* Verify s6-overlay downloads against pinned checksums
* Verify go2rtc download against pinned checksums
The v1.9.14 release publishes no checksums file, just the bare per-platform binaries, so these digests come from a one-time fetch rather than upstream. That pins the artifact against later substitution, which is the realistic threat for a version we stay on for months, but it does not verify the original download. The stage moves from `ADD --link` to a script because `ADD --checksum` can't express an architecture-dependent URL.
* Verify main image downloads against pinned checksums
Covers everything the main image downloads on the default path: tempio, the hailort runtime tarball and wheel, the six ffmpeg builds, the libedgetpu deb, and the thirteen Intel driver debs. The hailort tarball was streamed straight into `tar`, which can't be verified before extraction, so it downloads to `/tmp` first. The three ffmpeg blocks per arch collapse into one `install_ffmpeg` helper since they only differed by URL and install dir, and the Intel debs go through a `fetch_intel_deb` helper for the same reason.
The Intel debs are the ones that mattered most here. They're installed as root with `dpkg` on the default amd64 path and had no verification at all. compute-runtime publishes a `ww<week>.sum` asset with every release and npu-driver published `checksum.sha256` on v1.19.0, so those eight digests came from upstream rather than from us. intel-graphics-compiler and level-zero publish none, so those five and everything else here come from a one-time fetch, which pins the artifact against later substitution but doesn't verify the original download. The comment above the map says which is which and how to refresh them, since npu-driver has stopped publishing sums since v1.19.0 and that provenance won't survive the next bump.
Still unpinned: `get-pip.py`, which is a rolling URL where a digest would just break the build on pypa's next edit, and the per-variant artifacts for Axera, Synaptics, and Jetson. apt repositories are out of scope since apt already verifies signatures.
* Restrict generated TLS key permissions
OpenSSL 3.x already writes the key at 600 on its own, so this pins the guarantee rather than fixing an observed leak: the mode no longer depends on the openssl version or the umask the service happens to start with. Only the generated pair is touched. User-mounted certs take the other branch and are never chmod'd, which matters when they're mounted read-only.
* Add security headers and server_tokens off
Adds `X-Content-Type-Options: nosniff` and `Referrer-Policy: strict-origin-when-cross-origin`, and turns off nginx version disclosure.
No `X-Frame-Options` and no CSP `frame-ancestors`. HA's Webpage card and iframe panels frame Frigate's own address cross-origin, and either header would break them silently with nothing in Frigate's logs to explain it. Ingress is same-origin and would survive `SAMEORIGIN`, but Frigate can't tell the two apart from inside the container. `security_headers.conf` is a plain file in the image rather than a generated one, so anyone who does want framing restrictions can bind-mount it.
`add_header` doesn't inherit into a block that declares its own, so the include goes in per block, all nine of them, including the four nested static-asset locations that serve the JS bundles. Those are the ones nosniff actually matters for.
The run script now reads `get_nginx_settings.py` once into a variable instead of shelling out per template. That script imports the frigate config machinery, which is noticeable on an SBC.
Not fixed here: `listen.conf` is included at server level and carries `Strict-Transport-Security`, so those same nine blocks already drop HSTS under TLS today. Folding it into this file would change existing TLS behavior on nine paths, so it needs its own PR.
* Restrict go2rtc config file permissions
* Log failed login attempts with source address
Failed logins returned a bare 401 and left nothing behind, so credential stuffing was invisible unless you were already watching nginx access logs. Both failure branches now log a warning with the attempted username and the client address.
The address comes from `get_remote_addr()`, the same helper the login rate limiter keys on, so the two agree on who the client is and the trusted-proxy handling is consistent. Logging a raw `x-forwarded-for` instead would let an attacker forge the source address in the very log line meant to catch them.
The response is unchanged and identical either way. Which factor failed is only visible in the log, never to the client, and the password is never logged.
* Recommend least-privilege container options in install docs
The compose generator pushed `privileged: true` into every file it produced, no matter what hardware you picked, and it's the default tab on the install page so it's what most people copy. It now emits `security_opt: no-new-privileges:true` instead, and only adds `privileged: true` for hardware that actually needs it, with the reason inline. MemryX is the only one today, since it needs to reach the max-manager. Rockchip and Synaptics only want privileged during initial setup and their documented end state is device mappings, so neither gets it.
`no-new-privileges` merges into the same `security_opt` block as any device-specific entries, so Rockchip still gets its `apparmor=unconfined` and `systempaths=unconfined` without a duplicate key.
The static example now has `privileged` commented out, and there's a short section on the options worth adding, with a note that `cap_drop: ALL` breaks `telemetry.stats.network_bandwidth` since nethogs needs NET_ADMIN/NET_RAW.
* Add amd64 container smoke test to CI
Boots the built amd64 image against a minimal config and asserts the two security headers, that the Server header no longer carries a version, that no frame-ancestors is present, that nginx accepts its own config, and the two file modes. This is also the harness the rest of the hardening work extends.
The two negative assertions are written as `if grep; then exit 1; fi` rather than `! grep`. Bash exempts a negated command from `set -e`, so the `!` form would have passed even with the version and frame-ancestors both present, which is the opposite of what a regression net is for.
* Refactor common functions for tflite detector implementations
* Add detector using mesa teflon delegate
Non-EdgeTPU TFLite can use the standard .tflite format
* Add mesa-teflon-delegate from bookworm-backports to arm64 images
* Improve ffmpeg versions handling
* Remove fallback from LIBAVFORMAT_VERSION_MAJOR, it should always be set
* Mention ffprobe in custom ffmpeg docs
* Fix ffmpeg extraction
* Fix go2rtc example formatting
* Add fallback back to LIBAVFORMAT_VERSION_MAJOR
* Fix linter
* Validate faces using cosine distance and SVC
* Formatting
* Use opencv instead of face embedding
* Update docs for training data
* Adjust to score system
* Set bounds
* remove face embeddings
* Update writing images
* Add face library page
* Add ability to select file
* Install opencv deps
* Cleanup
* Use different deps
* Move deps
* Cleanup
* Only show face library for desktop
* Implement deleting
* Add ability to upload image
* Add support for uploading images
* Fix access
* Reorganize tracked object for imports
* Separate out rockchip build
* Formatting
* Use original ffmpeg build
* Fix build
* Update default search type value
* Install multiple ffmpeg versions and add config to make it configurable
* Update docs
* Run ffprobe too
* Cleanup
* Apply config to go2rtc as well
* Fix ffmpeg bin
* Docs
* Restore path
* Cleanup env var
* Fix ffmpeg path for encoding
* Fix export
* Formatting
* Revert "Use latest 5.1 ffmpeg update (#12243)"
This reverts commit 93e08688be.
* Revert "Change qsv device arg to standard hwaccel arg (#12249)"
This reverts commit 56b4a551dc.
* Use different repo for build
* Non-Jetson changes
Required for later commits:
- Allow base image to be overridden (and don't assume its WORKDIR)
- Ensure python3.9
- Map hwaccel decode presets as strings instead of lists
Not required:
- Fix existing documentation
- Simplify hwaccel scale logic
* Prepare for multi-arch tensorrt build
* Add tensorrt images for Jetson boards
* Add Jetson ffmpeg hwaccel
* Update docs
* Add CODEOWNERS
* CI
* Change default model from yolov7-tiny-416 to yolov7-320
In my experience the tiny models perform markedly worse without being
much faster
* fixup! Update docs
* Make main frigate build non rpi specific and build rpi using base image
* Add boards to sidebar
* Fix docker build
* Fix docs build
* Update pr branch for testing
* remove target from rpi build
* Remove manual build
* Add push build for rpi
* fix typos, improve wording
* Add arm build for rpi
* Cleanup and add default github ref name
* Cleanup docker build file system
* Setup to use docker bake
* Add ci/cd for bake
* Fix path
* Fix devcontainer
* Set targets
* Fix build
* Fix syntax
* Add wheels target
* Move dev container to trt
* Update key and fix rpi local
* Move requirements files and set intermediate targets
* Add back --load
* Update docs for community board development
* Update installation docs to reflect different builds available
* Update docs with official and community supported headers
* Update codeowners docs
* Update docs
* Assemble main and standard builds
* Change order of pushes
* Remove community board after successful build
* Fix rpi bake file names
