* Notice and status bar improvements
Status bar problems added in the same pass got the same `Date.now()` id and overwrote each other, so usually only one showed. Messages now fall back to their text as the id. The desktop status bar shows the most severe message with a count of the rest that opens a popover listing all of them, and the mobile drawer stacks them vertically instead of placing them side by side.
Dismissing a notice hid it for good, so a detector that restarted again after a dismissal was never shown. Dismiss is replaced by acknowledge, which hides a notice until it happens again, and mute, which hides it permanently. Kinds that never repeat (config and stream checks, the update notice) can only be muted. `reopen_at_count` is removed since acknowledge covers the failed login case.
* move camera CPU warnings to notices
High ffmpeg and detect CPU warnings sat in the status bar with no way to dismiss them. They're now `ffmpeg_high_cpu` and `detect_high_cpu` notices, raised per episode by the same tracker as skipped detections. Also stop failed login attempts held from before an acknowledgement from reopening the notice.
* fix mypy and handle missing cpu stats in notices
* don't display audio transcription provider message as health notice
* show remote provider for audio transcription in health pane
* adjust trigger and notifications messages to be consistent with the rest of the settings UI
* disable save buttons when there are no changes in config editor
* fix audio manager crash when a camera is added at runtime
The audio processor and the camera maintainer both poll the same `add` config update on their own one second timers, and the maintainer is what creates `camera_metrics[name]`. When the audio processor got there first it looked the new camera up before that entry existed, and the `KeyError` took down the whole `frigate.audio_manager` process. Whether it happens depends purely on which poll fires first, so cloning a camera from the UI fails or succeeds at random. `spawn_if_needed` now skips a camera whose metrics aren't there yet and picks it up on the next poll, the same way it already waits on a late ffmpeg update.
`AudioEventMaintainer` holds the `CameraMetrics` object now instead of indexing the manager dict on every audio chunk, which drops the IPC round trips and means a removed camera can't `KeyError` out of `detect_audio` after the maintainer pops the entry. The audio process is also registered with the watchdog, since a crash there previously left audio detection dead for every camera until a full restart, and it now receives the shared `DataProcessorMetrics` so `AudioTranscriptionRealTimeProcessor` gets the same type as the other real time processors.
* fix stationary max_frames dropping other tracked objects
When `max_frames` was set for a label, deregistering one object rebuilt norfair's list with a filter that kept an object only if it was both not the target and already on its way out, so every other healthy object of that label was dropped along with it. Any car leaving the frame took the rest of the cars with it and they came back as new tracked objects a few frames later. The filter now removes only the target, and objects that are expiring are still reaped by norfair on the next update.
* fix test
* fix skip_motion_threshold permanently disabling motion detection
The skip check returned before the two `accumulateWeighted` calls at the end of `detect`, so a skipped frame never made it into the background and setting `calibrating` there only picked a faster alpha for calls that never ran. `avg_frame` starts as an all zero image and a normally lit scene differs from black across nearly the whole frame, so the cameras I tested measure 0.84 to 0.98 against it. Any `skip_motion_threshold` below that number skips the first frame, leaves the background black, and skips every frame after it. Motion detection is dead for that camera until the setting is removed or Frigate restarts, with no motion boxes, no motion recordings, and no regions for the tracker since the detector stays calibrating.
Startup isn't the only way in. `update_mask` zeroes the background on any motion config change, and once a camera has calibrated the first IR switch or PTZ move freezes the background on the old scene, so it can't transition to the new one, which is the case the option exists for. The frame is now blended in before the early return at the same 0.2 alpha the calibrating path uses elsewhere, so a large scene change is still suppressed while the background catches up, about a second on a 5 fps camera, and then motion comes back.
* dump ffmpeg logs on every restart
The record watchdog restarted ffmpeg without flushing its `LogPipe`, so a camera whose recording segments went stale never showed a single line of ffmpeg output. The dump now happens in `start_or_restart_ffmpeg` right after the stop, which covers the stale record path, the record crash path, and the audio restart. `reset_capture_thread` and the audio `log_and_restart` fallback keep their own dumps since both pass `ffmpeg_process=None`.
* dump ffmpeg logs once per restart
The audio restart path dumped the log pipe itself before calling the helper, so the restart dump printed a second "last 100 lines" heading over an already drained deque and split the tail that `stop_ffmpeg` flushed into its own section. The heading is now only printed when there's something under it, and the audio path leaves the dump to the restart so each failure produces one section.
* keep all logpipe dumps consistent
* add a notice registry and System Health tab
Problems Frigate detects on its own (ffmpeg crash loops, stuck detectors, failed model downloads, recordings deleted before their retention period) only ever existed as log lines. This adds a `NoticeRegistry` in the main process backed by two tables, an `update_notice` IPC topic so producers in other processes can reach it through the dispatcher, an admin-only API and websocket topic, and a Health tab that lists them. Kinds declare their own mode, severity, and category in one place: state notices are resolved by their producer, event notices are dismissed by the user.
* treat a prerelease as behind its final release
* fix notices clearing early
* rename menu items and update docs
* don't resolve the update notice on a failed version lookup
* add onboarding wizard for new users
* resolve hwaccel per camera and clarify recording retention
The hwaccel step listed every preset Frigate ships, so an Intel box was offered Raspberry Pi and Rockchip decoding, and the codec specific presets (`preset-intel-qsv-h264` vs `-h265`) were offered as global values that break as soon as two cameras use different codecs. `/hardware/hwaccel` now returns the decoding families the probed hardware can actually use, each carrying a preset per codec, and the wizard resolves the family against the detect stream codec the camera wizard already probed: one global `ffmpeg.hwaccel_args` when every camera agrees, per-camera `cameras.<name>.ffmpeg.hwaccel_args` when they don't. The global stays on `auto` in that case so cameras added later still resolve at startup. A gen13+ Intel machine keeps its QuickSync recommendation with mixed h264 and h265 cameras instead of dropping to vaapi.
The recording step's "Days to retain recordings" only wrote alert and detection retention, and the storage estimate under it assumed continuous recording. It now asks what to record in plain language, writes `record.continuous.days` to match, shows the estimate only for continuous, and drops the spinner arrows on the number input.
* clean up
* add light/dark mode icon switcher
* use yml as default config file extension when not found
* i18n tweaks
* gate the setup wizard on cameras instead of a config key
* render setup wizard steps by key
* share the setup wizard e2e helpers and mock users
* add an account step to the setup wizard
* add setup wizard account step e2e coverage
* cover the account step's restart behavior
* button consistency
* fix test
* docs
* fixes
* Bump radix-ui packages to align react-dismissable-layer version and fix nested overlay pointer-events bug
* remove workarounds for radix pointer events issues on dropdown and context menus
* remove disablePortal from popover
* remove modal on popovers
* remove workarounds in restart dialog
* keep onCloseAutoFocus for face, classification, and ptz
these are necessary to prevent tooltips from re-showing and from the arrow keys from reopening the ptz presets menu
* add tests
* backend
* frontend + i18n
* tests + api spec
* tweak backend to use Job infrastructure for exports
* frontend tweaks and Job infrastructure
* tests
* tweaks
- add ability to remove from case
- change location of counts in case card
* add stale export reaper on startup
* fix toaster close button color
* improve add dialog
* formatting
* hide max_concurrent from camera config export settings
* remove border
* refactor batch endpoint for multiple review items
* frontend
* tests and fastapi spec
* fix deletion of in-progress exports in a case
* tweaks
- hide cases when filtering cameras that have no exports from those cameras
- remove description from case card
- use textarea instead of input for case description in add new case dialog
* add auth exceptions for exports
* add e2e test for deleting cases with exports
* refactor delete and case endpoints
allow bulk deleting and reassigning
* frontend
- bulk selection like Review
- gate admin-only actions
- consolidate dialogs
- spacing/padding tweaks
* i18n and tests
* update openapi spec
* tweaks
- add None to case selection list
- allow new case creation from single cam export dialog
* fix codeql
* fix i18n
* remove unused
* fix frontend tests
* basic e2e frontend test framework
* improve mock data generation and add test cases
* more cases
* add e2e tests to PR template
* don't generate mock data in PR CI
* satisfy codeql check
* fix flaky system page tab tests by guarding against crashes from incomplete mock stats
* reduce local test runs to 4 workers to match CI
