* fix auto quality recovery after a downswitch
The downswitch callback armed the upswitch probe, but `triggerDownswitch` reset the stall history right after the callback returned, which disarmed it again. Auto quality stayed on the sub stream until the next chunk boundary no matter how much the connection recovered. The governor now arms the probe itself after the reset.
The chunk boundary effect also ran on mount, so when coverage was already cached it immediately undid the low quality cold start the seed effect had just picked. It now only runs when the chunk actually changes.
* fix recording playback quality switches and silent codec failures
A quality switch changes `bufferLength` a commit before the new source arrives, and since it was a dependency of the hls.js setup effect, the player rebuilt once on the outgoing playlist (jumping back to its original `startPosition`) and again on the new one. The buffer length now updates the running instance's config instead.
A fatal codec error with no lower quality stream to fall back to did nothing at all, so playback just sat there with no message. It now shows the playback failure toast, which is also limited to once per source since hls.js and the video element can both report the same failure.
* retry failed WebRTC probes and skip offline streams
The connectivity probe only ever tried the first go2rtc stream and cached its result for the whole page session, so a single offline camera at the top of the go2rtc config marked WebRTC unreachable for every camera until a reload, as did any brief network hiccup. The probe now starts with the stream being viewed and moves on to the next one when go2rtc reports that it can't open the stream's source. A failed result is only reused for 30 seconds, and it's retried on the next mount or when the page becomes visible again.
* fix two-way talk on cameras with AAC audio
The mic button was enabled whenever WebRTC was globally available, but the live view only switched to the WebRTC player when the stream itself qualified for WebRTC, and AAC playback audio disqualifies it. On most cameras the mic showed as on while nothing was sent. Two-way talk only needs the stream's video to connect since the backchannel is sent, not received, so AAC playback audio no longer blocks it. The mic is also turned off when a stream switch makes talk unavailable.
* keep Frigate+ model references when saving the models section
`/api/config` served a Frigate+ model's path as the resolved `/config/model_cache/<id>` file, and since the models list is saved whole, editing any model in the settings UI wrote that cache path back to the config in place of `plus://<id>`. After a restart the model loaded as a custom model with the default labelmap. The config API now reports the `plus://<id>` reference the model was configured with, and the models section drops the fields the Frigate+ model info supplies (size, tensor, pixel format, dtype, and type) instead of pinning them in the config.
* allow models to share shareable detection hardware
The hardware picker treated every device another model listed as taken, so a second model couldn't pick an Intel GPU or the CPU that the first one already used. The backend only rejects reuse of devices that can't be shared (Coral, MemryX), so the picker now matches that and only marks exclusive units as claimed.
* fix model card state and camera counts in the models editor
Model cards were keyed by index, so deleting one handed its state (such as the selected model source tab) to the card after it. Cards are keyed by scene now, which is unique per model.
The camera count on each card also ignored the backend's fallback to the `all` model, so a camera whose detect scene had no model of its own wasn't counted anywhere. It's counted under `all` now, which also feeds the recommended detector count.
* share a unit's temperature across repeated detector devices
Detector temperatures were matched to units by counting detectors of each type, so a device listed twice to run a second inference process (`hailo:PCIe` and `hailo:PCIe#2`) showed the next unit's temperature, or none at all. Distinct devices are numbered now and repeats share their unit's reading.
* update monitored hardware after a runtime config swap
`swap_runtime_config` rebound the stats emitter to the new config but not its `HardwareStats`, which kept polling hardware for the old config and applied camera updates to the discarded object. It now follows the swap along with its camera update subscriber.
* time out model downloads that never respond
`download_from_url` had no timeout, so a proxy or server that accepted the connection and never answered hung the download forever, including runtime downloads during startup. Connect and read timeouts now fail it like any other download error. The read timeout applies per socket read, so large models still finish.
* resolve segment start times in segment order
A camera stream's cached segments are probed concurrently, and each one chained its start off `last_segment_end` as soon as its own probe finished. When segments backed up in the cache and a later probe finished first, it chained off the wrong segment and the earlier one then moved `last_segment_end` backwards, so rows lost their exact adjacency. Probes still run concurrently, but each segment now waits for the one before it to settle its start before resolving its own.
* plan exports from the same coverage the vod route serves
The vod manifest nulls video-only glitch rows on audio-bearing streams, but exports planned their stream runs from the raw coverage, so a glitch row could produce a mixed-stream file or a 404 that failed the export. `null_audio_glitches` now works out each stream's audio composition itself, and exports go through it like the manifest and its realized timelines do.
An unstaged auto export also paged its playlist and chapters over main whenever main had any rows in range, even when the manifest served the range from sub and main only contributed glitches or slivers at the edges. It now reads the rows of the stream its single run actually uses.
* keep staged export chapters aligned across stream hand-offs
Each staged run of a mixed-stream export is rendered from its own pinned vod playlist, and that playlist's first clip snaps back to the preceding keyframe, so every staged file runs up to a GOP longer than its slice of the merged timeline. Chapters were placed on the merged timeline, so they drifted further from the video at every hand-off. Chapter windows for staged exports are now planned the same way each run's playlist is, carrying that keyframe lead-in into the offsets.
* clarify which hardware units only one model can use
* add e2e tests for shareable hardware and Frigate+ model saves
* only show the path field for a Frigate+ model without an API key
Without `PLUS_API_KEY` the models editor has no Frigate+ tab, so a `plus://` model showed every custom model field. The size, format, type, and labelmap fields are all supplied by the Frigate+ model info and ignored for a Frigate+ model, so editing them did nothing. Only the path is shown now, which still lets the model be switched to a custom one.
* keep a configured input_dtype when saving a Frigate+ model
The backend only overwrites `input_dtype` when the Frigate+ model info supplies `inputDataType`, which older models don't, so a configured dtype still matters for them. Saving the models section was dropping it along with the fields the backend always overwrites.
* probe every go2rtc stream until one isn't refused
The probe stopped after three streams, so with three offline cameras ahead of a working one, WebRTC was marked unreachable everywhere. It only moves past a stream when go2rtc refuses it, which is quick, and a stream that hangs still ends the probe at its timeout, so the cap bought nothing.
* only reuse a failed WebRTC probe for the stream it started from
A failed probe was reused for 30 seconds by every caller, so a camera whose stream timed out kept WebRTC unavailable for the next camera viewed, including one opened while that probe was still running. A pass still counts for every stream since it proves the connection, but a failure is only reused by probes that start from the same stream.
* strip input_dtype from Frigate+ models again
A Frigate+ model's config comes entirely from its model info, and a missing `inputDataType` means the `int` default. Keeping `input_dtype` meant switching from a custom model with `input_dtype: float` to a Frigate+ model carried the stale dtype over, with the field hidden so it couldn't be corrected.
* Notice and status bar improvements
Status bar problems added in the same pass got the same `Date.now()` id and overwrote each other, so usually only one showed. Messages now fall back to their text as the id. The desktop status bar shows the most severe message with a count of the rest that opens a popover listing all of them, and the mobile drawer stacks them vertically instead of placing them side by side.
Dismissing a notice hid it for good, so a detector that restarted again after a dismissal was never shown. Dismiss is replaced by acknowledge, which hides a notice until it happens again, and mute, which hides it permanently. Kinds that never repeat (config and stream checks, the update notice) can only be muted. `reopen_at_count` is removed since acknowledge covers the failed login case.
* move camera CPU warnings to notices
High ffmpeg and detect CPU warnings sat in the status bar with no way to dismiss them. They're now `ffmpeg_high_cpu` and `detect_high_cpu` notices, raised per episode by the same tracker as skipped detections. Also stop failed login attempts held from before an acknowledgement from reopening the notice.
* fix mypy and handle missing cpu stats in notices
* Run ONNX models on a Mac's Neural Engine through lighter's plugin provider
lighter's lighter.sh/ane device places an ONNX Runtime plugin execution
provider in the container. When it is present, the ONNX session setup
registers it once and opens sessions on its Neural Engine device, the same
place CUDA, ROCm and OpenVINO are chosen, so the onnx detector (and any
model that is not pinned to the CPU) runs there with no configuration. The
hardware probe reports it as an onnx unit.
* docs: hardware decode on an Apple Silicon Mac under lighter
A community section on the video decoding page: lighter's lighter.sh/video
device, hwaccel_args -c:v h264_v4l2m2m, and why the Raspberry Pi presets
decode a single-stream camera in software. The detector docs link to it.
* docs: set the lighter decoder per camera when codecs are mixed
* docs: the ONNX detector on a Mac's Neural Engine under lighter
* Format the Neural Engine provider setup
* Fall back to the default providers when the Neural Engine cannot load a model
* Apple Silicon ffmpeg presets for lighter's media engine, recommended when it is present
* don't display audio transcription provider message as health notice
* show remote provider for audio transcription in health pane
* adjust trigger and notifications messages to be consistent with the rest of the settings UI
* disable save buttons when there are no changes in config editor
* fix audio manager crash when a camera is added at runtime
The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update.
`AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors.
* fix stationary max_frames dropping other tracked objects
When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update.
* fix test
* fix skip_motion_threshold permanently disabling motion detection
The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating.
Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back.
* dump ffmpeg logs on every restart
The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`.
* dump ffmpeg logs once per restart
The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section.
* keep all logpipe dumps consistent
* check for a valid frame before using its shape
With the camera offline, no preview frame, and `camera-error.jpg` missing, `latest_frame` read `frame.shape` before its `frame is None` check, so it raised `AttributeError` and answered 500 with a traceback instead of the intended "Unable to get valid frame". The check now runs first.
* fix the has_clip self-heal for events with no recordings
`vod_event` looked for a `(body, 404)` tuple, but `vod_ts` returns a `JSONResponse`, so the check never matched and an old event whose recordings are gone kept offering a clip that can't play. It now checks the response status code.
* return 403 for a snapshot or thumbnail on another camera
The broad `except Exception` handlers in `event_snapshot` and `event_thumbnail` caught the `HTTPException` from `require_camera_access`, so a restricted user asking for another camera's snapshot got a 404 instead of a 403, and for an object still being tracked the snapshot was rendered before the check ran. Both endpoints now look up the event and check access in their own block, the way the other endpoints do, so a denial propagates.
* find DST transitions to the second
`get_dst_transitions` probed the offset once every 24 hours from the start time and reported a change at the first probe after it, up to a day late, so events, review items and recordings near a transition were grouped into days with the old offset. A transition after the last daily probe wasn't found at all. The end of the range is probed too now, and a probe that sees the offset change bisects the interval to the second of the transition.
* don't run page shortcuts for keys a dialog already handled
Radix dismisses a dialog on Escape from a capture-phase keydown listener and calls `preventDefault()` without stopping propagation, so `useKeyboardListener` still ran the page's Escape shortcut: cancelling the delete dialog in the face library or a classification model also cleared the whole selection. Keys another shortcut hook handled still get through, since their listener order changes with every render.
* fix train image filtering for a class with a dash
The backend writes a class with a `-` as `_` in train file names, since it splits those names on `-`, while a dataset folder keeps the dash. Filtering the Train grid by `half-open` compared it with `half_open` and hid every attempt. Both sides are normalized the same way now.
* don't edit a chat message while a reply streams
The edit button stayed active while a reply streamed. `submitConversation` returns early while loading, but the message bubble still closed its editor, so the edit was silently lost. The edit button is hidden while a reply streams, and an editor that's already open keeps its draft with send disabled until the reply ends.
* fix restart failing under non-root
restart_frigate() called psutil.Process(1).terminate() to signal s6-svscan, but s6-svscan runs as root while frigate runs as uid 1000, so the call raised AccessDenied. That exception escaped every caller: the UI restart button dropped its websocket client, MQTT restart and Save & Restart just logged and did nothing, and the watchdog crashed its own monitoring thread on a dead detector. This catches AccessDenied and falls through to the existing SIGINT branch, which exits the process for s6 to restart it.
* show runtime overrides in the settings form
The settings form read a camera section's saved config value, but its dependent warnings (audio transcription requiring audio detection, snapshots requiring detect, etc.) read the live config instead. A runtime toggle from the live view, MQTT, or an active profile can turn a section off without touching yaml, and that override persists across restarts, so the Enable switch showed on while the warning said the feature wasn't enabled. This adds an "Overridden (Live)" badge to any field whose live value differs from what's saved, and swaps the affected warnings to runtime-specific wording when a runtime override is the actual cause instead of the config.
* fix mobile overflowing icons in system due to new health pane
* fix genai settings keeping a stale model and dropping roles after save
Switching a GenAI entry's provider left the previous provider's model selected, so saving wrote a model the new provider doesn't serve. llama.cpp can't find that model in `/v1/models`, so the backend reported every capability as false for the entry, and once the save refetched `genai/models` the roles widget stripped `transcribe` from the form on its own. The section showed unsaved changes right after saving, and saving again would have dropped the role. Switching provider now clears the model, and the roles widget only strips a role for a model or provider picked in the form, since the entry-level capability flags only describe the saved model. A selected role stays visible when the provider can't confirm it, so it can still be switched off. The llama.cpp model list also no longer repeats a model whose alias matches its id, which is what `--alias` produces.
* close onvif sessions on shutdown
`OnvifController.close()` only stopped its event loop, so the aiohttp sessions each `ONVIFCamera` holds and the `_poll_config_updates` task were left to be garbage collected during interpreter shutdown, when their warnings can no longer be logged. Every restart ended with a run of `Unclosed client session` and `Task was destroyed but it is pending!` logging errors, which only became visible once restart started exiting the process itself under non-root. `close()` now closes each camera's client and cancels the tasks on the loop before stopping it.
* fixes
* fixes
* Add support for running transcription with GenAI
* Improve audio joining
* Fix GenAI model capability reporting
* Support language correctly
* Migrate existing users to keep english selected
* Fix models
* Fix tests
* Fix accepted null model
* Handle slwo providers
* Implement annotated frames mode for GenAI reviews to improve models with lacking temporal understanding
* Updates
* Improve debug sharing
* Do not number objects
* Fix assumptions
* Remove unhelpful content
* Improve object data sent as part of prompt
* Cleanup ollama dumbness
* Bind db
* Fixes
* Cleanup
* allow users to select live streaming technology
* fix webrtc being downgraded to mse on load
`useUserPersistence` seeds state with the default and loads asynchronously, so the first render always used `mse` instead of the saved choice, and `useWebRTCGloballyAvailable` reports `checking` until the probe settles and re-enters that state on every consumer mount, so a saved `webrtc` was rewritten to `mse` even after the probe had already passed. On Safari the MSE player then timed out and latched the jsmpeg fallback. A pending probe now counts as available, the player waits on `autoLive` until the stored preferences load, and `handleError` gates on the mode in use since the fallback flag no longer implies webrtc is untried. A rejected IndexedDB read also resolves `loaded` now, so a blocked store can't leave the player waiting forever.
* add support for configurable ICE servers in WebRTC player
* add mic error state, fix dialog overwriting saved choice and dashboard ignoring stream
* tweaks
* add error boundary
on frontend errors, show a page-level recovery panel and a separate compact strip for the sidebar/status/bottombar so failures there don't take down the rest of the page
* tweaks
* fix test
* Support multi resolution exports
* Fix decoder text
* Add dropdown and ability to select export stream selection
* Fix for review comments
* Fix mypy
* Cleanup wording
* add a notice registry and System Health tab
Problems Frigate detects on its own (ffmpeg crash loops, stuck detectors, failed model downloads, recordings deleted before their retention period) only ever existed as log lines. This adds a `NoticeRegistry` in the main process backed by two tables, an `update_notice` IPC topic so producers in other processes can reach it through the dispatcher, an admin-only API and websocket topic, and a Health tab that lists them. Kinds declare their own mode, severity, and category in one place: state notices are resolved by their producer, event notices are dismissed by the user.
* treat a prerelease as behind its final release
* fix notices clearing early
* rename menu items and update docs
* don't resolve the update notice on a failed version lookup
* add onboarding wizard for new users
* resolve hwaccel per camera and clarify recording retention
The hwaccel step listed every preset Frigate ships, so an Intel box was offered Raspberry Pi and Rockchip decoding, and the codec specific presets (`preset-intel-qsv-h264` vs `-h265`) were offered as global values that break as soon as two cameras use different codecs. `/hardware/hwaccel` now returns the decoding families the probed hardware can actually use, each carrying a preset per codec, and the wizard resolves the family against the detect stream codec the camera wizard already probed: one global `ffmpeg.hwaccel_args` when every camera agrees, per-camera `cameras.<name>.ffmpeg.hwaccel_args` when they don't. The global stays on `auto` in that case so cameras added later still resolve at startup. A gen13+ Intel machine keeps its QuickSync recommendation with mixed h264 and h265 cameras instead of dropping to vaapi.
The recording step's "Days to retain recordings" only wrote alert and detection retention, and the storage estimate under it assumed continuous recording. It now asks what to record in plain language, writes `record.continuous.days` to match, shows the estimate only for continuous, and drops the spinner arrows on the number input.
* clean up
* add light/dark mode icon switcher
* use yml as default config file extension when not found
* i18n tweaks
* gate the setup wizard on cameras instead of a config key
* render setup wizard steps by key
* share the setup wizard e2e helpers and mock users
* add an account step to the setup wizard
* add setup wizard account step e2e coverage
* cover the account step's restart behavior
* button consistency
* fix test
* docs
* fixes
* improve keyframes messages
* don't pad the labelmap with unknown
`load_labels()` prefilled 91 `unknown` entries before reading the label file, so any model with fewer than 91 classes kept that padding in `merged_labelmap` and `unknown` showed up as a selectable object type in the objects settings UI. The padding only existed so `RemoteObjectDetector.detect` could index the labelmap without a KeyError, and it didn't even cover the empty-file case or Frigate+, which never had a prefill. Both lookups now skip class ids the labelmap doesn't name and warn once per id.
* add import/export for camera group layouts and streaming settings
Camera group layouts and per-camera streaming settings are stored in the browser's IndexedDB, so they are tied to a single browser on a single device. Users with more than one device have to rebuild every group layout and re-pick every camera's stream settings by hand, and clearing browser data loses the work.
Add a Backup & Restore card to Settings > UI Settings that exports these settings to a JSON file and imports that file on another device. Import shows a confirmation dialog with per-section counts, switches for layouts, streaming settings, and UI preferences, and warnings about camera groups or cameras in the file that are not on this server.
Server-side storage is deliberately avoided. These are per-device presentation settings: a layout arranged for a desktop is wrong on a tablet, and continuous full-resolution streams that are free on a wired LAN are not on a phone. An explicit file moves settings only when the user chooses to move them.
Implementation notes:
- web/src/utils/uiSettingsTransfer.ts owns a registry of transferable IndexedDB keys. Each entry records whether the key is user-namespaced, matching which persistence hook wrote it, plus a zod schema for its value.
- Only registry-known keys are ever written, and only when their value passes that schema. The file format deliberately lets unknown keys survive parsing, so this filter is what prevents a hand-edited file from writing arbitrary storage keys or out-of-range values.
- Export falls back to the legacy un-namespaced key, because the username migration runs lazily on first mount of each owning hook.
- Streaming settings merge per group rather than replacing the whole map, so groups configured only on the receiving device survive.
- Import writes storage and then reloads, because useUserPersistence reads a key only on mount and StreamingSettingsProvider would otherwise write its stale in-memory state back over the import.
- playbackBandwidthEstimate, frigate-search-history, and live-layout are excluded: the first two are measurements and user data rather than preferences, and live-layout's default is derived from the device.
* merge imported streaming settings per camera instead of per group
Allow audio classes to be grouped under a shared configured label.
Keep audio overrides separate from object labels and retain only the highest-scoring grouped detection.
Refs #23967
* add ptz controls to camera via wizard when onvif has already been probed
* i18n
* add e2e test
* backend add and remove subscriber
* tweaks
* turn on switch by default if pan and/or tilt capability is available
* fix test
* add sub stream recording with adaptive quality playback
Optionally record a second, lower bitrate stream alongside the main
recording stream via a `record_sub` input role and `record.sub` config block, with its own retention windows.
Recordings rows now carry the stream type plus the media details needed to serve both streams from one manifest: video codec, audio presence, audio codec and rate, and a record-time keyframe index.
Playback resolves coverage across both streams and merges them into a single VOD sequence, falling back to a discontinuity manifest with per-clip init segments when the media signatures differ. The player exposes a quality selector, and an auto governor picks the stream from stall time, bandwidth, codec support, and the save-data hint.
* fix tests and i18n
* Add combined motion and object Birdseye mode
Add a motion_objects mode that keeps Birdseye active when motion is detected or a confirmed tracked object is present, including stationary objects.
Wire the mode through configuration, runtime commands, API schemas, documentation, and UI labels. Exclude false-positive trackers and add regression coverage for Birdseye activation and MQTT validation.
* Refactor Birdseye activity types as booleans
Replace combination-specific Birdseye modes with composable boolean activity types for motion, active objects, stationary objects, and continuous display.
Preserve legacy single-mode configuration and MQTT inputs, support canonical comma-separated MQTT combinations, and allow scalar YAML values to be replaced by nested settings through the config API.
* Preserve OpenVINO config translations
Regenerate the configuration translations with the OpenVINO detector schema available so the unrelated production detector labels remain intact.
* Preserve partial Birdseye mode overrides
Allow an empty activity selection with a canonical NONE MQTT state so partial camera and profile overrides can disable inherited flags without failing validation.
Add regression coverage for camera and profile inheritance, document the NONE contract, and keep the generated schema fixture scoped to Birdseye.
* Address Birdseye activity review feedback
Move scalar mode compatibility into the 0.18-1 config migration and reject empty activity selections instead of publishing a NONE state.
Pass activity signals through a frozen dataclass, preserve existing active-object tracker behavior, and require confirmed stationary objects. Revert the generic YAML mutation and cover migration, inheritance, MQTT, and activation regressions.
* Move Birdseye migration to 0.19
Use the 0.19-0 configuration revision for converting scalar Birdseye modes to composable activity flags, and update the migration regression coverage accordingly.
* Remove Birdseye migration test
Drop the dedicated config migration test as requested during review while retaining the 0.19-0 migration implementation.
* run lpr on more vehicle types by default
before, a config change to attribute_map was required
* logging tweaks
* remove arg
* use attributes for frontend check
* docs
* only check thumbnail attributes the object can have
* fix(audio): correct sodeling typo to yodeling
Fixes a typo in audio-labelmap.txt where the yodeling class was
misspelled as "sodeling".
* fix(i18n): remove duplicate sodeling key in en audio.json
The en audio.json already contains a correct "yodeling" key. Remove
the duplicate/misspelled "sodeling" entry to avoid ambiguity.
When a motion region filter is active, zoom each preview clip into the outer bounds of the selected cells instead of showing the full frame. Tiles take on the aspect ratio of the cropped region, clamped to avoid slivers when the selection is a single row or column, so the grid stays uniform. A "Crop to filter" switch in the preview settings turns this off and restores the previous 16:9 tiles. The transform is applied to a wrapper holding both the media and the dim overlay canvas so the motion heatmap stays registered to the pixels.
Fix the region filter grid, which mapped cells onto a hardcoded 16:9 box while the snapshot was letterboxed inside it with object-contain. Heatmap cells are indexed against the detect frame, so on a 4:3 camera every painted cell was off by up to 12.5% of the frame width, and the true left and right edges of the image could only be reached by painting the black bars. The grid box now takes the camera's detect aspect ratio, capped at 65dvh tall so 4:3 and portrait cameras do not overflow the dialog.
* improve display of gpu graphs in system metrics
* docs tweaks
* Only hide cameras with ui.dashboard disabled from the All Cameras dashboard
The settings camera selector and zone editor also filtered on ui.dashboard, so hiding a camera from the dashboard made its zones and masks uneditable in the UI (GH 23870). Drop those filters and correct the field title, help text, and reference docs to describe what the option actually does
* hide cameras with ui.review disabled from the Motion tab and the review summaries
The Motion tab built its own camera list that never checked ui.review, so a hidden camera still got a preview tile, and its motion and overlap queries fell back to every allowed camera. The review and recordings summaries had the same gap: they are aggregate day counts that can't be filtered client side, so a hidden camera kept contributing to the severity tab counts and calendar indicators while its items were absent from the list. Filter the motion camera list on ui.review and query all four endpoints with the visible camera list instead of letting the backend default to all, and skip the summary queries until the config resolves so the counts don't briefly render as zero.
* Scope every review page query to the cameras visible in review
The segments and the summary counts were derived from different camera sets: the list was fetched for all cameras and filtered client side, while the summaries were fetched for the visible cameras only when no explicit camera filter was set. A ?cameras= link can name a camera hidden from review, which left the count above zero with an empty list, pinning the new items to review popover open and making the auto refresh effect loop. Intersect an explicit camera selection with the visible list rather than trusting it, pass that to the segment and summary queries alike, and drop the now redundant client side filter, which the raw segments handed to the history view were bypassing anyway.
* add ability to edit enabled and save_attempts for classification models in the UI
* add state motion and interval configs to edit dialog
* fix preview playback rate for motion previews
* add docs note about environment vars and go2rtc
* update live view faq
