* don't display audio transcription provider message as health notice
* show remote provider for audio transcription in health pane
* adjust trigger and notifications messages to be consistent with the rest of the settings UI
* disable save buttons when there are no changes in config editor
* fix audio manager crash when a camera is added at runtime
The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update.
`AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors.
* fix stationary max_frames dropping other tracked objects
When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update.
* fix test
* fix skip_motion_threshold permanently disabling motion detection
The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating.
Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back.
* dump ffmpeg logs on every restart
The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`.
* dump ffmpeg logs once per restart
The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section.
* keep all logpipe dumps consistent
* check for a valid frame before using its shape
With the camera offline, no preview frame, and `camera-error.jpg` missing, `latest_frame` read `frame.shape` before its `frame is None` check, so it raised `AttributeError` and answered 500 with a traceback instead of the intended "Unable to get valid frame". The check now runs first.
* fix the has_clip self-heal for events with no recordings
`vod_event` looked for a `(body, 404)` tuple, but `vod_ts` returns a `JSONResponse`, so the check never matched and an old event whose recordings are gone kept offering a clip that can't play. It now checks the response status code.
* return 403 for a snapshot or thumbnail on another camera
The broad `except Exception` handlers in `event_snapshot` and `event_thumbnail` caught the `HTTPException` from `require_camera_access`, so a restricted user asking for another camera's snapshot got a 404 instead of a 403, and for an object still being tracked the snapshot was rendered before the check ran. Both endpoints now look up the event and check access in their own block, the way the other endpoints do, so a denial propagates.
* find DST transitions to the second
`get_dst_transitions` probed the offset once every 24 hours from the start time and reported a change at the first probe after it, up to a day late, so events, review items and recordings near a transition were grouped into days with the old offset. A transition after the last daily probe wasn't found at all. The end of the range is probed too now, and a probe that sees the offset change bisects the interval to the second of the transition.
* don't run page shortcuts for keys a dialog already handled
Radix dismisses a dialog on Escape from a capture-phase keydown listener and calls `preventDefault()` without stopping propagation, so `useKeyboardListener` still ran the page's Escape shortcut: cancelling the delete dialog in the face library or a classification model also cleared the whole selection. Keys another shortcut hook handled still get through, since their listener order changes with every render.
* fix train image filtering for a class with a dash
The backend writes a class with a `-` as `_` in train file names, since it splits those names on `-`, while a dataset folder keeps the dash. Filtering the Train grid by `half-open` compared it with `half_open` and hid every attempt. Both sides are normalized the same way now.
* don't edit a chat message while a reply streams
The edit button stayed active while a reply streamed. `submitConversation` returns early while loading, but the message bubble still closed its editor, so the edit was silently lost. The edit button is hidden while a reply streams, and an editor that's already open keeps its draft with send disabled until the reply ends.
* fix restart failing under non-root
restart_frigate() called psutil.Process(1).terminate() to signal s6-svscan, but s6-svscan runs as root while frigate runs as uid 1000, so the call raised AccessDenied. That exception escaped every caller: the UI restart button dropped its websocket client, MQTT restart and Save & Restart just logged and did nothing, and the watchdog crashed its own monitoring thread on a dead detector. This catches AccessDenied and falls through to the existing SIGINT branch, which exits the process for s6 to restart it.
* show runtime overrides in the settings form
The settings form read a camera section's saved config value, but its dependent warnings (audio transcription requiring audio detection, snapshots requiring detect, etc.) read the live config instead. A runtime toggle from the live view, MQTT, or an active profile can turn a section off without touching yaml, and that override persists across restarts, so the Enable switch showed on while the warning said the feature wasn't enabled. This adds an "Overridden (Live)" badge to any field whose live value differs from what's saved, and swaps the affected warnings to runtime-specific wording when a runtime override is the actual cause instead of the config.
* fix mobile overflowing icons in system due to new health pane
* fix genai settings keeping a stale model and dropping roles after save
Switching a GenAI entry's provider left the previous provider's model selected, so saving wrote a model the new provider doesn't serve. llama.cpp can't find that model in `/v1/models`, so the backend reported every capability as false for the entry, and once the save refetched `genai/models` the roles widget stripped `transcribe` from the form on its own. The section showed unsaved changes right after saving, and saving again would have dropped the role. Switching provider now clears the model, and the roles widget only strips a role for a model or provider picked in the form, since the entry-level capability flags only describe the saved model. A selected role stays visible when the provider can't confirm it, so it can still be switched off. The llama.cpp model list also no longer repeats a model whose alias matches its id, which is what `--alias` produces.
* close onvif sessions on shutdown
`OnvifController.close()` only stopped its event loop, so the aiohttp sessions each `ONVIFCamera` holds and the `_poll_config_updates` task were left to be garbage collected during interpreter shutdown, when their warnings can no longer be logged. Every restart ended with a run of `Unclosed client session` and `Task was destroyed but it is pending!` logging errors, which only became visible once restart started exiting the process itself under non-root. `close()` now closes each camera's client and cancels the tasks on the loop before stopping it.
* fixes
* fixes
* Add support for running transcription with GenAI
* Improve audio joining
* Fix GenAI model capability reporting
* Support language correctly
* Migrate existing users to keep english selected
* Fix models
* Fix tests
* Fix accepted null model
* Handle slwo providers
* Implement annotated frames mode for GenAI reviews to improve models with lacking temporal understanding
* Updates
* Improve debug sharing
* Do not number objects
* Fix assumptions
* Remove unhelpful content
* Improve object data sent as part of prompt
* Cleanup ollama dumbness
* Bind db
* Fixes
* Cleanup
* update date-fns, i18next, react-dropzone, react-markdown and @types/node
react-i18next 17 peers `i18next >= 26.2.0`, so the two move together. react-day-picker already depends on date-fns 4, so date-fns now dedupes to a single copy. react-dropzone 20 declares `node >=22` in `engines`, but npm only warns on Node 20 and nothing in the build needs Node 22.
* update js-yaml, @hookform/resolvers and prettier
js-yaml 5 has no default export, so `DictAsYamlField` imports `dump`, `load` and `YAMLException` by name. @hookform/resolvers 5 types `zodResolver` with the schema's input and output types separately, and fields with defaults are optional on input, so the zone and classification model forms pass both types to `useForm`. zod's range now starts at 3.25, which resolvers 5 requires.
* format with prettier 3.9
* use the camera's model for the lpr vehicle check
`FrigateConfig.model` became `models[]` in the detector refactor, so this didn't compile on 0.19. Each camera has its own detector/model pair now, so the check resolves the camera's scene with `getModelForCamera` instead of looking at every model.
* use camera config model
* fix export test
Allow audio classes to be grouped under a shared configured label.
Keep audio overrides separate from object labels and retain only the highest-scoring grouped detection.
Refs #23967
* add sub stream recording with adaptive quality playback
Optionally record a second, lower bitrate stream alongside the main
recording stream via a `record_sub` input role and `record.sub` config block, with its own retention windows.
Recordings rows now carry the stream type plus the media details needed to serve both streams from one manifest: video codec, audio presence, audio codec and rate, and a record-time keyframe index.
Playback resolves coverage across both streams and merges them into a single VOD sequence, falling back to a discontinuity manifest with per-clip init segments when the media signatures differ. The player exposes a quality selector, and an auto governor picks the stream from stall time, bandwidth, codec support, and the save-data hint.
* fix tests and i18n
* Add combined motion and object Birdseye mode
Add a motion_objects mode that keeps Birdseye active when motion is detected or a confirmed tracked object is present, including stationary objects.
Wire the mode through configuration, runtime commands, API schemas, documentation, and UI labels. Exclude false-positive trackers and add regression coverage for Birdseye activation and MQTT validation.
* Refactor Birdseye activity types as booleans
Replace combination-specific Birdseye modes with composable boolean activity types for motion, active objects, stationary objects, and continuous display.
Preserve legacy single-mode configuration and MQTT inputs, support canonical comma-separated MQTT combinations, and allow scalar YAML values to be replaced by nested settings through the config API.
* Preserve OpenVINO config translations
Regenerate the configuration translations with the OpenVINO detector schema available so the unrelated production detector labels remain intact.
* Preserve partial Birdseye mode overrides
Allow an empty activity selection with a canonical NONE MQTT state so partial camera and profile overrides can disable inherited flags without failing validation.
Add regression coverage for camera and profile inheritance, document the NONE contract, and keep the generated schema fixture scoped to Birdseye.
* Address Birdseye activity review feedback
Move scalar mode compatibility into the 0.18-1 config migration and reject empty activity selections instead of publishing a NONE state.
Pass activity signals through a frozen dataclass, preserve existing active-object tracker behavior, and require confirmed stationary objects. Revert the generic YAML mutation and cover migration, inheritance, MQTT, and activation regressions.
* Move Birdseye migration to 0.19
Use the 0.19-0 configuration revision for converting scalar Birdseye modes to composable activity flags, and update the migration regression coverage accordingly.
* Remove Birdseye migration test
Drop the dedicated config migration test as requested during review while retaining the 0.19-0 migration implementation.
* run lpr on more vehicle types by default
before, a config change to attribute_map was required
* logging tweaks
* remove arg
* use attributes for frontend check
* docs
* only check thumbnail attributes the object can have
* widen the logger name field in the per-process log level settings
* add details to timestamp error faq
* tweak genai docs
* tweak vector language
* Combine Qwen3.5 and Qwen3.6 listings
* fix openvino yolox detector crashing on every detection
The intermediate (N, 7) array in the yolox branch shadowed the pre-allocated (20, 6) detections buffer, so writing a detection into it raised "could not broadcast input array from shape (6,) into shape (7,)" on the first frame with anything above the confidence threshold. An empty frame also returned a (0, 7) array instead of the (20, 6) buffer.
Regressed in #13794, which renamed the intermediate from dets to detections as part of a cspell cleanup. Broken since 0.15.0.
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* resolve zone friendly names against the correct camera
* Improve handling of zone names in chat prompt
* show a numeric keyboard for numeric config form fields on mobile
* Specify english only for semantic search tool when model is JinaV1
* resolve export hwaccel args global value against the correct config path
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* slightly darken bg-card
* change menu label
* move snapshot retain out of advanced fields
* add new ui options for collapsibles
* backend title and description
* remove unused snapshot retention field
* update reference config
* remove further references to snapshots retain.mode
* update e2e mock data to remove deprecated fields
* remove scream audio label
scream was never mapped to anything in frigate's custom labelmap, yell is used everywhere
* document common audio labels
* deprecate ffmpeg 5
* language tweak
* add field message to recommend presets instead of manual hwaccel args
* add guidance to docs on choosing a detect fps
* refactor go2rtc docs
* clarify go2rtc language in live
* add export docs
* Move around config items to reflect reference config is now for advanced users
* Remove outdated ipv6 section
* Fix broken links
* live usage docs
* review usage docs
* history usage
* explore usage
* add usage sidebar and move related text to usage sections
* update links
* update live
* move exports to usage
* fix anchors
* Make starts of usage pages consistent
* refactor network config
* Adjustments for review
* Add AI details to history page
* describe alerts vs detections in review usage
* simplify
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* serialize OpenVINO inference per process to prevent concurrent-inference segfault
* clean up
* add max scaling meta to login page
* add more detect section field messages
* fix icon layout in settings field messages
* tweak edit icon color
* add ptz presets and default role widgets
* language tweaks
* fix width in triggers view
* tweak iOS PWA message in notifications settings
* deprecate ui.date_style and ui.time_style
these have been unused since date/time formatting has been pushed to i18n
* add config migrator to remove date_style and time_style
* remove date_style and time_style from reference config
* fix camera list scrolling in state classification wizard on mobile
* add review padding to explore debug replay api calls
* add semantic search model size widget
disables model_size select with n/a text when an embeddings genai provider is selected
* regenerate zone contours and per-zone filter masks on detect resolution change
* treat null as a clear sentinel in buildOverrides so nullable field edits don't snap back
* extract replay config sheet to new component
* add validation and messages for detect settings
* unlink shm frames when camera is removed
* drop stale shm cache refs when cached segment is too small for requested shape
* skip new-object frame cache write when current_frame is unavailable
* add tests
* use setdefault when adding a new camera
Multiple subscribers in the same process each unpickle the ZMQ payload independently and would otherwise write divergent Python objects to the shared cameras dict — leaving long-lived references (e.g. CameraState.camera_config) pointing at a copy that subsequent in-place mutations like apply_section_update can never reach. setdefault collapses everyone onto the first writer's object so attribute mutations propagate to every consumer in this process.
* rebuild ffmpeg commands on detect update
Rebuild the cached ffmpeg cmd so the next process spawn picks up new resolution/fps. Running cameras keep their existing cmd (ffmpeg_cmds is only read at process startup); replay cameras are recycled by CameraMaintainer to pick up the rebuilt cmd
* drop stale shm cache refs when cached segment size doesn't match requested shape
The cached SharedMemoryFrameManager reference can point at a segment whose
size no longer matches the requested shape — the segment was unlinked and
recreated at a different size in a camera add/remove cycle. This catches
both a resolution increase (cached too small) and a decrease (cached too
large, pointing at an orphaned inode whose stale bytes would otherwise be
misinterpreted at the new shape, producing distorted/miscolored YUV frames).
After reopening, if the OS-level segment still doesn't match the requested
shape we're in a transient mid-recreate state — either the maintainer
hasn't allocated the new segment yet (size too small) or we opened a
pre-recycle segment (size too big). Either way, skip the frame and don't
cache the mismatched ref.
* recycle replay camera on detect update
* discard tracked-object state when detect resolution changes mid-session
When detect resolution changes mid-session every tracked object we hold
was localized against the old pixel grid. Their boxes no longer
correspond to anything in the new frame, and the `end` callback that
fires when their IDs disappear from the new detect process's detections
publishes those stale boxes to consumers (LPR, snapshot crop) that slice
the new frame and crash on empty arrays. Drop the tracked-object state
on a shape change so no stale boxes ever cross the CameraState boundary.
Belt-and-suspenders: also drop any incoming batch whose boxes exceed the
current detect resolution. These are in-flight queue entries from the
pre-recycle detect process that beat the new detect process to the
queue; processing them would re-introduce stale-resolution tracked
objects we just dropped above. The per-camera detect process clamps
legitimate boxes to detect.width-1 / detect.height-1, so any coord
beyond that is unambiguously stale.
* rebuild motion and object filter masks on detect resolution change
Apply the detect update first so frame_shape reflects the new resolution
before we rebuild dependents.
Motion's rasterized_mask is sized to frame_shape at construction. When
detect resolution changes we must rebuild RuntimeMotionConfig so the
mask matches the new frame size; otherwise consumers like the LPR
processor and motion detector hit a shape mismatch when they index
frames with the stale mask.
Same story for per-object filter masks — rebuild RuntimeFilterConfig at
the new frame_shape so the merged global+per-object masks they hold
match what they'll be indexed against.
* republish motion and objects on in-memory detect resize
A detect resolution change also invalidates the rasterized masks on
motion and per-object filters. apply_section_update has rebuilt them at
the new frame_shape; publish them too so other processes replace their
old values.
* add test
* frontend
* add refresh topic for camera maintainer recycle action
The maintainer's recycle branch is doing an action (recycle the camera)
in response to a section-level signal. Introduce a
CameraConfigUpdateEnum.refresh case as an explicit action signal — the
maintainer subscribes to refresh instead of detect, parallel with add
and remove. Publishers fire refresh alongside detect when a recycle is
needed; section-level subscribers keep their existing topic.
Since no main-process subscriber listens for detect anymore, the
refresh handler calls recreate_ffmpeg_cmds() explicitly so the shared
CameraConfig's ffmpeg_cmds is rebuilt before the new subprocesses
spawn.
* factor stale-resolution state drop into a CameraState method
* use monotonic clock for detector inference duration to prevent negative values from wall clock steps
* add ability to set camera's webui_url from camera management pane
* Gemini send thought signature
* Update docs
* copy face and lpr configs from source camera to replay camera
* add guard
* improve dummy camera docs
* remove version number
* fix stale field message after reverting a conditional form field
Routes field-level conditional messages through a dedicated React Context instead of merging them into uiSchema. RJSF's Form keeps state.uiSchema sticky across renders during processPendingChange (formData is updated, uiSchema is not), so a previously injected ui:messages array stays attached to a field even after the triggering condition flips back to false. Context propagation re-runs FieldTemplate directly on every provider value change, sidestepping that staleness.
* add semantic search field message to note that model_size is irrelevant when embeddings provider is selected
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* preserve user-set min_score on attribute filters instead of bumping any 0.5 value
use model_fields_set to distinguish "user explicitly set min_score" from "Pydantic applied the generic FilterConfig default of 0.5"
* add config test for attributes
* fix attributes frontend type
* add expanded hidden field context
* extend schema modification
* special case for attributes
* i18n for attributes
* handle dedicated lpr mode
* strip unrendered FilterConfig fields from attribute filter form data to fix validation errors
* start audio transcription post processor when enabled on any camera
* Fetch embed key whenever an error occurs in case the llama server was restarted
* mypy
* add tooltips for colored dots in settings menu
* add ability to reorder cameras from management pane
* add ability to reorder birdseye
* add reordering save text to camera management view
* Include NPU in latency performance hint
* Implement turbo for NPU on object detection
* hide order fields
* drop auto-derived field paths from camera value when unset globally
* use correct field type for export hwaccel args
* add debug replay to detail actions menu
* clarify debug replay in docs
* guard get_current_frame_time against missing camera state
* Implement debug reply from export
* Refactor debug replay to use sources for dynamic playback
* Mypy
* fix debug export replay source timestamp handling
* skip replay cameras in stats immediately
* broadcast debug replay state over ws and buffer pre-OPEN sends
- push debug replay session state over the job_state ws topic so the status bar reacts instantly to start/stop without polling
- fix child-effect-before-parent-effect race in WsProvider that silently dropped initial snapshot requests on cold load
* fix debug replay test hang
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add embedded mode to BaseSection so parents can host the save action
* add optional action slot to current Frigate+ model summary
* add w-full to action slot flex wrapper for explicit width contract
* i18n
* merged detectors and model settings view
* fix document title
* Embed detector form in merged settings view
* add detection model card with tabs and custom model embed
* add Frigate+ model selector with filter popover to merged page
* Add mismatch banner and gate save on detector and model compatibility
* Wire atomic save, restart toast, and undo on detectors and model page
* Clear child pending data on undo
* route merged detectors and model view in settings
* trim Frigate+ page to account-only and remove old detection model view
* basic e2e
* Fix unsaved-changes guard, custom path leak, and post-failure cache resync
* Rename to Detectors and model, float Modified badge, use ConfigMessageBanner for mismatch
* Hide Plus/Custom tabs when Frigate+ is not enabled
* Detect active Plus model via model.plus.id instead of path prefix
* Sync state back to snapshot when child form un-modifies and remount on undo
* Always require restart on save since model changes also need one
* Wrap Frigate+ model selector in SplitCardRow with label and description
* rename tab
* update docs
* sync top-level model with default detector's resolved model
when the user doesn't define a top-level `model:` block, `FrigateConfig.model` stayed at pydantic field defaults (320×320, /labelmap.txt) while the per-detector model picked up `DEFAULT_MODEL` for openvino on cpu (300×300, coco_91cl_bkgr.txt introduced in #23127), causing `RemoteObjectDetector` to fail with "buffer is too small for requested array" because the SHM was sized from the per-detector model but mapped using the top-level one. After the detector loop, copy the first detector's resolved model up to `self.model` so both sides agree on dimensions and labelmap
* revert to cpu detector by default
use openvino cpu for new configs only
* add defaults
* improve scroll handling for non-modal DropdownMenu in classification and face selection dialogs
* clean up
* fix incorrect key capitalization
* fix profile array overrides not replacing base arrays
don't use lodash merge(), it does positional merging and an empty source array doesn't override the destination, and shorter arrays leak destination elements through.
backend is unaffected, so the saved config and actual backend functionality was right
* only show audio debug tab when audio is enabled in config
* move apple_compatibility out of advanced
* remove retry_interval from UI
99% of users should never be changing this
* hide switch in optionalfieldwidget if editing a profile
* add override badges for cameras and profiles
collect shared functions into the config util and separate hooks
* Use new models endpoint info to determine modalities
* clarify language
* fix linter
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* respect section hiddenFields when detecting config overrides
* change audio events to audio detection to match docs
* add field messages for object and review genai
* add more config messages
* more messages
* add guard to prevent race when adding camera dynamically
* fix duplicate websocket messages from zombie connection under react strict mode
detach ws event handlers before close() in WsProvider cleanup so a CONNECTING socket's deferred onclose can't schedule a reconnect after the next mount resets the unmounted guard, which was spawning a second live ws and duplicating every message
* fix double event publishes for stationary objects with attributes
* hide camera overrides badge from system sections
* show empty card on camera metrics page when no cameras are defined
* fix enabled camera state switch after adding via wizard
Cameras added mid-session have no WS state until the dispatcher publishes camera_activity (which only happens on a fresh onConnect). Fall back to the config's enabled value so the switch reflects reality immediately after the wizard closes.
* guard camera enabled access
console would throw errors after adding via camera wizard
* fix useOptimisticState dropping debounced setState under StrictMode
* use openvino on cpu as default model
- faster than tflite on cpu
- add to default generated config
* use an enum for model_size
the frontend will then render this as a select dropdown because of the changes in the json schema
* i18n
* sync object filter entries with tracked labels in camera config form
Filter sub-collapsibles in the camera Objects section are driven by `filters` dict keys, but profile merges and live track-switch edits don't add matching entries, so newly tracked labels (like from a profile override) had no collapsible. Synthesize default filter entries from `track` in the form data so every tracked label renders a collapsible; baseline data also gets the synthesized entries, so save payloads are unchanged.
* revalidate raw paths cache after config save so CameraPathWidget shows fresh credentials
* fix test
* restore masked ffmpeg credentials when persisting camera config
* formatting
* rebuild ffmpeg commands when enabling recording for the first time
Toggling record.enabled from the config UI updated the in-memory config but left ffmpeg running with its original command, so the record output args were never wired in and nothing landed in the cache for the maintainer to move. The record config update now rebuilds ffmpeg_cmds when enabled_in_config transitions, and the camera watchdog restarts ffmpeg on a false to true transition so the record output gets wired in. MQTT toggles, which only flip record.enabled at runtime, are unaffected and continue to work via the maintainer's drop/keep gate.
* keep record toggle switch in single camera view disabled until enabled in config
* fix override detection for sections unset in the global config
Override badges and the blue dot now compare against schema defaults for sections like motion that the API serializes as null when omitted from the global YAML, instead of treating any populated camera config as an override
* add support for config-aware patterns in section hiddenFields
Section configs can now declare dynamic hidden-field entries as functions of the loaded config; objects.ts uses this to hide auto-populated attribute filters (DHL, face, license_plate, etc.) from the form, save flow, and override popover when those labels aren't user-settable
* siimplify object filters handling
live updating was getting very messy. users will just need to save once they enable a new object in order to see filters for that object
* tweaks
* update docs for new detector default
* make genai provider required and add special case for UI
prevent validation errors from appearing on initial creation of genai provider by setting the first option in the select dropdown as default
* use continuous expire date when loading reviews for recording cleanup
* reset heatmap filter when motion preview camera changes
* Add note about speed zones unit when enabled
* don't display fps warning for dedicated LPR cameras
* language tweaks
* allow changing camera type from management UI
* i18n
* fix ollama tool calling failure when conversation contains multimodal content from live frame tool results
* fix mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* apply annotation offset to frigate+ submission frame time
* fix broken docs links with hash fragments that resolve wrong on reload
* undo
* use recording snapshot for frigate+ frame submission from VideoControls
rather than a canvas grab/paint, which may not always align with an ffmpeg snapshot due to keyframes
* add more docs links
- display docs link for main sections on collapsible fields
* dialog button consistency
* backend
* frontend + i18n
* tests + api spec
* tweak backend to use Job infrastructure for exports
* frontend tweaks and Job infrastructure
* tests
* tweaks
- add ability to remove from case
- change location of counts in case card
* add stale export reaper on startup
* fix toaster close button color
* improve add dialog
* formatting
* hide max_concurrent from camera config export settings
* remove border
* refactor batch endpoint for multiple review items
* frontend
* tests and fastapi spec
* fix deletion of in-progress exports in a case
* tweaks
- hide cases when filtering cameras that have no exports from those cameras
- remove description from case card
- use textarea instead of input for case description in add new case dialog
* add auth exceptions for exports
* add e2e test for deleting cases with exports
* refactor delete and case endpoints
allow bulk deleting and reassigning
* frontend
- bulk selection like Review
- gate admin-only actions
- consolidate dialogs
- spacing/padding tweaks
* i18n and tests
* update openapi spec
* tweaks
- add None to case selection list
- allow new case creation from single cam export dialog
* fix codeql
* fix i18n
* remove unused
* fix frontend tests
* fix mobile export crash by removing stale iOS non-modal drawer workaround
* Remove titlecase to avoid Gemma4 handling plain labels as proper nouns
* Improve titling:
* Make directions more clear
* Properly capitalize delivery services
* update dispatcher config reference on save
* subscribe to review topic so ReviewDescriptionProcessor knows genai is enabled
* auto-send ON genai review WS message when enabled_in_config transitions to true
* remove unused object level
* update docs to clarify pre/post capture settings
* add ui docs links
* improve known_plates field in settings UI
* only show save all when multiple sections are changed
or if the section being changed is not currently being viewed
* fix docs
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add DictAsYamlField for genai provider and runtime options
* regenerate config translations
* chat tweaks
- add page title
- scroll if near bottom
- add tool call group that dynamically updates as tool calls are made
- add bouncing loading indicator and other UI polish
* tool call grouping
* Switch to a feature-based roles so it is easier to choose models for different tasks
* Fallback and try llama-swap format
* List models supported by provider
* Cleanup
* Add frontend
* Improve model loading
* Make it possible to update genai without restarting
* Cleanup
* Cleanup
* Mypy
* add ability to order subfields with dot notation
* put review genai enabled at the top of the genai subsection
* fix genai summary title truncation issue in detail stream
* set edgetpu for multi-instance
* improve error messages when mixing/matching detectors
* allow custom add button text via uiSchema
* clarify language in docs for configuring detectors via the UI
* add config messages to sections and fields
* add alert variants
* add messages to types
* add detect fps, review, and audio messages
* add a basic set of messages
* remove emptySelectionHintKey from switches widget
use the new messages framework and revert the changes made in #22664
* add review labels widget
* register widget and add to review section
* i18n
* add border to switches widget
* padding tweaks
* don't show audio labels if audio is not enabled
* add docs links
* ability to add custom labels to review
* add hint for empty selection in review labels and SwitchesWidget
* language consistency
* tweak language
* show validation errors in json response
* fix export hwaccel args field in UI
* increase annotation offset consts
* fix save button race conditions, add reset spinner, and fix enrichments profile leak
- Disable both Save and SaveAll buttons while either operation is in progress so users cannot trigger concurrent saves
- Show activity indicator on Reset to Default/Global button during the API call
- Enrichments panes (semantic search, genai, face recognition) now always show base config fields regardless of profile selection in the header dropdown
* fix genai additional_concerns validation error with textarea array widget
The additional_concerns field is list[str] in the backend but was using the textarea widget which produces a string value, causing validation errors.
Created a TextareaArrayWidget that converts between array (one item per line) and textarea display, and switched additional_concerns to use it
* populate and sort global audio filters for all audio labels
* add column labels in profiles view
* enforce a minimum value of 2 for min_initialized
* reuse widget and refactor for multiline
* fix
* change record copy preset to transcode audio to aac
