Allow audio classes to be grouped under a shared configured label.
Keep audio overrides separate from object labels and retain only the highest-scoring grouped detection.
Refs #23967
* add sub stream recording with adaptive quality playback
Optionally record a second, lower bitrate stream alongside the main
recording stream via a `record_sub` input role and `record.sub` config block, with its own retention windows.
Recordings rows now carry the stream type plus the media details needed to serve both streams from one manifest: video codec, audio presence, audio codec and rate, and a record-time keyframe index.
Playback resolves coverage across both streams and merges them into a single VOD sequence, falling back to a discontinuity manifest with per-clip init segments when the media signatures differ. The player exposes a quality selector, and an auto governor picks the stream from stall time, bandwidth, codec support, and the save-data hint.
* fix tests and i18n
* Add combined motion and object Birdseye mode
Add a motion_objects mode that keeps Birdseye active when motion is detected or a confirmed tracked object is present, including stationary objects.
Wire the mode through configuration, runtime commands, API schemas, documentation, and UI labels. Exclude false-positive trackers and add regression coverage for Birdseye activation and MQTT validation.
* Refactor Birdseye activity types as booleans
Replace combination-specific Birdseye modes with composable boolean activity types for motion, active objects, stationary objects, and continuous display.
Preserve legacy single-mode configuration and MQTT inputs, support canonical comma-separated MQTT combinations, and allow scalar YAML values to be replaced by nested settings through the config API.
* Preserve OpenVINO config translations
Regenerate the configuration translations with the OpenVINO detector schema available so the unrelated production detector labels remain intact.
* Preserve partial Birdseye mode overrides
Allow an empty activity selection with a canonical NONE MQTT state so partial camera and profile overrides can disable inherited flags without failing validation.
Add regression coverage for camera and profile inheritance, document the NONE contract, and keep the generated schema fixture scoped to Birdseye.
* Address Birdseye activity review feedback
Move scalar mode compatibility into the 0.18-1 config migration and reject empty activity selections instead of publishing a NONE state.
Pass activity signals through a frozen dataclass, preserve existing active-object tracker behavior, and require confirmed stationary objects. Revert the generic YAML mutation and cover migration, inheritance, MQTT, and activation regressions.
* Move Birdseye migration to 0.19
Use the 0.19-0 configuration revision for converting scalar Birdseye modes to composable activity flags, and update the migration regression coverage accordingly.
* Remove Birdseye migration test
Drop the dedicated config migration test as requested during review while retaining the 0.19-0 migration implementation.
* update homekit docs
* update dictionary
* preserve function names in production builds
adds only 162kb gzipped/450k unzipped to the bundle
* margin tweak
* fix maximum update depth exceeded when dragging the timeline handlebar
Dragging the handlebar, especially quickly or with fast direction changes, could exceed React's nested update limit and unmount the whole app, leaving a blank screen. Motion search was worst affected.
The drag loop committed a new time into React state on every animation frame. Edge auto-scrolling mutates scrollTop each iteration, so the value always differed and React's same-value bail-out never engaged, letting the update chain run to the limit of 50. Pace those commits to one per 100ms and flush the pending value on release, so the drop position is still exact. The handlebar position and label are written to the DOM directly and remain at frame rate.
useUserInteraction dispatched state on every scroll and touchmove event; only commit on the leading edge.
Motion search also passed fresh array literals for the timeline's events, motion events and unavailable ranges, giving the segment memo and the drag effect new dependencies on every render. Both views also passed an inline arrow for onHandlebarDraggingChange, which is an effect dependency that calls setState.
* Verify motion search jobs belong to the requested camera
* Apply persisted profile and runtime overrides before workers start
Worker processes are handed a copy of the config when they start and only learn about later changes from the config_updater broadcast, which is plain ZMQ PUB/SUB with no queue, ack, or retained value, so a message published before a subscriber has connected is dropped and never re-sent. The persisted profile and the runtime camera toggles were restored only by that broadcast, at the very end of startup, so a worker that lost the race kept its yaml values for the rest of the session: audio detection kept running on a camera whose audio had been toggled off, even though /api/config, the UI, and the runtime state file all showed it disabled. Split both restores into a config half and a publish half. ProfileManager.restore_persisted_profile_to_config() and Dispatcher.reapply_runtime_state_to_config() now run right after init_profile_manager(), before the first worker starts, so every worker is handed a config that already carries both layers. ProfileManager.restore_persisted_profile() and Dispatcher.restore_runtime_state() still run at the end of startup: the recording, review, and embeddings processes start before the dispatcher exists, so the broadcast remains their only channel, and MQTT needs the retained switch states. Both config passes have to stay after init_profile_manager(), which snapshots the config as the no-profile base that deactivation resets to.
* End timeline drags on touchcancel
/auth grants anonymous admin to any request whose X-Server-Port matches networking.listen.internal, but it read that port off the live config while nginx binds its listeners once at container start and never reloads them, so any path that swaps the running config could move the trusted port without nginx moving with it. Saving networking.listen.internal equal to the external port applied immediately despite the restart-required warning, which handed unauthenticated admin to everything reaching the external port. Snapshot the port at app creation and compare against that instead, and reject a config whose two listeners share a port number, which nginx would refuse to start with anyway.
* improve display of gpu graphs in system metrics
* docs tweaks
* Only hide cameras with ui.dashboard disabled from the All Cameras dashboard
The settings camera selector and zone editor also filtered on ui.dashboard, so hiding a camera from the dashboard made its zones and masks uneditable in the UI (GH 23870). Drop those filters and correct the field title, help text, and reference docs to describe what the option actually does
* hide cameras with ui.review disabled from the Motion tab and the review summaries
The Motion tab built its own camera list that never checked ui.review, so a hidden camera still got a preview tile, and its motion and overlap queries fell back to every allowed camera. The review and recordings summaries had the same gap: they are aggregate day counts that can't be filtered client side, so a hidden camera kept contributing to the severity tab counts and calendar indicators while its items were absent from the list. Filter the motion camera list on ui.review and query all four endpoints with the visible camera list instead of letting the backend default to all, and skip the summary queries until the config resolves so the counts don't briefly render as zero.
* Scope every review page query to the cameras visible in review
The segments and the summary counts were derived from different camera sets: the list was fetched for all cameras and filtered client side, while the summaries were fetched for the visible cameras only when no explicit camera filter was set. A ?cameras= link can name a camera hidden from review, which left the count above zero with an empty list, pinning the new items to review popover open and making the auto refresh effect loop. Intersect an explicit camera selection with the visible list rather than trusting it, pass that to the segment and summary queries alike, and drop the now redundant client side filter, which the raw segments handed to the history view were bypassing anyway.
* fix watchdog process restarts reverting to the boot config
/api/config/set parses a new FrigateConfig and swaps the API and dispatcher onto it, but FrigateApp.config was never rebound, so the watchdog factories rebuilt a crashed process from the config as of startup. Fix is to read through a ConfigHolder that the swap updates.
* fix birdseye camera overrides being clobbered by a global mode change
A global birdseye save published only the global object, leaving the output process to infer which cameras were inheriting by comparing against the previous global mode. That cannot tell an inherited value from an explicit one that happens to match, so it overwrote the override until a restart. Publish the per-camera values the config parse already resolved instead.
* Reject non-finite numbers in GenAI review descriptions
A model returning NaN for confidence or potential_threat_level slipped through the model_construct fallback, which skips validation, and was written into the review segment's JSON data. NaN is not valid JSON, so every subsequent /review request failed with "Out of range float values are not JSON compliant", blanking the review page for any time range containing the poisoned row.
* restore fused DetectionOutput in the OpenVINO SSD model conversion
* fix rgb swap issue for face dataset testing script
* preserve runtime camera toggles across config saves
Runtime toggles (camera on/off, detect, recordings, snapshots, audio) mutate the in-memory config and persist an override to .runtime_state.json. /api/config/set re-parses yaml into a fresh FrigateConfig and swaps it in, re-applying the yaml and profile layers but dropping the runtime layer, so a camera turned off from the dashboard came back on when an unrelated camera was saved. The workers were never notified, so it only appeared to come back: the UI streamed go2rtc while ffmpeg stayed stopped.
Extract the startup replay into Dispatcher.apply_runtime_state() and call it from config_set after the swap, re-layering the overrides and republishing them so workers and the UI reconverge.
Remove the broad clear_runtime_state() from ProfileManager.update_config, which is only ever reached from config_set: with a profile active, every save wiped every camera's overrides from disk. The broad wipe stays in activate_profile, where a real profile switch does invalidate the steady state. Saves still clear the keys they rewrote via clear_runtime_state_for_yaml_keys, so yaml wins where the two disagree.
* sync runtime config on camera delete and prune its overrides
Deleting a camera re-parsed yaml into a fresh FrigateConfig but only rebound app.frigate_config and genai_manager, never dispatcher.config (nor profile_manager, stats_emitter, or the runtime overrides). The API and the dispatcher then drifted onto different config objects until the next config save re-synced them, so the API reported surviving cameras with their yaml enabled state while the dispatcher still acted on their real runtime state.
Extract the config swap that config_set already does into a shared swap_runtime_config helper and call it from both sites, so every collaborator is rebound and the surviving cameras' runtime toggles are re-layered. Also drop the deleted camera's persisted overrides via a new clear_camera so a camera later added under the same name does not inherit them.
* Pin ruff
* Add python upgrade fixes
This enables python upgrade checks in ruff to look for deprecated types and patterns. This namely fixes:
- usage of deprecated `Typing` which is now built in
- some specific exceptions which are caught and have new aliases
Some specific UP checks were also ignored as they are stylistic / unimportant and likely to cause bugs
* Remove async blocking calls
Use asyncio.to_thread on two remaining blocking calls to fix hanging event thread loop. Enable this specific rule to block it in the future.
* Use proper logging mechanism
* Correctly format logs
* Raise with context
When raising an exception include the from context to improve debugging
* Cleanup
Resolve conflicts in the export pipeline where dev's job-queue refactor
met master's chapter-metadata and security work.
- Unify chapter support under ChaptersEnum (none / recording_segments /
review_items); the realtime stream-copy export selects the per-segment
or per-review-item builder by the camera's configured mode. Thread
chapters through ExportRecordingsBody -> _build_export_job -> ExportJob
-> RecordingExporter.
- Keep master's creation_time/comment export metadata and fix a
video_path duplication the textual merge introduced in the preview
command.
- Move the chapters request field to ExportRecordingsBody (the single
export endpoint) where it is actually honored.
Restore security fixes the automatic merge would have reverted:
- frigate/util/services.py: restore the #23493 rename to the public
is_go2rtc_arbitrary_exec_allowed so create_config.py's dynamic-source
exec guard imports and runs (the merge otherwise left a broken import).
- Preserve the export image-path ".." traversal check inside
_sanitize_existing_image, applied to single/custom/batch exports.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* slightly darken bg-card
* change menu label
* move snapshot retain out of advanced fields
* add new ui options for collapsibles
* backend title and description
* remove unused snapshot retention field
* update reference config
* remove further references to snapshots retain.mode
* update e2e mock data to remove deprecated fields
* remove scream audio label
scream was never mapped to anything in frigate's custom labelmap, yell is used everywhere
* document common audio labels
* deprecate ffmpeg 5
* language tweak
* add field message to recommend presets instead of manual hwaccel args
* add guidance to docs on choosing a detect fps
* republish MQTT switch states when a profile is activated or deactivated
* fix object mask default name when created from Explore tracking details
* tweak annotation offset max in UI
* optimize recordings/unavailable gap detection and drop empty motion activity buckets
* add tests
* add ptz presets and default role widgets
* language tweaks
* fix width in triggers view
* tweak iOS PWA message in notifications settings
* deprecate ui.date_style and ui.time_style
these have been unused since date/time formatting has been pushed to i18n
* add config migrator to remove date_style and time_style
* remove date_style and time_style from reference config
* fix camera list scrolling in state classification wizard on mobile
* resolve global record.export.hwaccel_args to fix phantom camera override
* auto-stop debug replay sessions after 12 hours
* docs tweaks
* add more tips to object classification docs
* tweak language
* Store hwaccel errors with timeout so it can retry
* Add error logs for Intel GPU stats
* add area
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add prop to disable id field
* disable id field when editing profile mask/zone
also, disable if the zone name already exists in required_zones or the base config is being edited and the id already exists on a profile
* add backend validation to reject profile-omly masks/zones
* add tests
* update docs
* tweak
* unlink shm frames when camera is removed
* drop stale shm cache refs when cached segment is too small for requested shape
* skip new-object frame cache write when current_frame is unavailable
* add tests
* use setdefault when adding a new camera
Multiple subscribers in the same process each unpickle the ZMQ payload independently and would otherwise write divergent Python objects to the shared cameras dict — leaving long-lived references (e.g. CameraState.camera_config) pointing at a copy that subsequent in-place mutations like apply_section_update can never reach. setdefault collapses everyone onto the first writer's object so attribute mutations propagate to every consumer in this process.
* rebuild ffmpeg commands on detect update
Rebuild the cached ffmpeg cmd so the next process spawn picks up new resolution/fps. Running cameras keep their existing cmd (ffmpeg_cmds is only read at process startup); replay cameras are recycled by CameraMaintainer to pick up the rebuilt cmd
* drop stale shm cache refs when cached segment size doesn't match requested shape
The cached SharedMemoryFrameManager reference can point at a segment whose
size no longer matches the requested shape — the segment was unlinked and
recreated at a different size in a camera add/remove cycle. This catches
both a resolution increase (cached too small) and a decrease (cached too
large, pointing at an orphaned inode whose stale bytes would otherwise be
misinterpreted at the new shape, producing distorted/miscolored YUV frames).
After reopening, if the OS-level segment still doesn't match the requested
shape we're in a transient mid-recreate state — either the maintainer
hasn't allocated the new segment yet (size too small) or we opened a
pre-recycle segment (size too big). Either way, skip the frame and don't
cache the mismatched ref.
* recycle replay camera on detect update
* discard tracked-object state when detect resolution changes mid-session
When detect resolution changes mid-session every tracked object we hold
was localized against the old pixel grid. Their boxes no longer
correspond to anything in the new frame, and the `end` callback that
fires when their IDs disappear from the new detect process's detections
publishes those stale boxes to consumers (LPR, snapshot crop) that slice
the new frame and crash on empty arrays. Drop the tracked-object state
on a shape change so no stale boxes ever cross the CameraState boundary.
Belt-and-suspenders: also drop any incoming batch whose boxes exceed the
current detect resolution. These are in-flight queue entries from the
pre-recycle detect process that beat the new detect process to the
queue; processing them would re-introduce stale-resolution tracked
objects we just dropped above. The per-camera detect process clamps
legitimate boxes to detect.width-1 / detect.height-1, so any coord
beyond that is unambiguously stale.
* rebuild motion and object filter masks on detect resolution change
Apply the detect update first so frame_shape reflects the new resolution
before we rebuild dependents.
Motion's rasterized_mask is sized to frame_shape at construction. When
detect resolution changes we must rebuild RuntimeMotionConfig so the
mask matches the new frame size; otherwise consumers like the LPR
processor and motion detector hit a shape mismatch when they index
frames with the stale mask.
Same story for per-object filter masks — rebuild RuntimeFilterConfig at
the new frame_shape so the merged global+per-object masks they hold
match what they'll be indexed against.
* republish motion and objects on in-memory detect resize
A detect resolution change also invalidates the rasterized masks on
motion and per-object filters. apply_section_update has rebuilt them at
the new frame_shape; publish them too so other processes replace their
old values.
* add test
* frontend
* add refresh topic for camera maintainer recycle action
The maintainer's recycle branch is doing an action (recycle the camera)
in response to a section-level signal. Introduce a
CameraConfigUpdateEnum.refresh case as an explicit action signal — the
maintainer subscribes to refresh instead of detect, parallel with add
and remove. Publishers fire refresh alongside detect when a recycle is
needed; section-level subscribers keep their existing topic.
Since no main-process subscriber listens for detect anymore, the
refresh handler calls recreate_ffmpeg_cmds() explicitly so the shared
CameraConfig's ffmpeg_cmds is rebuilt before the new subprocesses
spawn.
* factor stale-resolution state drop into a CameraState method
* render orphaned filter entries as collapsibles instead of the Key/Value editor
* Symlink for various AI files
* change replay confg dialog to platform aware sheet
* change agents title
* fix test
* tweak collapsible
* remove camera ui section in settings
no point to having it anymore with profiles and camera management settings
* fix admin response cache leak to non-admin users via nginx proxy_cache
* add model fetcher endpoint for genai config ui
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* preserve user-set min_score on attribute filters instead of bumping any 0.5 value
use model_fields_set to distinguish "user explicitly set min_score" from "Pydantic applied the generic FilterConfig default of 0.5"
* add config test for attributes
* fix attributes frontend type
* add expanded hidden field context
* extend schema modification
* special case for attributes
* i18n for attributes
* handle dedicated lpr mode
* strip unrendered FilterConfig fields from attribute filter form data to fix validation errors
* add embedded mode to BaseSection so parents can host the save action
* add optional action slot to current Frigate+ model summary
* add w-full to action slot flex wrapper for explicit width contract
* i18n
* merged detectors and model settings view
* fix document title
* Embed detector form in merged settings view
* add detection model card with tabs and custom model embed
* add Frigate+ model selector with filter popover to merged page
* Add mismatch banner and gate save on detector and model compatibility
* Wire atomic save, restart toast, and undo on detectors and model page
* Clear child pending data on undo
* route merged detectors and model view in settings
* trim Frigate+ page to account-only and remove old detection model view
* basic e2e
* Fix unsaved-changes guard, custom path leak, and post-failure cache resync
* Rename to Detectors and model, float Modified badge, use ConfigMessageBanner for mismatch
* Hide Plus/Custom tabs when Frigate+ is not enabled
* Detect active Plus model via model.plus.id instead of path prefix
* Sync state back to snapshot when child form un-modifies and remount on undo
* Always require restart on save since model changes also need one
* Wrap Frigate+ model selector in SplitCardRow with label and description
* rename tab
* update docs
* sync top-level model with default detector's resolved model
when the user doesn't define a top-level `model:` block, `FrigateConfig.model` stayed at pydantic field defaults (320×320, /labelmap.txt) while the per-detector model picked up `DEFAULT_MODEL` for openvino on cpu (300×300, coco_91cl_bkgr.txt introduced in #23127), causing `RemoteObjectDetector` to fail with "buffer is too small for requested array" because the SHM was sized from the per-detector model but mapped using the top-level one. After the detector loop, copy the first detector's resolved model up to `self.model` so both sides agree on dimensions and labelmap
* revert to cpu detector by default
use openvino cpu for new configs only
* add defaults
* sync filter entries with track and listen labels
- Auto-populate `audio.filters` from `audio.listen` instead of the full audio labelmap, matching how `objects.filters` is keyed by `track` (no longer need to populate the full audio labelmap, which was added in #22630)
- Synthesize the matching filter entries in the settings form on load so each track/listen label shows its collapsible after a profile is selected, since the backend's auto-populate only runs at config init
* translate main label for lifecycle description with attribute
* reject restricted go2rtc stream sources when added via api
* add env var check function
get_relative_coordinates() previously logged
"Not applying mask due to invalid coordinates. X,Y is outside ..."
without naming the camera, so on a multi-camera setup the user had
to guess which one to fix.
Add an optional camera_name kwarg with default "" (no behavior
change for existing callers). The global object-mask path in
FrigateConfig.validate_config passes camera_name=camera_config.name
since it already has it in scope, so legacy configs with absolute
pixel coordinates now get an actionable log line:
Not applying mask due to invalid coordinates for camera back.
9000,9000 is outside of the detection resolution 800x400.
Use the editor in the UI to correct the mask.
Existing wording is preserved verbatim except for the inserted
" for camera <name>" segment. Runtime behavior is unchanged.
Co-authored-by: Claude <noreply@anthropic.com>
* respect section hiddenFields when detecting config overrides
* change audio events to audio detection to match docs
* add field messages for object and review genai
* add more config messages
* more messages
* add guard to prevent race when adding camera dynamically
* fix duplicate websocket messages from zombie connection under react strict mode
detach ws event handlers before close() in WsProvider cleanup so a CONNECTING socket's deferred onclose can't schedule a reconnect after the next mount resets the unmounted guard, which was spawning a second live ws and duplicating every message
* fix double event publishes for stationary objects with attributes
* hide camera overrides badge from system sections
* show empty card on camera metrics page when no cameras are defined
* fix enabled camera state switch after adding via wizard
Cameras added mid-session have no WS state until the dispatcher publishes camera_activity (which only happens on a fresh onConnect). Fall back to the config's enabled value so the switch reflects reality immediately after the wizard closes.
* guard camera enabled access
console would throw errors after adding via camera wizard
* fix useOptimisticState dropping debounced setState under StrictMode
* use openvino on cpu as default model
- faster than tflite on cpu
- add to default generated config
* use an enum for model_size
the frontend will then render this as a select dropdown because of the changes in the json schema
* i18n
* sync object filter entries with tracked labels in camera config form
Filter sub-collapsibles in the camera Objects section are driven by `filters` dict keys, but profile merges and live track-switch edits don't add matching entries, so newly tracked labels (like from a profile override) had no collapsible. Synthesize default filter entries from `track` in the form data so every tracked label renders a collapsible; baseline data also gets the synthesized entries, so save payloads are unchanged.
* revalidate raw paths cache after config save so CameraPathWidget shows fresh credentials
* fix test
* restore masked ffmpeg credentials when persisting camera config
* formatting
* rebuild ffmpeg commands when enabling recording for the first time
Toggling record.enabled from the config UI updated the in-memory config but left ffmpeg running with its original command, so the record output args were never wired in and nothing landed in the cache for the maintainer to move. The record config update now rebuilds ffmpeg_cmds when enabled_in_config transitions, and the camera watchdog restarts ffmpeg on a false to true transition so the record output gets wired in. MQTT toggles, which only flip record.enabled at runtime, are unaffected and continue to work via the maintainer's drop/keep gate.
* keep record toggle switch in single camera view disabled until enabled in config
* fix override detection for sections unset in the global config
Override badges and the blue dot now compare against schema defaults for sections like motion that the API serializes as null when omitted from the global YAML, instead of treating any populated camera config as an override
* add support for config-aware patterns in section hiddenFields
Section configs can now declare dynamic hidden-field entries as functions of the loaded config; objects.ts uses this to hide auto-populated attribute filters (DHL, face, license_plate, etc.) from the form, save flow, and override popover when those labels aren't user-settable
* siimplify object filters handling
live updating was getting very messy. users will just need to save once they enable a new object in order to see filters for that object
* tweaks
* update docs for new detector default
* make genai provider required and add special case for UI
prevent validation errors from appearing on initial creation of genai provider by setting the first option in the select dropdown as default
* Rewrite intel GPU stats to use file descriptors instead of intel_gpu_top, leading to significantly better API for interaction and more accurate results
* Update tests
* Update docs
* Adjust approach
* Update strings
* add ui to camera config update topics enum
* add mqtt to camera config update enum
* ensure cleanup runs when an event end skips post-processing
* end any in-progress audio events when audio detection is disabled
we already end in-progress audio events when we disable a camera, but this mirrors that logic for specifically disabling audio detection
* Improve GenAI metadata
* fix invalid recording segment topic being misrouted to the valid handler
* Add confidence default to avoid unnecessary field causing issues
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add log when probing detect stream on startup
when users don't explicitly set detect.width and detect.height, we probe for them. sometimes the probe hangs (camera doesn't support UDP, like some Reolinks), so this log message will make that clearer
* add faq about probing detect stream
* fix stuck activity ring when tracked object transitions to stationary
* drop cache segments past retain cutoff regardless of retention mode
* add maintainer test
* backend
* frontend + i18n
* tests + api spec
* tweak backend to use Job infrastructure for exports
* frontend tweaks and Job infrastructure
* tests
* tweaks
- add ability to remove from case
- change location of counts in case card
* add stale export reaper on startup
* fix toaster close button color
* improve add dialog
* formatting
* hide max_concurrent from camera config export settings
* remove border
* refactor batch endpoint for multiple review items
* frontend
* tests and fastapi spec
* fix deletion of in-progress exports in a case
* tweaks
- hide cases when filtering cameras that have no exports from those cameras
- remove description from case card
- use textarea instead of input for case description in add new case dialog
* add auth exceptions for exports
* add e2e test for deleting cases with exports
* refactor delete and case endpoints
allow bulk deleting and reassigning
* frontend
- bulk selection like Review
- gate admin-only actions
- consolidate dialogs
- spacing/padding tweaks
* i18n and tests
* update openapi spec
* tweaks
- add None to case selection list
- allow new case creation from single cam export dialog
* fix codeql
* fix i18n
* remove unused
* fix frontend tests
* add DictAsYamlField for genai provider and runtime options
* regenerate config translations
* chat tweaks
- add page title
- scroll if near bottom
- add tool call group that dynamically updates as tool calls are made
- add bouncing loading indicator and other UI polish
* tool call grouping
* Switch to a feature-based roles so it is easier to choose models for different tasks
* Fallback and try llama-swap format
* List models supported by provider
* Cleanup
* Add frontend
* Improve model loading
* Make it possible to update genai without restarting
* Cleanup
* Cleanup
* Mypy
* add validator for detect width and height
require both or neither
* coerce semantic search model string to enum
Built-in model names (jinav1, jinav2) get converted to the enum, genai provider names that don't match stay as plain strings and follow the existing validation path
* formatting
* add review labels widget
* register widget and add to review section
* i18n
* add border to switches widget
* padding tweaks
* don't show audio labels if audio is not enabled
* add docs links
* ability to add custom labels to review
* add hint for empty selection in review labels and SwitchesWidget
* language consistency
* tweak language
* show validation errors in json response
* fix export hwaccel args field in UI
* increase annotation offset consts
* fix save button race conditions, add reset spinner, and fix enrichments profile leak
- Disable both Save and SaveAll buttons while either operation is in progress so users cannot trigger concurrent saves
- Show activity indicator on Reset to Default/Global button during the API call
- Enrichments panes (semantic search, genai, face recognition) now always show base config fields regardless of profile selection in the header dropdown
* fix genai additional_concerns validation error with textarea array widget
The additional_concerns field is list[str] in the backend but was using the textarea widget which produces a string value, causing validation errors.
Created a TextareaArrayWidget that converts between array (one item per line) and textarea display, and switched additional_concerns to use it
* populate and sort global audio filters for all audio labels
* add column labels in profiles view
* enforce a minimum value of 2 for min_initialized
* reuse widget and refactor for multiline
* fix
* change record copy preset to transcode audio to aac
Nicolas Mowen