* recreate review thumbnail directory before writing and log write failures
cleanup's remove_empty_directories() can rmdir an empty clips/review, after which thumbnail writes silently fail. Ensure the directory exists before both cv2.imwrite calls and check their return value
* add docs for add camera wizard
* Handle indefinite events when a segment needs to forcibly be ended for a ceamera
* update keyframe interval article link
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* fix stale active object indicators on the live dashboard
The camera_activity/<camera> snapshot cache is only written when a client sends onConnect, and object "end" events only update the local state of mounted useCameraActivity hooks, never the cache. As a result, a hook that seeded from a stale cache or missed an "end" event while disconnected showed objects that had already left, with no path to correct itself short of a full page reload.
This change will re-request the snapshot on hook mount (collapsed to one onConnect per task across camera cards), and always re-notify camera_activity topics so hooks reconcile against their own local state instead of relying on snapshot-vs-snapshot comparison, and clear the payload dedup cache on reconnect and resync so byte-identical snapshots still apply.
* docs tweaks
* fix mqtt log message
* use consistent values for lpr debug frame filenames
with millisecond resolution
* apply object events through a functional updater to prevent lost updates
The events effect derived a new objects list from the value captured at render time and wrote the whole list back. When events arrived close
together, a run derived from a stale list erased a concurrent run's removal; the resurrected object then had no remaining "end" event to clear it, and the add branch could mint a duplicate entry that no splice could ever remove, leaving the live dashboard showing active objects the backend had already cleared, until a page reload.
The fix is to apply each event inside setObjects so it operates on the true current list exactly once. Unchanged results return the same reference so React bails out of re-rendering, and the label rewrite is hoisted so added objects get the sub_label/verified label directly instead of relying on the effect re-running against its own state update.
* restructure camera enable/disable pane
* remove obsolete camera edit form
* change terminology to off/on instead of disabled/enabled
* docs
* move menu options and add current camera name badge
* docs
* tweaks
* add generation script
a script to read yaml code blocks from docs markdown files and generate corresponding "Frigate UI" tab instructions based on the json schema, i18n, section configs (hidden fields), and nav mappings
* first pass
* components
* add to gitignore
* second pass
* fix broken anchors
* fixes
* clean up tabs
* version bump
* tweaks
* remove role mapping config from ui
* tracking details tweaks
- fix 4:3 layout
- get and use aspect of record stream if different from detect stream
* aspect ratio docs tip
* spacing
* fix
* i18n fix
* additional logs on ffmpeg exit
* improve no camera view
instead of showing an "add camera" message, show a specific message for empty camera groups when frigate already has cameras added
* add note about separate onvif accounts in some camera firmware
* clarify review summary report docs
* review settings tweaks
- remove horizontal divider
- update description language for switches
- keep save button disabled until review classification settings change
* use correct Toaster component from shadcn
* clarify support for intel b-series (battlemage) gpus
* add clarifying comment to dummy camera docs
* Add Axis Q-6155E camera configuration details
Added Axis Q-6155E camera details with ONVIF service port information.
* Update Axis Q-6155E ONVIF autotracking support details
Added the reason for autotracking not working
* fix i18n keys
* hide disable from context menu for viewers
* Fix auto live check for default dashboard and camera groups
Disabling the Automatic Live View switch in Settings should prevent streaming from occurring. Overriding any settings in a camera group will override the global setting. The check here incorrectly always returned false instead of undefined.
* clarify hardware accelerated enrichments
* clarify
* add note about detect stream to face rec docs
* add note about low end Dahuas for autotracking
* Catch invalid face box / image
* Video tab tweaks
With the changes in https://github.com/blakeblackshear/frigate/pull/18220, the video tab in the Tracked Object Details pane now correctly trims the in-browser HLS video. Because of keyframes and record/detect stream differences, we can manually subtract a couple of seconds from the event start_time to ensure the first few frames aren't cut off from the video
* Clarify
* Don't use Migraphx by default
* Provide better support for running embeddings on GPU
* correctly join cameras
* Adjust blur confidence reduction
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Update docs for alerts and event review
* Add docs for camera groups
* Update reference config with new config values
* Remove env variable requirement
* Add to sidebar
* Update snapshot docs
* add zones example to detection docs too
* Generalize the zone docs
* zoom in/out in search for lost objects
* predicted box should not be empty
* clean up and update zoom logic
* only zoom if enabled
* more cleanup
* check for valid velocity when zooming
* only try absolute zoom in if obj area has changed
* zoom logic
* don't enqueue lost object zoom if already at limit
* don't disable motion boxes during ptz moves
* velocity threshold based on move coefficients
* fix area zoom logic
* disable debug zoom
* don't process objects if ptz moving
* recalc with exponent
* change exponent
* remove lost object zooming
* increase distance threshold for stationary object
* increase distance threshold constant
* only zoom out if nonzero
* camera name in all debug logging
* add camera name to debug logging
* camera variable name consistency
* update calibration behavior and docs
* docs and better zooming
* more sensible target values
* docs wording
* fix velocity threshold variable
* zooming tweaks and remove iou for current objects
* debug and docs
* get valid velocity
* include zero
* additional debug statements
* add zoom hysteresis
* zoom on initial move if relative
* only update target box if we actually zoom
* merge dev
* use getattr instead of get
* increase distance threshold
* reverse logic
* get_camera_status after preset move to store zoom
* final tweaks and docs
* use constants and catch possible debug exception
* adjust zoom factor exponent
* don't run motion estimation when calling preset
* adjust dimension threshold
* use numpy for velocity estimate calcs
* more numpy conversion
* fix numpy shapes
* numpy zeros dimension
* more zoom out conditions
* fix velocity bug
* ensure init has been called in debug view
* ensure onvif init if enabling by mqtt
* change default hysteresis values
* recalc relative zoom value
* zoom out value
* try to zoom when object isn't moving
* try zoom when tracked object is not moving
* don't try to zoom every time
* negate zoom out condition when needed
* hysteresis constants for absolute zooming
* update zoom conditions
* don't recalc target box on zoom only
* zoom out if above area threshold
* don't print zooming debug for stationary obj
* revamp zooming to use area moving average
* zooming tweaks and expose property
* limit zoom with max target box
* use calibration to determine zoom levels
* zoom logic fix
* docs
* add tapo c200 camera
* fix initial absolute zoom
* small zoom logic fix
* better invalid velocity checks
* fix test
* really fix test this time
* Add auto configuration for height, width and fps in detect role
* Add auto-configuration for detect width, height, and fps for input roles with detect in the CameraConfig class in config.py
* Refactor code to retrieve video properties from input stream in CameraConfig class and add optional parameter to retrieve video duration in get_video_properties function
* format
* Set default detect dimensions to 1280x720 and update DetectConfig to use the defaults
* Revert "Set default detect dimensions to 1280x720 and update DetectConfig to use the defaults"
This reverts commit a1aed0414d.
* Add default detect dimensions if autoconfiguration failed and log a warning message
* fix warn message spelling on frigate/config.py
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Ensure detect height and width are not None before using them in camera configuration
* docs: initial commit
* rename streamInfo to stream_info
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
* Apply suggestions from code review
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Update docs
* handle case then get_video_properties returns 0x0 dimension
* Set detect resolution based on stream properties if available, else apply default values
* Update FrigateConfig to set default values for stream_info if resolution detection fails
* Update camera detection dimensions based on stream information if available
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
