Merge branch 'release-0.11.0' of https://github.com/blakeblackshear/frigate into sub_label_filter

docs/docs/configuration/hardware_acceleration.md

@@ -5,22 +5,11 @@ title: Hardware Acceleration
 
 It is recommended to update your configuration to enable hardware accelerated decoding in ffmpeg. Depending on your system, these parameters may not be compatible. More information on hardware accelerated decoding for ffmpeg can be found here: https://trac.ffmpeg.org/wiki/HWAccelIntro
 
-### Raspberry Pi 3/4 (32-bit OS)
+### Raspberry Pi 3/4
 
 Ensure you increase the allocated RAM for your GPU to at least 128 (raspi-config > Performance Options > GPU Memory).
 **NOTICE**: If you are using the addon, you may need to turn off `Protection mode` for hardware acceleration.
 
-```yaml
-ffmpeg:
-  hwaccel_args:
-    - -c:v
-    - h264_mmal
-```
-
-### Raspberry Pi 3/4 (64-bit OS)
-
-**NOTICE**: If you are using the addon, you may need to turn off `Protection mode` for hardware acceleration.
-
 ```yaml
 ffmpeg:
   hwaccel_args:

docs/docs/configuration/index.md

@@ -246,12 +246,14 @@ motion:
   # Enables dynamic contrast improvement. This should help improve night detections at the cost of making motion detection more sensitive
   # for daytime.
   improve_contrast: False
+  # Optional: Delay when updating camera motion through MQTT from ON -> OFF (default: shown below).
+  mqtt_off_delay: 30
 
 # Optional: Record configuration
 # NOTE: Can be overridden at the camera level
 record:
   # Optional: Enable recording (default: shown below)
-  # WARNING: If recording is disabled in the config, turning it on via 
+  # WARNING: If recording is disabled in the config, turning it on via
   #          the UI or MQTT later will have no effect.
   # WARNING: Frigate does not currently support limiting recordings based
   #          on available disk space automatically. If using recordings,

docs/docs/integrations/mqtt.md

@@ -123,6 +123,12 @@ Topic with current state of snapshots for a camera. Published values are `ON` an
 Topic to turn motion detection for a camera on and off. Expected values are `ON` and `OFF`.
 NOTE: Turning off motion detection will fail if detection is not disabled.
 
+### `frigate/<camera_name>/motion`
+
+Whether camera_name is currently detecting motion. Expected values are `ON` and `OFF`.
+NOTE: After motion is initially detected, `ON` will be set until no motion has
+been detected for `mqtt_off_delay` seconds (30 by default).
+
 ### `frigate/<camera_name>/motion/state`
 
 Topic with current state of motion detection for a camera. Published values are `ON` and `OFF`.

frigate/config.py

@@ -134,6 +134,10 @@ class MotionConfig(FrigateBaseModel):
     mask: Union[str, List[str]] = Field(
         default="", title="Coordinates polygon for the motion mask."
     )
+    mqtt_off_delay: int = Field(
+        default=30,
+        title="Delay for updating MQTT with no motion detected.",
+    )
 
 
 class RuntimeMotionConfig(MotionConfig):

frigate/object_processing.py

@@ -1,29 +1,24 @@
 import base64
-import copy
 import datetime
-import hashlib
-import itertools
 import json
 import logging
 import os
 import queue
 import threading
-import time
 from collections import Counter, defaultdict
-from statistics import mean, median
+from statistics import median
 from typing import Callable
 
 import cv2
 import numpy as np
 
 from frigate.config import CameraConfig, SnapshotsConfig, RecordConfig, FrigateConfig
-from frigate.const import CACHE_DIR, CLIPS_DIR, RECORD_DIR
+from frigate.const import CLIPS_DIR
 from frigate.util import (
     SharedMemoryFrameManager,
     calculate_region,
     draw_box_with_label,
     draw_timestamp,
-    load_labels,
 )
 
 logger = logging.getLogger(__name__)
@@ -652,6 +647,7 @@ class TrackedObjectProcessor(threading.Thread):
         self.stop_event = stop_event
         self.camera_states: dict[str, CameraState] = {}
         self.frame_manager = SharedMemoryFrameManager()
+        self.last_motion_detected: dict[str, float] = {}
 
         def start(camera, obj: TrackedObject, current_frame_time):
             self.event_queue.put(("start", camera, obj.to_dict()))
@@ -844,6 +840,32 @@ class TrackedObjectProcessor(threading.Thread):
 
         return True
 
+    def update_mqtt_motion(self, camera, frame_time, motion_boxes):
+        # publish if motion is currently being detected
+        if motion_boxes:
+            # only send ON if motion isn't already active
+            if self.last_motion_detected.get(camera, 0) == 0:
+                self.client.publish(
+                    f"{self.topic_prefix}/{camera}/motion",
+                    "ON",
+                    retain=False,
+                )
+
+            # always updated latest motion
+            self.last_motion_detected[camera] = frame_time
+        elif self.last_motion_detected.get(camera, 0) > 0:
+            mqtt_delay = self.config.cameras[camera].motion.mqtt_off_delay
+
+            # If no motion, make sure the off_delay has passed
+            if frame_time - self.last_motion_detected.get(camera, 0) >= mqtt_delay:
+                self.client.publish(
+                    f"{self.topic_prefix}/{camera}/motion",
+                    "OFF",
+                    retain=False,
+                )
+                # reset the last_motion so redundant `off` commands aren't sent
+                self.last_motion_detected[camera] = 0
+
     def get_best(self, camera, label):
         # TODO: need a lock here
         camera_state = self.camera_states[camera]
@@ -879,6 +901,8 @@ class TrackedObjectProcessor(threading.Thread):
                 frame_time, current_tracked_objects, motion_boxes, regions
             )
 
+            self.update_mqtt_motion(camera, frame_time, motion_boxes)
+
             tracked_objects = [
                 o.to_dict() for o in camera_state.tracked_objects.values()
             ]

web/src/components/VideoPlayer.jsx

@@ -6,24 +6,25 @@ import 'videojs-seek-buttons';
 import 'video.js/dist/video-js.css';
 import 'videojs-seek-buttons/dist/videojs-seek-buttons.css';
 
-const defaultOptions = {
-  controls: true,
-  playbackRates: [0.5, 1, 2, 4, 8],
-  fluid: true,
-};
-const defaultSeekOptions = {
-  forward: 30,
-  back: 10,
-};
-
 export default function VideoPlayer({ children, options, seekOptions = {}, onReady = () => {}, onDispose = () => {} }) {
   const playerRef = useRef();
-  
-  if (!videojs.browser.IS_FIREFOX) {
-    defaultOptions.playbackRates.push(16);
-  }
-  
+
   useEffect(() => {
+    const defaultOptions = {
+      controls: true,
+      playbackRates: [0.5, 1, 2, 4, 8],
+      fluid: true,
+    };
+
+    const defaultSeekOptions = {
+      forward: 30,
+      back: 10,
+    };
+
+    if (!videojs.browser.IS_FIREFOX) {
+      defaultOptions.playbackRates.push(16);
+    }
+
     const player = videojs(playerRef.current, { ...defaultOptions, ...options }, () => {
       onReady(player);
     });