscribe to review topic so ReviewDescriptionProcessor knows genai is enabled
* auto-send ON genai review WS message when enabled_in_config transitions to true
* remove unused object level
* update docs to clarify pre/post capture settings
* add ui docs links
* improve known_plates field in settings UI
* only show save all when multiple sections are changed
or if the section being changed is not currently being viewed
* fix docs
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* refresh model dropdown after changing provider or base url
* decouple list_models from provider init
switching providers in the UI left an invalid model in the config, then _init_provider would fail and list_models would return an empty list, making it impossible to select a valid model
* add DictAsYamlField for genai provider and runtime options
* regenerate config translations
* chat tweaks
- add page title
- scroll if near bottom
- add tool call group that dynamically updates as tool calls are made
- add bouncing loading indicator and other UI polish
* tool call grouping
* Switch to a feature-based roles so it is easier to choose models for different tasks
* Fallback and try llama-swap format
* List models supported by provider
* Cleanup
* Add frontend
* Improve model loading
* Make it possible to update genai without restarting
* Cleanup
* Cleanup
* Mypy
* add ability to order subfields with dot notation
* put review genai enabled at the top of the genai subsection
* fix genai summary title truncation issue in detail stream
* set edgetpu for multi-instance
* improve error messages when mixing/matching detectors
* allow custom add button text via uiSchema
* clarify language in docs for configuring detectors via the UI
* add config messages to sections and fields
* add alert variants
* add messages to types
* add detect fps, review, and audio messages
* add a basic set of messages
* remove emptySelectionHintKey from switches widget
use the new messages framework and revert the changes made in #22664
* implement hook to return resolved "24hour" | "12hour" string
delegate to existing use24HourTime(), which correctly detects the browser's locale preference via Intl.DateTimeFormat
* update frontend to use use24HourTime(config) or useTimeFormat(config) instead of directly comparing config.ui.time_format
* add review labels widget
* register widget and add to review section
* i18n
* add border to switches widget
* padding tweaks
* don't show audio labels if audio is not enabled
* add docs links
* ability to add custom labels to review
* add hint for empty selection in review labels and SwitchesWidget
* language consistency
* tweak language
* show validation errors in json response
* fix export hwaccel args field in UI
* increase annotation offset consts
* fix save button race conditions, add reset spinner, and fix enrichments profile leak
- Disable both Save and SaveAll buttons while either operation is in progress so users cannot trigger concurrent saves
- Show activity indicator on Reset to Default/Global button during the API call
- Enrichments panes (semantic search, genai, face recognition) now always show base config fields regardless of profile selection in the header dropdown
* fix genai additional_concerns validation error with textarea array widget
The additional_concerns field is list[str] in the backend but was using the textarea widget which produces a string value, causing validation errors.
Created a TextareaArrayWidget that converts between array (one item per line) and textarea display, and switched additional_concerns to use it
* populate and sort global audio filters for all audio labels
* add column labels in profiles view
* enforce a minimum value of 2 for min_initialized
* reuse widget and refactor for multiline
* fix
* change record copy preset to transcode audio to aac
* fix genai settings ui
- add roles widget to select roles for genai providers
- add dropdown in semantic search to allow selection of embeddings genai provider
* tweak grouping to prioritize fieldOrder before groups
previously, groups were always rendered first. now fieldOrder is respected, and any fields in a group will cause the group and all the fields in that group to be rendered in order. this allows moving the enabled switches to the top of the section
* mobile tweaks
stack buttons, add more space on profiles pane, and move the overridden badge beneath the description
* language consistency
* prevent camera config sections from being regenerated for profiles
* conditionally import axengine module
to match other detectors
* i18n
* update vscode launch.json for new integrated browser
* formatting
* Add go2rtc settings section
- create separate settings section for all go2rtc streams
- extract credentials mask code into util
- create ffmpeg module utility
- i18n
* add camera config updater topic for live section
to support adding go2rtc streams after configuring a new one via the UI
* clean up
* tweak delete button color for consistency
* tweaks
* add CameraProfileConfig model for named config overrides
* add profiles field to CameraConfig
* add active_profile field to FrigateConfig
Runtime-only field excluded from YAML serialization, tracks which
profile is currently active.
* add ProfileManager for profile activation and persistence
Handles snapshotting base configs, applying profile overrides via
deep_merge + apply_section_update, publishing ZMQ updates, and
persisting active profile to /config/.active_profile.
* add profile API endpoints (GET /profiles, GET/PUT /profile)
* add MQTT and dispatcher integration for profiles
- Subscribe to frigate/profile/set MQTT topic
- Publish profile/state and profiles/available on connect
- Add _on_profile_command handler to dispatcher
- Broadcast active profile state on WebSocket connect
* wire ProfileManager into app startup and FastAPI
- Create ProfileManager after dispatcher init
- Restore persisted profile on startup
- Pass dispatcher and profile_manager to FastAPI app
* add tests for invalid profile values and keys
Tests that Pydantic rejects: invalid field values (fps: "not_a_number"),
unknown section keys (ffmpeg in profile), invalid nested values, and
invalid profiles in full config parsing.
* formatting
* fix CameraLiveConfig JSON serialization error on profile activation
refactor _publish_updates to only publish ZMQ updates for
sections that actually changed, not all sections on affected cameras.
* consolidate
* add enabled field to camera profiles for enabling/disabling cameras
* add zones support to camera profiles
* add frontend profile types, color utility, and config save support
* add profile state management and save preview support
* add profileName prop to BaseSection for profile-aware config editing
* add profile section dropdown and wire into camera settings pages
* add per-profile camera enable/disable to Camera Management view
* add profiles summary page with card-based layout and fix backend zone comparison bug
* add active profile badge to settings toolbar
* i18n
* add red dot for any pending changes including profiles
* profile support for mask and zone editor
* fix hidden field validation errors caused by lodash wildcard and schema gaps
lodash unset does not support wildcard (*) segments, so hidden fields like
filters.*.mask were never stripped from form data, leaving null raw_coordinates
that fail RJSF anyOf validation. Add unsetWithWildcard helper and also strip
hidden fields from the JSON schema itself as defense-in-depth.
* add face_recognition and lpr to profile-eligible sections
* move profile dropdown from section panes to settings header
* add profiles enable toggle and improve empty state
* formatting
* tweaks
* tweak colors and switch
* fix profile save diff, masksAndZones delete, and config sync
* ui tweaks
* ensure profile manager gets updated config
* rename profile settings to ui settings
* refactor profilesview and add dots/border colors when overridden
* implement an update_config method for profile manager
* fix mask deletion
* more unique colors
* add top-level profiles config section with friendly names
* implement profile friendly names and improve profile UI
- Add ProfileDefinitionConfig type and profiles field to FrigateConfig
- Use ProfilesApiResponse type with friendly_name support throughout
- Replace Record<string, unknown> with proper JsonObject/JsonValue types
- Add profile creation form matching zone pattern (Zod + NameAndIdFields)
- Add pencil icon for renaming profile friendly names in ProfilesView
- Move Profiles menu item to first under Camera Configuration
- Add activity indicators on save/rename/delete buttons
- Display friendly names in CameraManagementView profile selector
- Fix duplicate colored dots in management profile dropdown
- Fix i18n namespace for overridden base config tooltips
- Move profile override deletion from dropdown trash icon to footer
button with confirmation dialog, matching Reset to Global pattern
- Remove Add Profile from section header dropdown to prevent saving
camera overrides before top-level profile definition exists
- Clean up newProfiles state after API profile deletion
- Refresh profiles SWR cache after saving profile definitions
* remove profile badge in settings and add profiles to main menu
* use icon only on mobile
* change color order
* docs
* show activity indicator on trash icon while deleting a profile
* tweak language
* immediately create profiles on backend instead of deferring to Save All
* hide restart-required fields when editing a profile section
fields that require a restart cannot take effect via profile switching,
so they are merged into hiddenFields when profileName is set
* show active profile indicator in desktop status bar
* fix profile config inheritance bug where Pydantic defaults override base values
The /config API was dumping profile overrides with model_dump() which included
all Pydantic defaults. When the frontend merged these over
the camera's base config, explicitly-set base values were
lost. Now profile overrides are re-dumped with exclude_unset=True so only
user-specified fields are returned.
Also fixes the Save All path generating spurious deletion markers for
restart-required fields that are hidden during profile
editing but not excluded from the raw data sanitization in
prepareSectionSavePayload.
* docs tweaks
* docs tweak
* formatting
* formatting
* fix typing
* fix test pollution
test_maintainer was injecting MagicMock() into sys.modules["frigate.config.camera.updater"] at module load time and never restoring it. When the profile tests later imported CameraConfigUpdateEnum and CameraConfigUpdateTopic from that module, they got mock objects instead of the real dataclass/enum, so equality comparisons always failed
* remove
* fix settings showing profile-merged values when editing base config
When a profile is active, the in-memory config contains effective
(profile-merged) values. The settings UI was displaying these merged
values even when the "Base Config" view was selected.
Backend: snapshot pre-profile base configs in ProfileManager and expose
them via a `base_config` key in the /api/config camera response when a
profile is active. The top-level sections continue to reflect the
effective running config.
Frontend: read from `base_config` when available in BaseSection,
useConfigOverride, useAllCameraOverrides, and prepareSectionSavePayload.
Include formData labels in Object/Audio switches widgets so that labels
added only by a profile override remain visible when editing that profile.
* use rasterized_mask as field
makes it easier to exclude from the schema with exclude=True
prevents leaking of the field when using model_dump for profiles
* fix zones
- Fix zone colors not matching across profiles by falling back to base zone color when profile zone data lacks a color field
- Use base_config for base-layer values in masks/zones view so profile-merged values don't pollute the base config editing view
- Handle zones separately in profile manager snapshot/restore since ZoneConfig requires special serialization (color as private attr, contour generation)
- Inherit base zone color and generate contours for profile zone overrides in profile manager
* formatting
* don't require restart for camera enabled change for profiles
* publish camera state when changing profiles
* formatting
* remove available profiles from mqtt
* improve typing
* add optional field widget
adds a switch to enable nullable fields like skip_motion_threshold
* config field updates
add skip_motion_threshold optional switch
add fps back to detect restart required
* don't use ternary operator when displaying motion previews
the main previews were being unnecessarily unmounted
* lazy mount motion preview clips to reduce DOM overhead
* face recognition dynamic config
* lpr dynamic config
* safe changes for birdseye dynamic config
* bird classification dynamic config
* always assign new config to stats emitter to make telemetry fields dynamic
* add wildcard support for camera config updates in config_set
* update restart required fields for global sections
* add test
* fix rebase issue
* collapsible settings sidebar
use the preexisting control available with shadcn's sidebar (cmd/ctrl-B) to give users more space to set masks/zones on smaller screens
* dynamic ffmpeg
* ensure previews dir exists
when ffmpeg processes restart, there's a brief window where the preview frame generation pipeline is torn down and restarted. before these changes, ffmpeg only restarted on crash/stall recovery or full Frigate restart. Now that ffmpeg restarts happen on-demand via config changes, there's a higher chance a frontend request hits the preview_mp4 or preview_gif endpoints during that brief restart window when the directory might not exist yet. The existing os.listdir() call would throw FileNotFoundError without a directory existence check. this fix just checks if the directory exists and returns 404 if not, exactly how preview_thumbnail already handles the same scenario a few lines below
* global ffmpeg section
* clean up
* tweak
* fix test
* remove unused RecoilRoot and fix implicit ref callback
Remove the vestigial recoil dependency (zero consumers) and convert
the implicit-return ref callback in SearchView to block form to
prevent React 19 interpreting it as a cleanup function.
* replace react-transition-group with framer-motion in Chip
Replace CSSTransition with framer-motion AnimatePresence + motion.div
for React 19 compatibility (react-transition-group uses findDOMNode).
framer-motion is already a project dependency.
* migrate react-grid-layout v1 to v2
- Replace WidthProvider(Responsive) HOC with useContainerWidth hook
- Update types: Layout (single item) → LayoutItem, Layout[] → Layout
- Replace isDraggable/isResizable/resizeHandles with dragConfig/resizeConfig
- Update EventCallback signature for v2 API
- Remove @types/react-grid-layout (v2 includes its own types)
* upgrade vaul, next-themes, framer-motion, react-zoom-pan-pinch
- vaul: ^0.9.1 → ^1.1.2
- next-themes: ^0.3.0 → ^0.4.6
- framer-motion: ^11.5.4 → ^12.35.0 (React 19 native support)
- react-zoom-pan-pinch: 3.4.4 → latest
* upgrade to React 19, react-konva v19, eslint-plugin-react-hooks v5
Core React 19 upgrade with all necessary type fixes:
- Update RefObject types to accept T | null (React 19 refs always nullable)
- Add JSX namespace imports (no longer global in React 19)
- Add initial values to useRef calls (required in React 19)
- Fix ReactElement.props unknown type in config-form components
- Fix IconWrapper interface to use HTMLAttributes instead of index signature
- Add monaco-editor as dev dependency for type declarations
- Upgrade react-konva to v19, eslint-plugin-react-hooks to v5
* upgrade typescript to 5.9.3
* modernize Context.Provider to React 19 shorthand
Replace <Context.Provider value={...}> with <Context value={...}>
across all project-owned context providers. External library contexts
(react-icons IconContext, radix TooltipPrimitive) left unchanged.
* add runtime patches for React 19 compatibility
- Patch @radix-ui/react-compose-refs@1.1.2: stabilize useComposedRefs
to prevent infinite render loops from unstable ref callbacks
https://github.com/radix-ui/primitives/issues/3799
- Patch @radix-ui/react-slot@1.2.4: use useComposedRefs hook in
SlotClone instead of inline composeRefs to prevent re-render cycles
https://github.com/radix-ui/primitives/pull/3804
- Patch react-use-websocket@4.8.1: remove flushSync wrappers that
cause "Maximum update depth exceeded" with React 19 auto-batching
https://github.com/facebook/react/issues/27613
- Add npm overrides to ensure single hoisted copies of compose-refs
and react-slot across all Radix packages
- Add postinstall script for patch-package
- Remove leftover react-transition-group dependency
* formatting
* use availableWidth instead of useContainerWidth for grid layout
The useContainerWidth hook from react-grid-layout v2 returns raw
container width without accounting for scrollbar width, causing the
grid to not fill the full available space. Use the existing
availableWidth value from useResizeObserver which already compensates
for scrollbar width, matching the working implementation.
* remove unused carousel component and fix React 19 peer deps
Remove embla-carousel-react and its unused Carousel UI component.
Upgrade sonner v1 → v2 for native React 19 support. Remove
@types/react-icons stub (react-icons bundles its own types).
These changes eliminate all peer dependency conflicts, so
npm install works without --legacy-peer-deps.
* fix React 19 infinite re-render loop on live dashboard
The "Maximum update depth exceeded" error was caused by two issues:
1. useDeferredStreamMetadata returned a new `{}` default on every render
when SWR data was undefined, creating an unstable reference that
triggered the useEffect in useCameraLiveMode on every render cycle.
Fixed by using a stable module-level EMPTY_METADATA constant.
2. useResizeObserver's rest parameter `...refs` created a new array on
every render, causing its useEffect to re-run and re-observe elements
continuously. Fixed by stabilizing refs with useRef and only
reconnecting the observer when actual DOM elements change.
* debug replay implementation
* fix masks after dev rebase
* fix squash merge issues
* fix
* fix
* fix
* no need to write debug replay camera to config
* camera and filter button and dropdown
* add filters
* add ability to edit motion and object config for debug replay
* add debug draw overlay to debug replay
* add guard to prevent crash when camera is no longer in camera_states
* fix overflow due to radix absolutely positioned elements
* increase number of messages
* ensure deep_merge replaces existing list values when override is true
* add back button
* add debug replay to explore and review menus
* clean up
* clean up
* update instructions to prevent exposing exception info
* fix typing
* refactor output logic
* refactor with helper function
* move init to function for consistency
* use react-jsonschema-form for UI config
* don't use properties wrapper when generating config i18n json
* configure for full i18n support
* section fields
* add descriptions to all fields for i18n
* motion i18n
* fix nullable fields
* sanitize internal fields
* add switches widgets and use friendly names
* fix nullable schema entries
* ensure update_topic is added to api calls
this needs further backend implementation to work correctly
* add global sections, camera config overrides, and reset button
* i18n
* add reset logic to global config view
* tweaks
* fix sections and live validation
* fix validation for schema objects that can be null
* generic and custom per-field validation
* improve generic error validation messages
* remove show advanced fields switch
* tweaks
* use shadcn theme
* fix array field template
* i18n tweaks
* remove collapsible around root section
* deep merge schema for advanced fields
* add array field item template and fix ffmpeg section
* add missing i18n keys
* tweaks
* comment out api call for testing
* add config groups as a separate i18n namespace
* add descriptions to all pydantic fields
* make titles more concise
* new titles as i18n
* update i18n config generation script to use json schema
* tweaks
* tweaks
* rebase
* clean up
* form tweaks
* add wildcards and fix object filter fields
* add field template for additionalproperties schema objects
* improve typing
* add section description from schema and clarify global vs camera level descriptions
* separate and consolidate global and camera i18n namespaces
* clean up now obsolete namespaces
* tweaks
* refactor sections and overrides
* add ability to render components before and after fields
* fix titles
* chore(sections): remove legacy single-section components replaced by template
* refactor configs to use individual files with a template
* fix review description
* apply hidden fields after ui schema
* move util
* remove unused i18n
* clean up error messages
* fix fast refresh
* add custom validation and use it for ffmpeg input roles
* update nav tree
* remove unused
* re-add override and modified indicators
* mark pending changes and add confirmation dialog for resets
* fix red unsaved dot
* tweaks
* add docs links, readonly keys, and restart required per field
* add special case and comments for global motion section
* add section form special cases
* combine review sections
* tweaks
* add audio labels endpoint
* add audio label switches and input to filter list
* fix type
* remove key from config when resetting to default/global
* don't show description for new key/val fields
* tweaks
* spacing tweaks
* add activity indicator and scrollbar tweaks
* add docs to filter fields
* wording changes
* fix global ffmpeg section
* add review classification zones to review form
* add backend endpoint and frontend widget for ffmpeg presets and manual args
* improve wording
* hide descriptions for additional properties arrays
* add warning log about incorrectly nested model config
* spacing and language tweaks
* fix i18n keys
* networking section docs and description
* small wording tweaks
* add layout grid field
* refactor with shared utilities
* field order
* add individual detectors to schema
add detector titles and descriptions (docstrings in pydantic are used for descriptions) and add i18n keys to globals
* clean up detectors section and i18n
* don't save model config back to yaml when saving detectors
* add full detectors config to api model dump
works around the way we use detector plugins so we can have the full detector config for the frontend
* add restart button to toast when restart is required
* add ui option to remove inner cards
* fix buttons
* section tweaks
* don't zoom into text on mobile
* make buttons sticky at bottom of sections
* small tweaks
* highlight label of changed fields
* add null to enum list when unwrapping
* refactor to shared utils and add save all button
* add undo all button
* add RJSF to dictionary
* consolidate utils
* preserve form data when changing cameras
* add mono fonts
* add popover to show what fields will be saved
* fix mobile menu not re-rendering with unsaved dots
* tweaks
* fix logger and env vars config section saving
use escaped periods in keys to retain them in the config file (eg "frigate.embeddings")
* add timezone widget
* role map field with validation
* fix validation for model section
* add another hidden field
* add footer message for required restart
* use rjsf for notifications view
* fix config saving
* add replace rules field
* default column layout and add field sizing
* clean up field template
* refactor profile settings to match rjsf forms
* tweaks
* refactor frigate+ view and make tweaks to sections
* show frigate+ model info in detection model settings when using a frigate+ model
* update restartRequired for all fields
* fix restart fields
* tweaks and add ability enable disabled cameras
more backend changes required
* require restart when enabling camera that is disabled in config
* disable save when form is invalid
* refactor ffmpeg section for readability
* change label
* clean up camera inputs fields
* misc tweaks to ffmpeg section
- add raw paths endpoint to ensure credentials get saved
- restart required tooltip
* maintenance settings tweaks
* don't mutate with lodash
* fix description re-rendering for nullable object fields
* hide reindex field
* update rjsf
* add frigate+ description to settings pane
* disable save all when any section is invalid
* show translated field name in validation error pane
* clean up
* remove unused
* fix genai merge
* fix genai
