Merge remote-tracking branch 'origin/master' into dev

This commit is contained in:
Blake Blackshear
2025-12-31 13:15:05 +00:00
9 changed files with 153 additions and 33 deletions
+12 -2
View File
@@ -188,10 +188,10 @@ go2rtc:
# example for connectin to a Reolink camera that supports two way talk
your_reolink_camera_twt:
- "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=username&password=password#video=copy#audio=copy#audio=opus"
- "rtsp://username:password@reolink_ip/Preview_01_sub
- "rtsp://username:password@reolink_ip/Preview_01_sub"
your_reolink_camera_twt_sub:
- "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=username&password=password"
- "rtsp://username:password@reolink_ip/Preview_01_sub
- "rtsp://username:password@reolink_ip/Preview_01_sub"
# example for connecting to a Reolink NVR
your_reolink_camera_via_nvr:
- "ffmpeg:http://reolink_nvr_ip/flv?port=1935&app=bcs&stream=channel3_main.bcs&user=username&password=password" # channel numbers are 0-15
@@ -227,6 +227,12 @@ cameras:
### Unifi Protect Cameras
:::note
Unifi G5s cameras and newer need a Unifi Protect server to enable rtsps stream, it's not posible to enable it in standalone mode.
:::
Unifi protect cameras require the rtspx stream to be used with go2rtc.
To utilize a Unifi protect camera, modify the rtsps link to begin with rtspx.
Additionally, remove the "?enableSrtp" from the end of the Unifi link.
@@ -252,6 +258,10 @@ ffmpeg:
TP-Link VIGI cameras need some adjustments to the main stream settings on the camera itself to avoid issues. The stream needs to be configured as `H264` with `Smart Coding` set to `off`. Without these settings you may have problems when trying to watch recorded footage. For example Firefox will stop playback after a few seconds and show the following error message: `The media playback was aborted due to a corruption problem or because the media used features your browser did not support.`.
### Wyze Wireless Cameras
Some community members have found better performance on Wyze cameras by using an alternative firmware known as [Thingino](https://thingino.com/).
## USB Cameras (aka Webcams)
To use a USB camera (webcam) with Frigate, the recommendation is to use go2rtc's [FFmpeg Device](https://github.com/AlexxIT/go2rtc?tab=readme-ov-file#source-ffmpeg-device) support: