* don't display audio transcription provider message as health notice
* show remote provider for audio transcription in health pane
* adjust trigger and notifications messages to be consistent with the rest of the settings UI
* disable save buttons when there are no changes in config editor
* fix audio manager crash when a camera is added at runtime
The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update.
`AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors.
* fix stationary max_frames dropping other tracked objects
When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update.
* fix test
* fix skip_motion_threshold permanently disabling motion detection
The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating.
Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back.
* dump ffmpeg logs on every restart
The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`.
* dump ffmpeg logs once per restart
The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section.
* keep all logpipe dumps consistent
fix duplicated styles, move fonts to src/assets/fonts for vite to bundle (nginx already rewrites correctly), and fix fast refresh for PreviewController, auth context/provider, and statusbar context
* update date-fns, i18next, react-dropzone, react-markdown and @types/node
react-i18next 17 peers `i18next >= 26.2.0`, so the two move together. react-day-picker already depends on date-fns 4, so date-fns now dedupes to a single copy. react-dropzone 20 declares `node >=22` in `engines`, but npm only warns on Node 20 and nothing in the build needs Node 22.
* update js-yaml, @hookform/resolvers and prettier
js-yaml 5 has no default export, so `DictAsYamlField` imports `dump`, `load` and `YAMLException` by name. @hookform/resolvers 5 types `zodResolver` with the schema's input and output types separately, and fields with defaults are optional on input, so the zone and classification model forms pass both types to `useForm`. zod's range now starts at 3.25, which resolvers 5 requires.
* format with prettier 3.9
* migrate web to eslint 10 flat config
ESLint 10 dropped `.eslintrc` support, so `.eslintrc.cjs` is replaced with `eslint.config.js` and the lint scripts no longer pass `--ext` or `--ignore-path`. typescript-eslint moves to 8, react-hooks to 7, and react-refresh to 0.5, and the unused jest and vitest-globals plugins are removed. Lint behaves as it did before: catch variables aren't checked, unused disable directives aren't reported, and rules newly added to the recommended sets are off until the code passes them. typescript-eslint 8 flags constants used only in `typeof`, so those are now exported, or replaced with a union type where the export would trip react-refresh.
* fix lint findings from the eslint 10 recommended rules
Remove the rule overrides from the flat config migration and fix what they were hiding. Unused catch bindings are dropped, 20 disable directives that suppressed nothing are removed (react-hooks 5.2 and 7.1.1 report identical exhaustive-deps findings with inline config ignored), dead initial values are dropped, short-circuit calls become if statements or optional calls, rethrown errors pass `cause`, and the disabled "No recordings" tooltip in `ReviewTimeline` is removed along with its memo and the `getRecordingAvailability` prop. The 3 react-refresh warnings for files that export contexts or classes are left for a later refactor.
* add import/export for camera group layouts and streaming settings
Camera group layouts and per-camera streaming settings are stored in the browser's IndexedDB, so they are tied to a single browser on a single device. Users with more than one device have to rebuild every group layout and re-pick every camera's stream settings by hand, and clearing browser data loses the work.
Add a Backup & Restore card to Settings > UI Settings that exports these settings to a JSON file and imports that file on another device. Import shows a confirmation dialog with per-section counts, switches for layouts, streaming settings, and UI preferences, and warnings about camera groups or cameras in the file that are not on this server.
Server-side storage is deliberately avoided. These are per-device presentation settings: a layout arranged for a desktop is wrong on a tablet, and continuous full-resolution streams that are free on a wired LAN are not on a phone. An explicit file moves settings only when the user chooses to move them.
Implementation notes:
- web/src/utils/uiSettingsTransfer.ts owns a registry of transferable IndexedDB keys. Each entry records whether the key is user-namespaced, matching which persistence hook wrote it, plus a zod schema for its value.
- Only registry-known keys are ever written, and only when their value passes that schema. The file format deliberately lets unknown keys survive parsing, so this filter is what prevents a hand-edited file from writing arbitrary storage keys or out-of-range values.
- Export falls back to the legacy un-namespaced key, because the username migration runs lazily on first mount of each owning hook.
- Streaming settings merge per group rather than replacing the whole map, so groups configured only on the receiving device survive.
- Import writes storage and then reloads, because useUserPersistence reads a key only on mount and StreamingSettingsProvider would otherwise write its stale in-memory state back over the import.
- playbackBandwidthEstimate, frigate-search-history, and live-layout are excluded: the first two are measurements and user data rather than preferences, and live-layout's default is derived from the device.
* merge imported streaming settings per camera instead of per group
* sort preview cameras in history by ui order
* sort cameras by UI order in various components for consistent display
* add no recordings faq
* fix link
* recording cache faq
* add link
* improve anchor naming in object detector docs
rather than #configuration-1, #configuration-2, etc
* use yaml instead of json for object detector docs
* fix anchor
* refactor go2rtc docs
* clarify go2rtc language in live
* add export docs
* Move around config items to reflect reference config is now for advanced users
* Remove outdated ipv6 section
* Fix broken links
* live usage docs
* review usage docs
* history usage
* explore usage
* add usage sidebar and move related text to usage sections
* update links
* update live
* move exports to usage
* fix anchors
* Make starts of usage pages consistent
* refactor network config
* Adjustments for review
* Add AI details to history page
* describe alerts vs detections in review usage
* simplify
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* republish MQTT switch states when a profile is activated or deactivated
* fix object mask default name when created from Explore tracking details
* tweak annotation offset max in UI
* optimize recordings/unavailable gap detection and drop empty motion activity buckets
* add tests
* add ptz presets and default role widgets
* language tweaks
* fix width in triggers view
* tweak iOS PWA message in notifications settings
* deprecate ui.date_style and ui.time_style
these have been unused since date/time formatting has been pushed to i18n
* add config migrator to remove date_style and time_style
* remove date_style and time_style from reference config
* fix camera list scrolling in state classification wizard on mobile
* remove redundant per-view toasters in settings
* add variants to standardize dialog footer button layouts
* remove text-md
this class name compiles to nothing in tailwind. we used to add it to prevent iOS from zooming when focusing on an input, but that is now solved via the viewport meta in index.html
* make wizard footers consistent with dialog footers
* consistent destructive button style
remove text-white from individual buttons and add it to the variant
* add clone dialog
* i18n
* tweaks
* add to camera management pane
* add e2e test
* optional disable portal prop
* radio and checkbox tweaks
* tweak i18n
* add select all/select none
* fixes
* reset form only on open transition
* unselect all targets for existing camera
* fix test
* reorder sections for save and collapse to single put for new camera
* change source and allow cloning to multiple cameras
* tweak language
* fix overflowing text in save all popover
* tweaks
* fix per label object masks
* use grid for source and target
* language tweak
* restructure camera enable/disable pane
* remove obsolete camera edit form
* change terminology to off/on instead of disabled/enabled
* docs
* move menu options and add current camera name badge
* docs
* tweaks
* use monotonic clock for detector inference duration to prevent negative values from wall clock steps
* add ability to set camera's webui_url from camera management pane
* Gemini send thought signature
* Update docs
* copy face and lpr configs from source camera to replay camera
* add guard
* improve dummy camera docs
* remove version number
* fix stale field message after reverting a conditional form field
Routes field-level conditional messages through a dedicated React Context instead of merging them into uiSchema. RJSF's Form keeps state.uiSchema sticky across renders during processPendingChange (formData is updated, uiSchema is not), so a previously injected ui:messages array stays attached to a field even after the triggering condition flips back to false. Context propagation re-runs FieldTemplate directly on every provider value change, sidestepping that staleness.
* add semantic search field message to note that model_size is irrelevant when embeddings provider is selected
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* filter replay camera from camera selectors
* add face rec and lpr to replay configuration sheet
* add missing config topic subscriptions in embeddings maintainer
* pop replay camera from config object when stopping
* preserve user-set min_score on attribute filters instead of bumping any 0.5 value
use model_fields_set to distinguish "user explicitly set min_score" from "Pydantic applied the generic FilterConfig default of 0.5"
* add config test for attributes
* fix attributes frontend type
* add expanded hidden field context
* extend schema modification
* special case for attributes
* i18n for attributes
* handle dedicated lpr mode
* strip unrendered FilterConfig fields from attribute filter form data to fix validation errors
* start audio transcription post processor when enabled on any camera
* Fetch embed key whenever an error occurs in case the llama server was restarted
* mypy
* add tooltips for colored dots in settings menu
* add ability to reorder cameras from management pane
* add ability to reorder birdseye
* add reordering save text to camera management view
* Include NPU in latency performance hint
* Implement turbo for NPU on object detection
* hide order fields
* drop auto-derived field paths from camera value when unset globally
* use correct field type for export hwaccel args
* add debug replay to detail actions menu
* clarify debug replay in docs
* guard get_current_frame_time against missing camera state
* Implement debug reply from export
* Refactor debug replay to use sources for dynamic playback
* Mypy
* fix debug export replay source timestamp handling
* skip replay cameras in stats immediately
* broadcast debug replay state over ws and buffer pre-OPEN sends
- push debug replay session state over the job_state ws topic so the status bar reacts instantly to start/stop without polling
- fix child-effect-before-parent-effect race in WsProvider that silently dropped initial snapshot requests on cold load
* fix debug replay test hang
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* detector UI fixes
- derive detector and model from memo rather than using two drain useeffects
- sanitize save payload through sanitizeSectionData to prevent yaml validation issues
* increase display duration for restart required toasts
* mimic logic in detector section for save all button
also, increase toast duration for restart required toasts
* fixes and tweaks
- use section hidden fields for sanitization instead of duplicating code
- use parent hooks so save all, pending data, and the status dots work correctly
* add embedded mode to BaseSection so parents can host the save action
* add optional action slot to current Frigate+ model summary
* add w-full to action slot flex wrapper for explicit width contract
* i18n
* merged detectors and model settings view
* fix document title
* Embed detector form in merged settings view
* add detection model card with tabs and custom model embed
* add Frigate+ model selector with filter popover to merged page
* Add mismatch banner and gate save on detector and model compatibility
* Wire atomic save, restart toast, and undo on detectors and model page
* Clear child pending data on undo
* route merged detectors and model view in settings
* trim Frigate+ page to account-only and remove old detection model view
* basic e2e
* Fix unsaved-changes guard, custom path leak, and post-failure cache resync
* Rename to Detectors and model, float Modified badge, use ConfigMessageBanner for mismatch
* Hide Plus/Custom tabs when Frigate+ is not enabled
* Detect active Plus model via model.plus.id instead of path prefix
* Sync state back to snapshot when child form un-modifies and remount on undo
* Always require restart on save since model changes also need one
* Wrap Frigate+ model selector in SplitCardRow with label and description
* rename tab
* update docs
* sync top-level model with default detector's resolved model
when the user doesn't define a top-level `model:` block, `FrigateConfig.model` stayed at pydantic field defaults (320×320, /labelmap.txt) while the per-detector model picked up `DEFAULT_MODEL` for openvino on cpu (300×300, coco_91cl_bkgr.txt introduced in #23127), causing `RemoteObjectDetector` to fail with "buffer is too small for requested array" because the SHM was sized from the per-detector model but mapped using the top-level one. After the detector loop, copy the first detector's resolved model up to `self.model` so both sides agree on dimensions and labelmap
* revert to cpu detector by default
use openvino cpu for new configs only
* add defaults
* improve scroll handling for non-modal DropdownMenu in classification and face selection dialogs
* clean up
* fix incorrect key capitalization
* fix profile array overrides not replacing base arrays
don't use lodash merge(), it does positional merging and an empty source array doesn't override the destination, and shorter arrays leak destination elements through.
backend is unaffected, so the saved config and actual backend functionality was right
* only show audio debug tab when audio is enabled in config
* move apple_compatibility out of advanced
* remove retry_interval from UI
99% of users should never be changing this
* hide switch in optionalfieldwidget if editing a profile
* add override badges for cameras and profiles
collect shared functions into the config util and separate hooks
* Use new models endpoint info to determine modalities
* clarify language
* fix linter
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* add optional onClick to EmptyCard
* show EmptyCard in face rec when face library is empty
* add loading indicator
* add description to camera management pane
* Cleanup when use snapshot but can't load snapshot
* Migrate files
* fix birdseye color distortion when configured aspect ratio is unsupported
* Skip processing end for object descriptions
* don't crash if stats is null
* fix genai roles in migration
* frigate+ pane updates
- allow users to select a plus model from the select even when one was not previously loaded
- always show model summary card
- add model filter popover
- add restart button totast
* fix frigate+ pane layout and buttons to match other settings panes
* match button layout in go2rtc settings view
* make audio maintainer respond to dynamic config updates
* check correct zone name in publish state
* fix nested translation extraction for Optional dict and list fields
* mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* hide camera overrides badge from system sections
* show empty card on camera metrics page when no cameras are defined
* fix enabled camera state switch after adding via wizard
Cameras added mid-session have no WS state until the dispatcher publishes camera_activity (which only happens on a fresh onConnect). Fall back to the config's enabled value so the switch reflects reality immediately after the wizard closes.
* guard camera enabled access
console would throw errors after adding via camera wizard
* fix useOptimisticState dropping debounced setState under StrictMode
* use openvino on cpu as default model
- faster than tflite on cpu
- add to default generated config
* use an enum for model_size
the frontend will then render this as a select dropdown because of the changes in the json schema
* i18n
* sync object filter entries with tracked labels in camera config form
Filter sub-collapsibles in the camera Objects section are driven by `filters` dict keys, but profile merges and live track-switch edits don't add matching entries, so newly tracked labels (like from a profile override) had no collapsible. Synthesize default filter entries from `track` in the form data so every tracked label renders a collapsible; baseline data also gets the synthesized entries, so save payloads are unchanged.
* revalidate raw paths cache after config save so CameraPathWidget shows fresh credentials
* fix test
* restore masked ffmpeg credentials when persisting camera config
* formatting
* rebuild ffmpeg commands when enabling recording for the first time
Toggling record.enabled from the config UI updated the in-memory config but left ffmpeg running with its original command, so the record output args were never wired in and nothing landed in the cache for the maintainer to move. The record config update now rebuilds ffmpeg_cmds when enabled_in_config transitions, and the camera watchdog restarts ffmpeg on a false to true transition so the record output gets wired in. MQTT toggles, which only flip record.enabled at runtime, are unaffected and continue to work via the maintainer's drop/keep gate.
* keep record toggle switch in single camera view disabled until enabled in config
* fix override detection for sections unset in the global config
Override badges and the blue dot now compare against schema defaults for sections like motion that the API serializes as null when omitted from the global YAML, instead of treating any populated camera config as an override
* add support for config-aware patterns in section hiddenFields
Section configs can now declare dynamic hidden-field entries as functions of the loaded config; objects.ts uses this to hide auto-populated attribute filters (DHL, face, license_plate, etc.) from the form, save flow, and override popover when those labels aren't user-settable
* siimplify object filters handling
live updating was getting very messy. users will just need to save once they enable a new object in order to see filters for that object
* tweaks
* update docs for new detector default
* make genai provider required and add special case for UI
prevent validation errors from appearing on initial creation of genai provider by setting the first option in the select dropdown as default
* use continuous expire date when loading reviews for recording cleanup
* reset heatmap filter when motion preview camera changes
* Add note about speed zones unit when enabled
* don't display fps warning for dedicated LPR cameras
* language tweaks
* allow changing camera type from management UI
* i18n
* fix ollama tool calling failure when conversation contains multimodal content from live frame tool results
* fix mypy
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* ensure embeddings process restarts after maintainer thread crash
* add docs link to media sync settings
* fix color
Co-authored-by: Copilot <copilot@github.com>
* match link color with other sections
* ensure recording staleness threshold scales with segment_time
* docs tweak
* Fix llama.cpp media marker
* Fix gemini tools call
---------
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Reduce max frames per second to 1
* Use pydantic but don't fail if some constraints are not met.
* Adjust limits
* Adjust limits
* Cleanup
* add unsaved changes icon/popover to individual settings section
* allow changing camera friendly_name from camera management pane
---------
Co-authored-by: Josh Hawkins <32435876+hawkeye217@users.noreply.github.com>
* use ffmpeg to probe rtsp urls instead of cv2
cv2 is faster (no subprocess launch) and will continue to be used for recording segments
* tweak faq
* change unsaved color to orange
avoids confusion with validation errors (red)
* don't use any variant of orange as a profile color
avoids confusion with unsaved changes
* more unsaved color tweaks
* apply annotation offset to frigate+ submission frame time
* fix broken docs links with hash fragments that resolve wrong on reload
* undo
* use recording snapshot for frigate+ frame submission from VideoControls
rather than a canvas grab/paint, which may not always align with an ffmpeg snapshot due to keyframes
* add more docs links
- display docs link for main sections on collapsible fields
* dialog button consistency
* display area as proper percentage in debug view
* match replay objects list with debug view
* motion search fixes
- tweak progress bar to exclude heatmap and inactive segments
- show metrics immediately on search start
- fix preview frame loading race
- fix polygon missing after dialog remount
- don't try to drag the image when dragging vertex of polygon
* add activity indicator to storage metrics
* make sub label query for events API endpoints case insensitive
* add guards to reject missing sub commands
* mask/zone bugfixes
- fix websocket crash when creating a new mask or zone before a name is assigned
- fix deleted masks and zones not disappearing from the list until navigating away
- fix deleting profile override not reverting to the base mask in the list
- fix inertia defaulting to nan
* disable save button on invalid form state
* fix validation for speed estimation
* ensure polygon is closed before allowing save
* require all masks and zones to be on the base config
* clarify dialog message and tooltip when removing an override
* clarify docs
* implement hook to return resolved "24hour" | "12hour" string
delegate to existing use24HourTime(), which correctly detects the browser's locale preference via Intl.DateTimeFormat
* update frontend to use use24HourTime(config) or useTimeFormat(config) instead of directly comparing config.ui.time_format
* tweak language
* show validation errors in json response
* fix export hwaccel args field in UI
* increase annotation offset consts
* fix save button race conditions, add reset spinner, and fix enrichments profile leak
- Disable both Save and SaveAll buttons while either operation is in progress so users cannot trigger concurrent saves
- Show activity indicator on Reset to Default/Global button during the API call
- Enrichments panes (semantic search, genai, face recognition) now always show base config fields regardless of profile selection in the header dropdown
* fix genai additional_concerns validation error with textarea array widget
The additional_concerns field is list[str] in the backend but was using the textarea widget which produces a string value, causing validation errors.
Created a TextareaArrayWidget that converts between array (one item per line) and textarea display, and switched additional_concerns to use it
* populate and sort global audio filters for all audio labels
* add column labels in profiles view
* enforce a minimum value of 2 for min_initialized
* reuse widget and refactor for multiline
* fix
* change record copy preset to transcode audio to aac
* mobile button spacing
* prevent console warning about div being descendant of p
* ensure consistent spacing
* add missing i18n keys
* i18n fixes
- add missing translations
- fix dot notation keys
* use plain string
* add missing key
* add i18next-cli commands for extraction and status
also add false positives removal for several keys
* add i18n key check step to PR workflow
* formatting
* fix genai settings ui
- add roles widget to select roles for genai providers
- add dropdown in semantic search to allow selection of embeddings genai provider
* tweak grouping to prioritize fieldOrder before groups
previously, groups were always rendered first. now fieldOrder is respected, and any fields in a group will cause the group and all the fields in that group to be rendered in order. this allows moving the enabled switches to the top of the section
* mobile tweaks
stack buttons, add more space on profiles pane, and move the overridden badge beneath the description
* language consistency
* prevent camera config sections from being regenerated for profiles
* conditionally import axengine module
to match other detectors
* i18n
* update vscode launch.json for new integrated browser
* formatting
* Add go2rtc settings section
- create separate settings section for all go2rtc streams
- extract credentials mask code into util
- create ffmpeg module utility
- i18n
* add camera config updater topic for live section
to support adding go2rtc streams after configuring a new one via the UI
* clean up
* tweak delete button color for consistency
* tweaks
