* Support read-only rootfs with self-signed certs in /config/tls
* Support read-only rootfs in s6 and pre-compile bytecode
* Assert read-only rootfs support in CI
* Document hardened read-only deployment
* keep certsync's cert selection identical to nginx's
* note the uid trade-off in user: mode
* fail fast when EXTRA_GROUPS or a missing media volume meets read_only
* keep nosuid and nodev on the /run tmpfs
* support read_only in the default mode
* don't take go2rtc down when the homekit file isn't writable
* lead with the hardware consequence of switching to user:
* refuse to write TLS material through a symlink as root
* note that memryx writes models to the root filesystem
* certsync watches whichever cert path nginx loaded
* Run the frigate service as the frigate user
* Run go2rtc as its own restricted user
* Run nginx as the frigate user with writable state in /tmp/nginx
* Disable bandwidth stats gracefully when not running as root
* Hand TensorRT model cache ownership to the runtime user
* Document non-root operation and per-hardware device access
* Create /media/frigate after the ownership sweep
* Assert non-root services, JWT migration, and escape hatch in CI
* only write the sweep sentinel when a media volume is mounted
* tolerate homekit config chown failures in the go2rtc run script
* chown the s6 log pipe so non-root nginx can reopen /dev/stdout
* set HOME to /config for non-root services
* run smoke nginx -t and the write probe as the runtime user
* re-own the nginx shm cache on service restart
* discard stdout for the unprivileged smoke nginx -t
* unwrap hard-wrapped prose in the installation docs
* report progress during the ownership sweep
* document EXTRA_GROUPS as the only device access path for dropped services
* expand the non-root device access docs with diagnosis steps and udev rules
* document network storage ownership and the remaining detector hardware
* skip lost+found during the ownership sweep
* hand /tmp/cache to the runtime user before services start
* make bundled models readable by the runtime user
* reload nginx by signaling the master instead of parsing its config as root
* harden root writes into unprivileged-owned paths
Restrict the sweep sentinel to a mount at or below /media/frigate so a
parent /media mount cannot bless a later-shadowed volume. Rebuild
/tmp/nginx root-owned each start so root's cp and tempio writes cannot
follow a symlink an unprivileged nginx planted in the previous run.
* collapse the duplicated sentinel comment
* add a service-runs-as-root helper for granular root services
* validate FRIGATE_ROOT_SERVICES and fail fast on unknown names
* let services listed in FRIGATE_ROOT_SERVICES skip the privilege drop
* record the root-services mode in the sentinel and sweep small trees each boot
* cache the runtime ids in the ownership helper
* chown recordings, previews, and exports to the runtime user at create
* chown the database files after init
* recommend FRIGATE_ROOT_SERVICES in the bandwidth stats warning
* assert granular root services in CI
* document FRIGATE_ROOT_SERVICES
* own every directory level created for a recording segment
* clear the cached runtime ids when ownership tests finish
* skip missing media paths in the per-boot ownership sweep
* clarify granular root services docs
* clean up
* install acl for device access grants
* grant runtime users access to mapped device nodes at boot
* assert device access grants in CI
* document automatic device access grants
* stop telling users device access needs host side setup
* clarify the non-root docs
* link the migration script to the repo
* group the manual device setup under one section
* harden against symlink attacks
/config is owned by the unprivileged runtime user after the ownership sweep, so root operations on files there could be redirected by a planted symlink.
- go2rtc HomeKit setup: replace the root yq/jq normalization and chown with an O_NOFOLLOW helper (prepare_homekit.py), so a symlink at go2rtc_homekit.yml can't redirect a root write or chown onto another file
- go2rtc binary override: ignore /config/go2rtc whenever the service runs as root, so a planted binary can't exec as root under FRIGATE_ROOT_SERVICES
- sweep sentinel: read and write it through safe-sentinel, which trusts only a root-owned regular file and never follows a symlink, so it can't be forged to skip the migration or symlinked to clobber a root file
- ownership sweep: chown with -execdir so a parent directory swapped for a symlink mid-walk can't redirect the chown out of the volume
- validate inputs: restrict DEVICE_ACL_PATHS to /dev, require nonzero numeric EXTRA_GROUPS, and reject PUID/PGID that collide with the go2rtc ids
- docs: correct the TLS key ownership note to match what actually happens
* tweak docs
* stop the ownership sweep chasing entries other mechanisms own
* keep custom binaries out of root services only under granular root
* Create frigate and go2rtc runtime users in the image
* Add single fix-ownership helper for volume permission migration
* Add init-usermod oneshot for PUID and PGID remapping
* Chown newly created runtime directories to the frigate user
* Run sentinel-guarded ownership sweep during prepare
* Add host-side volume permission migration script
* Guard log directory ownership for user-mode startup
* Fall back to plain s6-log when running without root
* Assert PUID remapping and sweep sentinel in CI smoke test
* Skip the ownership sweep in the devcontainer
* Pin FRIGATE_RUN_AS_ROOT in ownership tests
* Do not record the sweep as complete when a chown failed
* Validate PUID and PGID in the migration script
* Treat a failed ownership scan as an incomplete sweep
* Reject PUID and PGID of 0 during remapping
* Handle symlinks, dry runs, and sentinel write failures in the sweep
* Treat an absent sweep root as an incomplete sweep
* Verify s6-overlay downloads against pinned checksums
* Verify go2rtc download against pinned checksums
The v1.9.14 release publishes no checksums file, just the bare per-platform binaries, so these digests come from a one-time fetch rather than upstream. That pins the artifact against later substitution, which is the realistic threat for a version we stay on for months, but it does not verify the original download. The stage moves from `ADD --link` to a script because `ADD --checksum` can't express an architecture-dependent URL.
* Verify main image downloads against pinned checksums
Covers everything the main image downloads on the default path: tempio, the hailort runtime tarball and wheel, the six ffmpeg builds, the libedgetpu deb, and the thirteen Intel driver debs. The hailort tarball was streamed straight into `tar`, which can't be verified before extraction, so it downloads to `/tmp` first. The three ffmpeg blocks per arch collapse into one `install_ffmpeg` helper since they only differed by URL and install dir, and the Intel debs go through a `fetch_intel_deb` helper for the same reason.
The Intel debs are the ones that mattered most here. They're installed as root with `dpkg` on the default amd64 path and had no verification at all. compute-runtime publishes a `ww<week>.sum` asset with every release and npu-driver published `checksum.sha256` on v1.19.0, so those eight digests came from upstream rather than from us. intel-graphics-compiler and level-zero publish none, so those five and everything else here come from a one-time fetch, which pins the artifact against later substitution but doesn't verify the original download. The comment above the map says which is which and how to refresh them, since npu-driver has stopped publishing sums since v1.19.0 and that provenance won't survive the next bump.
Still unpinned: `get-pip.py`, which is a rolling URL where a digest would just break the build on pypa's next edit, and the per-variant artifacts for Axera, Synaptics, and Jetson. apt repositories are out of scope since apt already verifies signatures.
* Restrict generated TLS key permissions
OpenSSL 3.x already writes the key at 600 on its own, so this pins the guarantee rather than fixing an observed leak: the mode no longer depends on the openssl version or the umask the service happens to start with. Only the generated pair is touched. User-mounted certs take the other branch and are never chmod'd, which matters when they're mounted read-only.
* Add security headers and server_tokens off
Adds `X-Content-Type-Options: nosniff` and `Referrer-Policy: strict-origin-when-cross-origin`, and turns off nginx version disclosure.
No `X-Frame-Options` and no CSP `frame-ancestors`. HA's Webpage card and iframe panels frame Frigate's own address cross-origin, and either header would break them silently with nothing in Frigate's logs to explain it. Ingress is same-origin and would survive `SAMEORIGIN`, but Frigate can't tell the two apart from inside the container. `security_headers.conf` is a plain file in the image rather than a generated one, so anyone who does want framing restrictions can bind-mount it.
`add_header` doesn't inherit into a block that declares its own, so the include goes in per block, all nine of them, including the four nested static-asset locations that serve the JS bundles. Those are the ones nosniff actually matters for.
The run script now reads `get_nginx_settings.py` once into a variable instead of shelling out per template. That script imports the frigate config machinery, which is noticeable on an SBC.
Not fixed here: `listen.conf` is included at server level and carries `Strict-Transport-Security`, so those same nine blocks already drop HSTS under TLS today. Folding it into this file would change existing TLS behavior on nine paths, so it needs its own PR.
* Restrict go2rtc config file permissions
* Log failed login attempts with source address
Failed logins returned a bare 401 and left nothing behind, so credential stuffing was invisible unless you were already watching nginx access logs. Both failure branches now log a warning with the attempted username and the client address.
The address comes from `get_remote_addr()`, the same helper the login rate limiter keys on, so the two agree on who the client is and the trusted-proxy handling is consistent. Logging a raw `x-forwarded-for` instead would let an attacker forge the source address in the very log line meant to catch them.
The response is unchanged and identical either way. Which factor failed is only visible in the log, never to the client, and the password is never logged.
* Recommend least-privilege container options in install docs
The compose generator pushed `privileged: true` into every file it produced, no matter what hardware you picked, and it's the default tab on the install page so it's what most people copy. It now emits `security_opt: no-new-privileges:true` instead, and only adds `privileged: true` for hardware that actually needs it, with the reason inline. MemryX is the only one today, since it needs to reach the max-manager. Rockchip and Synaptics only want privileged during initial setup and their documented end state is device mappings, so neither gets it.
`no-new-privileges` merges into the same `security_opt` block as any device-specific entries, so Rockchip still gets its `apparmor=unconfined` and `systempaths=unconfined` without a duplicate key.
The static example now has `privileged` commented out, and there's a short section on the options worth adding, with a note that `cap_drop: ALL` breaks `telemetry.stats.network_bandwidth` since nethogs needs NET_ADMIN/NET_RAW.
* Add amd64 container smoke test to CI
Boots the built amd64 image against a minimal config and asserts the two security headers, that the Server header no longer carries a version, that no frame-ancestors is present, that nginx accepts its own config, and the two file modes. This is also the harness the rest of the hardening work extends.
The two negative assertions are written as `if grep; then exit 1; fi` rather than `! grep`. Bash exempts a negated command from `set -e`, so the `!` form would have passed even with the version and frame-ancestors both present, which is the opposite of what a regression net is for.
* Move openai specific workaround so it doesn't apply to other providers
* Fix gemini tool calling
* Improve efficiency of frame listing for previews
* debug replay fixes
- initial selection without changing the radio button in the dialog would select 1 hour (rather than 1 minute)
- use CLIPS_DIR instead of CACHE_DIR so that longer replay clips don't cause tmpfs cache overflows
* don't re-render the tracking details overlay on every video time tick
* change pinned to planned
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* basic e2e frontend test framework
* improve mock data generation and add test cases
* more cases
* add e2e tests to PR template
* don't generate mock data in PR CI
* satisfy codeql check
* fix flaky system page tab tests by guarding against crashes from incomplete mock stats
* reduce local test runs to 4 workers to match CI
* mobile button spacing
* prevent console warning about div being descendant of p
* ensure consistent spacing
* add missing i18n keys
* i18n fixes
- add missing translations
- fix dot notation keys
* use plain string
* add missing key
* add i18next-cli commands for extraction and status
also add false positives removal for several keys
* add i18n key check step to PR workflow
* formatting
* Add node/npm version config to package.json
* Bump npm version/fix node version format
* Version range
* Use package.json for github actions node version
* Unification
* Move it all to the bottom
* Remove this
* Bump versions in docs
* Add volta config here too
* Revert changes
* Revert this
* [Init] Initial commit for Synaptics SL1680 NPU
* add a rough detector which is testing with yolov8 tflite model.
* [Feat] Add dependencies installation in docker build
- Add runtime library and wheels installation in main/Dockerfile
- Add model.synap(default model, transfer from mobilenet_224full80) in docker/synap1680
* [Update] Remove dependencies installation from main Dockerfile
- remove deps installation from Dockerfile
- add dependencies installation and split wheels, deps stage in synap1680 Dockerfile
* Refactor synap detector to more closely match other implementations
* [Update] Add model path configuration check
* [Update] update ModelType to ssd
* [Update] Remove unuse script
- install_deps.sh has already been executing in deps download stage
- Dockerfile.toolchain is for testing to extract runtime libraries from Synaptics toolchain
* [Update] update Synaptics SL1680 setup description
* [Update] remove install_synap1680
- The deps download and installation is existed in synap1680
* [Fix] update document content
* [Update] Update detector from synap1680 to synaptics
This update is in order to make the synaptics SL-series NPU detector more general.
- Fix detector `os` module not import bug
- Update detector type `synap1680` to `synaptics`
- Update document description `SL1680` to `Synaptics` only
- Update docker build content `synap1680` to `synaptics`
* [Fix] Update configuration document
* Update docs/docs/configuration/object_detectors.md
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* [Update] Update document content and detector default layout
- Update object_detectors document
- Update detector's default layout
- Update default model name
* [Update] Update object detector document content
* [Fix] Fix InputTensorEnum not defined error
- import InputTensorEnum from detector_config
* [Update] Update detector script coding format
* [Update] Update synaptics detector coding format
* [Update] Add synaptics ci workflow
* [Update] update synaptics runtime libs download path
- Fork Synaptics astra sdk repo and put the runtime lib package on it
- Frigate team can update this download path later
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Install peewee type hints
* Models now have proper types
* Fix iterator type
* Enable debug builds with dev reqs installed
* Install as wheel
* Fix cast type
* Update vite
* Update LuIcons
* Update radix packages
* Fix other icons
* Use correct node version
* Remove superfluous web build on python tests
* Move web build to test
* Simplify rocm install and update to 6.3.1
* Build out more necessary packages
* Update to 6.3.3
* Set bake version
* Fix typo
* Ensure NHWC is used
* Reset dev changes
* Write to cache
* Get stats for embeddings inferences
* cleanup embeddings inferences
* Enable UI for feature metrics
* Change threshold
* Fix check
* Update python for actions
* Set python version
* Ignore type for now
