administrator/frigate
1
0
Fork 0
mirror of https://github.com/blakeblackshear/frigate.git synced 2026-07-30 07:39:01 +03:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/master' into dev

Browse Source
This commit is contained in:
Blake Blackshear
2024-10-05 10:48:14 -05:00
parent 9c751230a1 21c12d118b
commit 47ad0ca993
21 changed files with 184 additions and 53 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/docs/troubleshooting/edgetpu.md
+12
View File
@@ -28,6 +28,18 @@ The USB coral has different IDs when it is uninitialized and initialized.
- When running Frigate in a VM, Proxmox lxc, etc. you must ensure both device IDs are mapped.
- When running HA OS you may need to run the Full Access version of the Frigate addon with the `Protected Mode` switch disabled so that the coral can be accessed.
### Synology 716+II running DSM 7.2.1-69057 Update 5
Some users have reported that this older device runs an older kernel causing issues with the coral not being detected. The following steps allowed it to be detected correctly:
1. Plug in the coral TPU in any of the USB ports on the NAS
2. Open the control panel - info screen. The coral TPU would be shown as a generic device.
3. Start the docker container with Coral TPU enabled in the config
4. The TPU would be detected but a few moments later it would disconnect.
5. While leaving the TPU device plugged in, restart the NAS using the reboot command in the UI. Do NOT unplug the NAS/power it off etc.
6. Open the control panel - info scree. The coral TPU will now be recognised as a USB Device - google inc
7. Start the frigate container. Everything should work now!
## USB Coral Detection Appears to be Stuck
The USB Coral can become stuck and need to be restarted, this can happen for a number of reasons depending on hardware and software setup. Some common reasons are: