* start audio transcription post processor when enabled on any camera
* Fetch embed key whenever an error occurs in case the llama server was restarted
* mypy
* add tooltips for colored dots in settings menu
* add ability to reorder cameras from management pane
* add ability to reorder birdseye
* add reordering save text to camera management view
* Include NPU in latency performance hint
* Implement turbo for NPU on object detection
* hide order fields
* drop auto-derived field paths from camera value when unset globally
* use correct field type for export hwaccel args
* add debug replay to detail actions menu
* clarify debug replay in docs
* guard get_current_frame_time against missing camera state
* Implement debug reply from export
* Refactor debug replay to use sources for dynamic playback
* Mypy
* fix debug export replay source timestamp handling
* skip replay cameras in stats immediately
* broadcast debug replay state over ws and buffer pre-OPEN sends
- push debug replay session state over the job_state ws topic so the status bar reacts instantly to start/stop without polling
- fix child-effect-before-parent-effect race in WsProvider that silently dropped initial snapshot requests on cold load
* fix debug replay test hang
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* detector UI fixes
- derive detector and model from memo rather than using two drain useeffects
- sanitize save payload through sanitizeSectionData to prevent yaml validation issues
* increase display duration for restart required toasts
* mimic logic in detector section for save all button
also, increase toast duration for restart required toasts
* fixes and tweaks
- use section hidden fields for sanitization instead of duplicating code
- use parent hooks so save all, pending data, and the status dots work correctly
* add embedded mode to BaseSection so parents can host the save action
* add optional action slot to current Frigate+ model summary
* add w-full to action slot flex wrapper for explicit width contract
* i18n
* merged detectors and model settings view
* fix document title
* Embed detector form in merged settings view
* add detection model card with tabs and custom model embed
* add Frigate+ model selector with filter popover to merged page
* Add mismatch banner and gate save on detector and model compatibility
* Wire atomic save, restart toast, and undo on detectors and model page
* Clear child pending data on undo
* route merged detectors and model view in settings
* trim Frigate+ page to account-only and remove old detection model view
* basic e2e
* Fix unsaved-changes guard, custom path leak, and post-failure cache resync
* Rename to Detectors and model, float Modified badge, use ConfigMessageBanner for mismatch
* Hide Plus/Custom tabs when Frigate+ is not enabled
* Detect active Plus model via model.plus.id instead of path prefix
* Sync state back to snapshot when child form un-modifies and remount on undo
* Always require restart on save since model changes also need one
* Wrap Frigate+ model selector in SplitCardRow with label and description
* rename tab
* update docs
* sync top-level model with default detector's resolved model
when the user doesn't define a top-level `model:` block, `FrigateConfig.model` stayed at pydantic field defaults (320×320, /labelmap.txt) while the per-detector model picked up `DEFAULT_MODEL` for openvino on cpu (300×300, coco_91cl_bkgr.txt introduced in #23127), causing `RemoteObjectDetector` to fail with "buffer is too small for requested array" because the SHM was sized from the per-detector model but mapped using the top-level one. After the detector loop, copy the first detector's resolved model up to `self.model` so both sides agree on dimensions and labelmap
* revert to cpu detector by default
use openvino cpu for new configs only
* add defaults
* improve scroll handling for non-modal DropdownMenu in classification and face selection dialogs
* clean up
* fix incorrect key capitalization
* fix profile array overrides not replacing base arrays
don't use lodash merge(), it does positional merging and an empty source array doesn't override the destination, and shorter arrays leak destination elements through.
backend is unaffected, so the saved config and actual backend functionality was right
* only show audio debug tab when audio is enabled in config
* move apple_compatibility out of advanced
* remove retry_interval from UI
99% of users should never be changing this
* hide switch in optionalfieldwidget if editing a profile
* add override badges for cameras and profiles
collect shared functions into the config util and separate hooks
* Use new models endpoint info to determine modalities
* clarify language
* fix linter
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add optional onClick to EmptyCard
* show EmptyCard in face rec when face library is empty
* add loading indicator
* add description to camera management pane
* Cleanup when use snapshot but can't load snapshot
* Migrate files
* fix birdseye color distortion when configured aspect ratio is unsupported
* Skip processing end for object descriptions
* don't crash if stats is null
* fix genai roles in migration
* frigate+ pane updates
- allow users to select a plus model from the select even when one was not previously loaded
- always show model summary card
- add model filter popover
- add restart button totast
* fix frigate+ pane layout and buttons to match other settings panes
* match button layout in go2rtc settings view
* make audio maintainer respond to dynamic config updates
* check correct zone name in publish state
* fix nested translation extraction for Optional dict and list fields
* mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* hide camera overrides badge from system sections
* show empty card on camera metrics page when no cameras are defined
* fix enabled camera state switch after adding via wizard
Cameras added mid-session have no WS state until the dispatcher publishes camera_activity (which only happens on a fresh onConnect). Fall back to the config's enabled value so the switch reflects reality immediately after the wizard closes.
* guard camera enabled access
console would throw errors after adding via camera wizard
* fix useOptimisticState dropping debounced setState under StrictMode
* use openvino on cpu as default model
- faster than tflite on cpu
- add to default generated config
* use an enum for model_size
the frontend will then render this as a select dropdown because of the changes in the json schema
* i18n
* sync object filter entries with tracked labels in camera config form
Filter sub-collapsibles in the camera Objects section are driven by `filters` dict keys, but profile merges and live track-switch edits don't add matching entries, so newly tracked labels (like from a profile override) had no collapsible. Synthesize default filter entries from `track` in the form data so every tracked label renders a collapsible; baseline data also gets the synthesized entries, so save payloads are unchanged.
* revalidate raw paths cache after config save so CameraPathWidget shows fresh credentials
* fix test
* restore masked ffmpeg credentials when persisting camera config
* formatting
* rebuild ffmpeg commands when enabling recording for the first time
Toggling record.enabled from the config UI updated the in-memory config but left ffmpeg running with its original command, so the record output args were never wired in and nothing landed in the cache for the maintainer to move. The record config update now rebuilds ffmpeg_cmds when enabled_in_config transitions, and the camera watchdog restarts ffmpeg on a false to true transition so the record output gets wired in. MQTT toggles, which only flip record.enabled at runtime, are unaffected and continue to work via the maintainer's drop/keep gate.
* keep record toggle switch in single camera view disabled until enabled in config
* fix override detection for sections unset in the global config
Override badges and the blue dot now compare against schema defaults for sections like motion that the API serializes as null when omitted from the global YAML, instead of treating any populated camera config as an override
* add support for config-aware patterns in section hiddenFields
Section configs can now declare dynamic hidden-field entries as functions of the loaded config; objects.ts uses this to hide auto-populated attribute filters (DHL, face, license_plate, etc.) from the form, save flow, and override popover when those labels aren't user-settable
* siimplify object filters handling
live updating was getting very messy. users will just need to save once they enable a new object in order to see filters for that object
* tweaks
* update docs for new detector default
* make genai provider required and add special case for UI
prevent validation errors from appearing on initial creation of genai provider by setting the first option in the select dropdown as default
* use continuous expire date when loading reviews for recording cleanup
* reset heatmap filter when motion preview camera changes
* Add note about speed zones unit when enabled
* don't display fps warning for dedicated LPR cameras
* language tweaks
* allow changing camera type from management UI
* i18n
* fix ollama tool calling failure when conversation contains multimodal content from live frame tool results
* fix mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* ensure embeddings process restarts after maintainer thread crash
* add docs link to media sync settings
* fix color
Co-authored-by: Copilot <copilot@github.com>
* match link color with other sections
* ensure recording staleness threshold scales with segment_time
* docs tweak
* Fix llama.cpp media marker
* Fix gemini tools call
---------
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Reduce max frames per second to 1
* Use pydantic but don't fail if some constraints are not met.
* Adjust limits
* Adjust limits
* Cleanup
* add unsaved changes icon/popover to individual settings section
* allow changing camera friendly_name from camera management pane
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* use ffmpeg to probe rtsp urls instead of cv2
cv2 is faster (no subprocess launch) and will continue to be used for recording segments
* tweak faq
* change unsaved color to orange
avoids confusion with validation errors (red)
* don't use any variant of orange as a profile color
avoids confusion with unsaved changes
* more unsaved color tweaks
* apply annotation offset to frigate+ submission frame time
* fix broken docs links with hash fragments that resolve wrong on reload
* undo
* use recording snapshot for frigate+ frame submission from VideoControls
rather than a canvas grab/paint, which may not always align with an ffmpeg snapshot due to keyframes
* add more docs links
- display docs link for main sections on collapsible fields
* dialog button consistency
* display area as proper percentage in debug view
* match replay objects list with debug view
* motion search fixes
- tweak progress bar to exclude heatmap and inactive segments
- show metrics immediately on search start
- fix preview frame loading race
- fix polygon missing after dialog remount
- don't try to drag the image when dragging vertex of polygon
* add activity indicator to storage metrics
* make sub label query for events API endpoints case insensitive
* add guards to reject missing sub commands
* mask/zone bugfixes
- fix websocket crash when creating a new mask or zone before a name is assigned
- fix deleted masks and zones not disappearing from the list until navigating away
- fix deleting profile override not reverting to the base mask in the list
- fix inertia defaulting to nan
* disable save button on invalid form state
* fix validation for speed estimation
* ensure polygon is closed before allowing save
* require all masks and zones to be on the base config
* clarify dialog message and tooltip when removing an override
* clarify docs
* implement hook to return resolved "24hour" | "12hour" string
delegate to existing use24HourTime(), which correctly detects the browser's locale preference via Intl.DateTimeFormat
* update frontend to use use24HourTime(config) or useTimeFormat(config) instead of directly comparing config.ui.time_format
* tweak language
* show validation errors in json response
* fix export hwaccel args field in UI
* increase annotation offset consts
* fix save button race conditions, add reset spinner, and fix enrichments profile leak
- Disable both Save and SaveAll buttons while either operation is in progress so users cannot trigger concurrent saves
- Show activity indicator on Reset to Default/Global button during the API call
- Enrichments panes (semantic search, genai, face recognition) now always show base config fields regardless of profile selection in the header dropdown
* fix genai additional_concerns validation error with textarea array widget
The additional_concerns field is list[str] in the backend but was using the textarea widget which produces a string value, causing validation errors.
Created a TextareaArrayWidget that converts between array (one item per line) and textarea display, and switched additional_concerns to use it
* populate and sort global audio filters for all audio labels
* add column labels in profiles view
* enforce a minimum value of 2 for min_initialized
* reuse widget and refactor for multiline
* fix
* change record copy preset to transcode audio to aac
* mobile button spacing
* prevent console warning about div being descendant of p
* ensure consistent spacing
* add missing i18n keys
* i18n fixes
- add missing translations
- fix dot notation keys
* use plain string
* add missing key
* add i18next-cli commands for extraction and status
also add false positives removal for several keys
* add i18n key check step to PR workflow
* formatting
* fix genai settings ui
- add roles widget to select roles for genai providers
- add dropdown in semantic search to allow selection of embeddings genai provider
* tweak grouping to prioritize fieldOrder before groups
previously, groups were always rendered first. now fieldOrder is respected, and any fields in a group will cause the group and all the fields in that group to be rendered in order. this allows moving the enabled switches to the top of the section
* mobile tweaks
stack buttons, add more space on profiles pane, and move the overridden badge beneath the description
* language consistency
* prevent camera config sections from being regenerated for profiles
* conditionally import axengine module
to match other detectors
* i18n
* update vscode launch.json for new integrated browser
* formatting
* Add go2rtc settings section
- create separate settings section for all go2rtc streams
- extract credentials mask code into util
- create ffmpeg module utility
- i18n
* add camera config updater topic for live section
to support adding go2rtc streams after configuring a new one via the UI
* clean up
* tweak delete button color for consistency
* tweaks
* add CameraProfileConfig model for named config overrides
* add profiles field to CameraConfig
* add active_profile field to FrigateConfig
Runtime-only field excluded from YAML serialization, tracks which
profile is currently active.
* add ProfileManager for profile activation and persistence
Handles snapshotting base configs, applying profile overrides via
deep_merge + apply_section_update, publishing ZMQ updates, and
persisting active profile to /config/.active_profile.
* add profile API endpoints (GET /profiles, GET/PUT /profile)
* add MQTT and dispatcher integration for profiles
- Subscribe to frigate/profile/set MQTT topic
- Publish profile/state and profiles/available on connect
- Add _on_profile_command handler to dispatcher
- Broadcast active profile state on WebSocket connect
* wire ProfileManager into app startup and FastAPI
- Create ProfileManager after dispatcher init
- Restore persisted profile on startup
- Pass dispatcher and profile_manager to FastAPI app
* add tests for invalid profile values and keys
Tests that Pydantic rejects: invalid field values (fps: "not_a_number"),
unknown section keys (ffmpeg in profile), invalid nested values, and
invalid profiles in full config parsing.
* formatting
* fix CameraLiveConfig JSON serialization error on profile activation
refactor _publish_updates to only publish ZMQ updates for
sections that actually changed, not all sections on affected cameras.
* consolidate
* add enabled field to camera profiles for enabling/disabling cameras
* add zones support to camera profiles
* add frontend profile types, color utility, and config save support
* add profile state management and save preview support
* add profileName prop to BaseSection for profile-aware config editing
* add profile section dropdown and wire into camera settings pages
* add per-profile camera enable/disable to Camera Management view
* add profiles summary page with card-based layout and fix backend zone comparison bug
* add active profile badge to settings toolbar
* i18n
* add red dot for any pending changes including profiles
* profile support for mask and zone editor
* fix hidden field validation errors caused by lodash wildcard and schema gaps
lodash unset does not support wildcard (*) segments, so hidden fields like
filters.*.mask were never stripped from form data, leaving null raw_coordinates
that fail RJSF anyOf validation. Add unsetWithWildcard helper and also strip
hidden fields from the JSON schema itself as defense-in-depth.
* add face_recognition and lpr to profile-eligible sections
* move profile dropdown from section panes to settings header
* add profiles enable toggle and improve empty state
* formatting
* tweaks
* tweak colors and switch
* fix profile save diff, masksAndZones delete, and config sync
* ui tweaks
* ensure profile manager gets updated config
* rename profile settings to ui settings
* refactor profilesview and add dots/border colors when overridden
* implement an update_config method for profile manager
* fix mask deletion
* more unique colors
* add top-level profiles config section with friendly names
* implement profile friendly names and improve profile UI
- Add ProfileDefinitionConfig type and profiles field to FrigateConfig
- Use ProfilesApiResponse type with friendly_name support throughout
- Replace Record<string, unknown> with proper JsonObject/JsonValue types
- Add profile creation form matching zone pattern (Zod + NameAndIdFields)
- Add pencil icon for renaming profile friendly names in ProfilesView
- Move Profiles menu item to first under Camera Configuration
- Add activity indicators on save/rename/delete buttons
- Display friendly names in CameraManagementView profile selector
- Fix duplicate colored dots in management profile dropdown
- Fix i18n namespace for overridden base config tooltips
- Move profile override deletion from dropdown trash icon to footer
button with confirmation dialog, matching Reset to Global pattern
- Remove Add Profile from section header dropdown to prevent saving
camera overrides before top-level profile definition exists
- Clean up newProfiles state after API profile deletion
- Refresh profiles SWR cache after saving profile definitions
* remove profile badge in settings and add profiles to main menu
* use icon only on mobile
* change color order
* docs
* show activity indicator on trash icon while deleting a profile
* tweak language
* immediately create profiles on backend instead of deferring to Save All
* hide restart-required fields when editing a profile section
fields that require a restart cannot take effect via profile switching,
so they are merged into hiddenFields when profileName is set
* show active profile indicator in desktop status bar
* fix profile config inheritance bug where Pydantic defaults override base values
The /config API was dumping profile overrides with model_dump() which included
all Pydantic defaults. When the frontend merged these over
the camera's base config, explicitly-set base values were
lost. Now profile overrides are re-dumped with exclude_unset=True so only
user-specified fields are returned.
Also fixes the Save All path generating spurious deletion markers for
restart-required fields that are hidden during profile
editing but not excluded from the raw data sanitization in
prepareSectionSavePayload.
* docs tweaks
* docs tweak
* formatting
* formatting
* fix typing
* fix test pollution
test_maintainer was injecting MagicMock() into sys.modules["frigate.config.camera.updater"] at module load time and never restoring it. When the profile tests later imported CameraConfigUpdateEnum and CameraConfigUpdateTopic from that module, they got mock objects instead of the real dataclass/enum, so equality comparisons always failed
* remove
* fix settings showing profile-merged values when editing base config
When a profile is active, the in-memory config contains effective
(profile-merged) values. The settings UI was displaying these merged
values even when the "Base Config" view was selected.
Backend: snapshot pre-profile base configs in ProfileManager and expose
them via a `base_config` key in the /api/config camera response when a
profile is active. The top-level sections continue to reflect the
effective running config.
Frontend: read from `base_config` when available in BaseSection,
useConfigOverride, useAllCameraOverrides, and prepareSectionSavePayload.
Include formData labels in Object/Audio switches widgets so that labels
added only by a profile override remain visible when editing that profile.
* use rasterized_mask as field
makes it easier to exclude from the schema with exclude=True
prevents leaking of the field when using model_dump for profiles
* fix zones
- Fix zone colors not matching across profiles by falling back to base zone color when profile zone data lacks a color field
- Use base_config for base-layer values in masks/zones view so profile-merged values don't pollute the base config editing view
- Handle zones separately in profile manager snapshot/restore since ZoneConfig requires special serialization (color as private attr, contour generation)
- Inherit base zone color and generate contours for profile zone overrides in profile manager
* formatting
* don't require restart for camera enabled change for profiles
* publish camera state when changing profiles
* formatting
* remove available profiles from mqtt
* improve typing
* fix double scrollbar in debug replay
* always hide ffmpeg cpu warnings for replay cameras
* add slovenian
* fix motion previews on safari and ios
match the logic used in ScrubbablePreview for manually stepping currentTime at the correct rate
* prevent motion recalibration when opening motion tuner
* add shm frame lifetime calculation and update UI for shared memory metrics
* consistent sizing on activity indicator in save buttons
* fix offline overlay overflowing on mobile when in grid mode
* face recognition dynamic config
* lpr dynamic config
* safe changes for birdseye dynamic config
* bird classification dynamic config
* always assign new config to stats emitter to make telemetry fields dynamic
* add wildcard support for camera config updates in config_set
* update restart required fields for global sections
* add test
* fix rebase issue
* collapsible settings sidebar
use the preexisting control available with shadcn's sidebar (cmd/ctrl-B) to give users more space to set masks/zones on smaller screens
* dynamic ffmpeg
* ensure previews dir exists
when ffmpeg processes restart, there's a brief window where the preview frame generation pipeline is torn down and restarted. before these changes, ffmpeg only restarted on crash/stall recovery or full Frigate restart. Now that ffmpeg restarts happen on-demand via config changes, there's a higher chance a frontend request hits the preview_mp4 or preview_gif endpoints during that brief restart window when the directory might not exist yet. The existing os.listdir() call would throw FileNotFoundError without a directory existence check. this fix just checks if the directory exists and returns 404 if not, exactly how preview_thumbnail already handles the same scenario a few lines below
* global ffmpeg section
* clean up
* tweak
* fix test
* migrator and runtime config changes
* component changes to use rasterized_mask
* frontend
* convert none to empty string for config save
* i18n
* update tests
* add enabled config to zones
* zones frontend
* i18n
* docs
* tweaks
* use dashed stroke to indicate disabled
* allow toggle from icon
* use filelock to ensure atomic config updates from endpoint
* enforce atomic config update in the frontend
* toggle via mqtt
* fix global object masks
* correctly handle global object masks in dispatcher
* ws hooks
* render masks and zones based on ws enabled state
* use enabled_in_config for zones and masks
* frontend for enabled_in_config
* tweaks
* i18n
* publish websocket on config save
* i18n tweaks
* pydantic title and description
* i18n generation
* tweaks
* fix typing
* use react-jsonschema-form for UI config
* don't use properties wrapper when generating config i18n json
* configure for full i18n support
* section fields
* add descriptions to all fields for i18n
* motion i18n
* fix nullable fields
* sanitize internal fields
* add switches widgets and use friendly names
* fix nullable schema entries
* ensure update_topic is added to api calls
this needs further backend implementation to work correctly
* add global sections, camera config overrides, and reset button
* i18n
* add reset logic to global config view
* tweaks
* fix sections and live validation
* fix validation for schema objects that can be null
* generic and custom per-field validation
* improve generic error validation messages
* remove show advanced fields switch
* tweaks
* use shadcn theme
* fix array field template
* i18n tweaks
* remove collapsible around root section
* deep merge schema for advanced fields
* add array field item template and fix ffmpeg section
* add missing i18n keys
* tweaks
* comment out api call for testing
* add config groups as a separate i18n namespace
* add descriptions to all pydantic fields
* make titles more concise
* new titles as i18n
* update i18n config generation script to use json schema
* tweaks
* tweaks
* rebase
* clean up
* form tweaks
* add wildcards and fix object filter fields
* add field template for additionalproperties schema objects
* improve typing
* add section description from schema and clarify global vs camera level descriptions
* separate and consolidate global and camera i18n namespaces
* clean up now obsolete namespaces
* tweaks
* refactor sections and overrides
* add ability to render components before and after fields
* fix titles
* chore(sections): remove legacy single-section components replaced by template
* refactor configs to use individual files with a template
* fix review description
* apply hidden fields after ui schema
* move util
* remove unused i18n
* clean up error messages
* fix fast refresh
* add custom validation and use it for ffmpeg input roles
* update nav tree
* remove unused
* re-add override and modified indicators
* mark pending changes and add confirmation dialog for resets
* fix red unsaved dot
* tweaks
* add docs links, readonly keys, and restart required per field
* add special case and comments for global motion section
* add section form special cases
* combine review sections
* tweaks
* add audio labels endpoint
* add audio label switches and input to filter list
* fix type
* remove key from config when resetting to default/global
* don't show description for new key/val fields
* tweaks
* spacing tweaks
* add activity indicator and scrollbar tweaks
* add docs to filter fields
* wording changes
* fix global ffmpeg section
* add review classification zones to review form
* add backend endpoint and frontend widget for ffmpeg presets and manual args
* improve wording
* hide descriptions for additional properties arrays
* add warning log about incorrectly nested model config
* spacing and language tweaks
* fix i18n keys
* networking section docs and description
* small wording tweaks
* add layout grid field
* refactor with shared utilities
* field order
* add individual detectors to schema
add detector titles and descriptions (docstrings in pydantic are used for descriptions) and add i18n keys to globals
* clean up detectors section and i18n
* don't save model config back to yaml when saving detectors
* add full detectors config to api model dump
works around the way we use detector plugins so we can have the full detector config for the frontend
* add restart button to toast when restart is required
* add ui option to remove inner cards
* fix buttons
* section tweaks
* don't zoom into text on mobile
* make buttons sticky at bottom of sections
* small tweaks
* highlight label of changed fields
* add null to enum list when unwrapping
* refactor to shared utils and add save all button
* add undo all button
* add RJSF to dictionary
* consolidate utils
* preserve form data when changing cameras
* add mono fonts
* add popover to show what fields will be saved
* fix mobile menu not re-rendering with unsaved dots
* tweaks
* fix logger and env vars config section saving
use escaped periods in keys to retain them in the config file (eg "frigate.embeddings")
* add timezone widget
* role map field with validation
* fix validation for model section
* add another hidden field
* add footer message for required restart
* use rjsf for notifications view
* fix config saving
* add replace rules field
* default column layout and add field sizing
* clean up field template
* refactor profile settings to match rjsf forms
* tweaks
* refactor frigate+ view and make tweaks to sections
* show frigate+ model info in detection model settings when using a frigate+ model
* update restartRequired for all fields
* fix restart fields
* tweaks and add ability enable disabled cameras
more backend changes required
* require restart when enabling camera that is disabled in config
* disable save when form is invalid
* refactor ffmpeg section for readability
* change label
* clean up camera inputs fields
* misc tweaks to ffmpeg section
- add raw paths endpoint to ensure credentials get saved
- restart required tooltip
* maintenance settings tweaks
* don't mutate with lodash
* fix description re-rendering for nullable object fields
* hide reindex field
* update rjsf
* add frigate+ description to settings pane
* disable save all when any section is invalid
* show translated field name in validation error pane
* clean up
* remove unused
* fix genai merge
* fix genai
* generic job infrastructure
* types and dispatcher changes for jobs
* save data in memory only for completed jobs
* implement media sync job and endpoints
* change logs to debug
* websocket hook and types
* frontend
* i18n
* docs tweaks
* endpoint descriptions
* tweak docs
* Update version
* Create scaffolding for case management (#21293)
* implement case management for export apis (#21295)
* refactor vainfo to search for first GPU (#21296)
use existing LibvaGpuSelector to pick appropritate libva device
* Case management UI (#21299)
* Refactor export cards to match existing cards in other UI pages
* Show cases separately from exports
* Add proper filtering and display of cases
* Add ability to edit and select cases for exports
* Cleanup typing
* Hide if no unassigned
* Cleanup hiding logic
* fix scrolling
* Improve layout
* Camera connection quality indicator (#21297)
* add camera connection quality metrics and indicator
* formatting
* move stall calcs to watchdog
* clean up
* change watchdog to 1s and separately track time for ffmpeg retry_interval
* implement status caching to reduce message volume
* Export filter UI (#21322)
* Get started on export filters
* implement basic filter
* Implement filtering and adjust api
* Improve filter handling
* Improve navigation
* Cleanup
* handle scrolling
* Refactor temperature reporting for detectors and implement Hailo temp reading (#21395)
* Add Hailo temperature retrieval
* Refactor `get_hailo_temps()` to use ctxmanager
* Show Hailo temps in system UI
* Move hailo_platform import to get_hailo_temps
* Refactor temperatures calculations to use within detector block
* Adjust webUI to handle new location
---------
Co-authored-by: tigattack <10629864+tigattack@users.noreply.github.com>
* Camera-specific hwaccel settings for timelapse exports (correct base) (#21386)
* added hwaccel_args to camera.record.export config struct
* populate camera.record.export.hwaccel_args with a cascade up to camera then global if 'auto'
* use new hwaccel args in export
* added documentation for camera-specific hwaccel export
* fix c/p error
* missed an import
* fleshed out the docs and comments a bit
* ruff lint
* separated out the tips in the doc
* fix documentation
* fix and simplify reference config doc
* Add support for GPU and NPU temperatures (#21495)
* Add rockchip temps
* Add support for GPU and NPU temperatures in the frontend
* Add support for Nvidia temperature
* Improve separation
* Adjust graph scaling
* Exports Improvements (#21521)
* Add images to case folder view
* Add ability to select case in export dialog
* Add to mobile review too
* Add API to handle deleting recordings (#21520)
* Add recording delete API
* Re-organize recordings apis
* Fix import
* Consolidate query types
* Add media sync API endpoint (#21526)
* add media cleanup functions
* add endpoint
* remove scheduled sync recordings from cleanup
* move to utils dir
* tweak import
* remove sync_recordings and add config migrator
* remove sync_recordings
* docs
* remove key
* clean up docs
* docs fix
* docs tweak
* Media sync API refactor and UI (#21542)
* generic job infrastructure
* types and dispatcher changes for jobs
* save data in memory only for completed jobs
* implement media sync job and endpoints
* change logs to debug
* websocket hook and types
* frontend
* i18n
* docs tweaks
* endpoint descriptions
* tweak docs
* use same logging pattern in sync_recordings as the other sync functions (#21625)
* Fix incorrect counting in sync_recordings (#21626)
* Update go2rtc to v1.9.13 (#21648)
Co-authored-by: Eugeny Tulupov <eugeny.tulupov@spirent.com>
* Refactor Time-Lapse Export (#21668)
* refactor time lapse creation to be a separate API call with ability to pass arbitrary ffmpeg args
* Add CPU fallback
* Optimize empty directory cleanup for recordings (#21695)
The previous empty directory cleanup did a full recursive directory
walk, which can be extremely slow. This new implementation only removes
directories which have a chance of being empty due to a recent file
deletion.
* Implement llama.cpp GenAI Provider (#21690)
* Implement llama.cpp GenAI Provider
* Add docs
* Update links
* Fix broken mqtt links
* Fix more broken anchors
* Remove parents in remove_empty_directories (#21726)
The original implementation did a full directory tree walk to find and remove
empty directories, so this implementation should remove the parents as well,
like the original did.
* Implement LLM Chat API with tool calling support (#21731)
* Implement initial tools definiton APIs
* Add initial chat completion API with tool support
* Implement other providers
* Cleanup
* Offline preview image (#21752)
* use latest preview frame for latest image when camera is offline
* remove frame extraction logic
* tests
* frontend
* add description to api endpoint
* Update to ROCm 7.2.0 (#21753)
* Update to ROCm 7.2.0
* ROCm now works properly with JinaV1
* Arcface has compilation error
* Add live context tool to LLM (#21754)
* Add live context tool
* Improve handling of images in request
* Improve prompt caching
* Add networking options for configuring listening ports (#21779)
* feat: add X-Frame-Time when returning snapshot (#21932)
Co-authored-by: Florent MORICONI <170678386+fmcloudconsulting@users.noreply.github.com>
* Improve jsmpeg player websocket handling (#21943)
* improve jsmpeg player websocket handling
prevent websocket console messages from appearing when player is destroyed
* reformat files after ruff upgrade
* Allow API Events to be Detections or Alerts, depending on the Event Label (#21923)
* - API created events will be alerts OR detections, depending on the event label, defaulting to alerts
- Indefinite API events will extend the recording segment until those events are ended
- API event start time is the actual start time, instead of having a pre-buffer of record.event_pre_capture
* Instead of checking for indefinite events on a camera before deciding if we should end the segment, only update last_detection_time and last_alert_time if frame_time is greater, which should have the same effect
* Add the ability to set a pre_capture number of seconds when creating a manual event via the API. Default behavior unchanged
* Remove unnecessary _publish_segment_start() call
* Formatting
* handle last_alert_time or last_detection_time being None when checking them against the frame_time
* comment manual_info["label"].split(": ")[0] for clarity
* ffmpeg Preview Segment Optimization for "high" and "very_high" (#21996)
* Introduce qmax parameter for ffmpeg preview encoding
Added PREVIEW_QMAX_PARAM to control ffmpeg encoding quality.
* formatting
* Fix spacing in qmax parameters for preview quality
* Adapt to new Gemini format
* Fix frame time access
* Remove exceptions
* Cleanup
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
Co-authored-by: tigattack <10629864+tigattack@users.noreply.github.com>
Co-authored-by: Andrew Roberts <adroberts@gmail.com>
Co-authored-by: Eugeny Tulupov <zhekka3@gmail.com>
Co-authored-by: Eugeny Tulupov <eugeny.tulupov@spirent.com>
Co-authored-by: John Shaw <1753078+johnshaw@users.noreply.github.com>
Co-authored-by: Eric Work <work.eric@gmail.com>
Co-authored-by: FL42 <46161216+fl42@users.noreply.github.com>
Co-authored-by: Florent MORICONI <170678386+fmcloudconsulting@users.noreply.github.com>
Co-authored-by: nulledy <254504350+nulledy@users.noreply.github.com>
* tracking details tweaks
- fix 4:3 layout
- get and use aspect of record stream if different from detect stream
* aspect ratio docs tip
* spacing
* fix
* i18n fix
* additional logs on ffmpeg exit
* improve no camera view
instead of showing an "add camera" message, show a specific message for empty camera groups when frigate already has cameras added
* add note about separate onvif accounts in some camera firmware
* clarify review summary report docs
* review settings tweaks
- remove horizontal divider
- update description language for switches
- keep save button disabled until review classification settings change
* use correct Toaster component from shadcn
* clarify support for intel b-series (battlemage) gpus
* add clarifying comment to dummy camera docs
* misc triggers tweaks
i18n fixes
fix toaster color
fix clicking on labels selecting incorrect checkbox
* update copilot instructions
* lpr docs tweaks
* add retry params to gemini
* i18n fix
* ensure users only see recognized plates from accessible cameras in explore
* ensure all zone filters are converted to pixels
zone-level filters were never converted from percentage area to pixels. RuntimeFilterConfig was only applied to filters at the camera level, not zone.filters.
Fixes https://github.com/blakeblackshear/frigate/discussions/21694
* add test for percentage based zone filters
* use export id for key instead of name
* update gemini docs
* icon improvements
add type to getIconForLabel
provide default icon for audio events
* Add preferred language to review docs
* prevent react Suspense crash during auth redirect
add redirect-check guards to stop rendering lazy routes while navigation is pending (fixes some users seeing React error #426 when auth expires)
* Uppsercase model name
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* remove footer messages and add update topic to motion tuner view
restart after changing values is no longer required
* add cache key and activity indicator for loading classification wizard images
* Always mark model as untrained when a classname is changed
* clarify object classification docs
* add debug logs for individual lpr replace_rules
* update memray docs
* memray tweaks
* Don't fail for audio transcription when semantic search is not enabled
* Fix incorrect mismatch for object vs sub label
* Check if the video is currently playing when deciding to seek due to misalignment
* Refactor timeline event handling to allow multiple timeline entries per update
* Check if zones have actually changed (not just count) for event state update
* show event icon on mobile
* move div inside conditional
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Fix saving zone friendly name when it wasn't set
* Fix UTF-8 handling for Onvif
* Don't remove none directory for classes
* Lookup all event IDs for review item immediately
* Cleanup typing
* Only fetch events when review group is open
* Cleanup
* disable debug paths switch for autotracking cameras
* fix clickable birdseye
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* jwt permissions
* add old password to body req
* add model and migration
need to track the datetime that passwords were changed for the jwt
* auth api backend changes
- use os.open to create jwt secret with restrictive permissions (0o600: read/write for owner only)
- add backend validation for password strength
- add iat claim to jwt so the server can determine when a token was issued and reject any jwts issued before a user's password_changed_at timestamp, ensuring old tokens are invalidated after a password change
- set logout route to public to avoid 401 when logging out
- issue new jwt for users who change their own password so they stay logged in
* improve set password dialog
- add field to verify old password
- add password strength requirements
* frontend tweaks for password dialog
* i18n
* use verify endpoint for existing password verification
avoid /login side effects (creating a new session)
* public logout
* only check if password has changed on jwt refresh
* fix tests
Fix migration 030 by using raw sql to select usernames (avoid ORM selecting nonexistent columns)
* add multi device warning to password dialog
* remove password verification endpoint
Just send old_password + new password in one request, let the backend handle verification in a single operation
