---
id: installation
title: Installation
---

Frigate is a Docker container that can be run on any Docker host including as a [Home Assistant Add-on](https://www.home-assistant.io/addons/). Note that the Home Assistant Add-on is **not** the same thing as the integration. The [integration](/integrations/home-assistant) is required to integrate Frigate into Home Assistant, whether you are running Frigate as a standalone Docker container or as a Home Assistant Add-on.

:::tip

If you already have Frigate installed as a Home Assistant Add-on, check out the [getting started guide](../guides/getting_started#configuring-frigate) to configure Frigate.

:::

## Dependencies

**MQTT broker (optional)** - An MQTT broker is optional with Frigate, but is required for the Home Assistant integration. If using Home Assistant, Frigate and Home Assistant must be connected to the same MQTT broker.

## Preparing your hardware

### Operating System

Frigate runs best with Docker installed on bare metal Debian-based distributions. For ideal performance, Frigate needs low overhead access to underlying hardware for the Coral and GPU devices. Running Frigate in a VM on top of Proxmox, ESXi, Virtualbox, etc. is not recommended though [some users have had success with Proxmox](#proxmox).

Windows is not officially supported, but some users have had success getting it to run under WSL or Virtualbox. Getting the GPU and/or Coral devices properly passed to Frigate may be difficult or impossible. Search previous discussions or issues for help.

### Storage

Frigate uses the following locations for read/write operations in the container. Docker volume mappings can be used to map these to any location on your host machine.

- `/config`: Used to store the Frigate config file and sqlite database. You will also see a few files alongside the database file while Frigate is running.
- `/media/frigate/clips`: Used for snapshot storage. In the future, it will likely be renamed from `clips` to `snapshots`. The file structure here cannot be modified and isn't intended to be browsed or managed manually.
- `/media/frigate/recordings`: Internal system storage for recording segments. The file structure here cannot be modified and isn't intended to be browsed or managed manually.
- `/media/frigate/exports`: Storage for clips and timelapses that have been exported via the WebUI or API.
- `/tmp/cache`: Cache location for recording segments. Initial recordings are written here before being checked and converted to mp4 and moved to the recordings folder. Segments generated via the `clip.mp4` endpoints are also concatenated and processed here. It is recommended to use a [`tmpfs`](https://docs.docker.com/storage/tmpfs/) mount for this.
- `/dev/shm`: Internal cache for raw decoded frames in shared memory. It is not recommended to modify this directory or map it with docker. The minimum size is impacted by the `shm-size` calculations below.

### Ports

The following ports are used by Frigate and can be mapped via docker as required.

| Port   | Description                                                                                                                                                                |
| ------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| `8971` | Authenticated UI and API access without TLS. Reverse proxies should use this port.                                                                                         |
| `5000` | Internal unauthenticated UI and API access. Access to this port should be limited. Intended to be used within the docker network for services that integrate with Frigate. |
| `8554` | RTSP restreaming. By default, these streams are unauthenticated. Authentication can be configured in go2rtc section of config.                                             |
| `8555` | WebRTC connections for cameras with two-way talk support.                                                                                                                  |

#### Common Docker Compose storage configurations

Writing to a local disk or external USB drive:

```yaml
services:
  frigate:
    ...
    volumes:
      - /path/to/your/config:/config
      - /path/to/your/storage:/media/frigate
      - type: tmpfs # Recommended: 1GB of memory
        target: /tmp/cache
        tmpfs:
          size: 1000000000
    ...
```

:::warning

Users of the Snapcraft build of Docker cannot use storage locations outside your $HOME folder.

:::

### Calculating required shm-size

Frigate utilizes shared memory to store frames during processing. The default `shm-size` provided by Docker is **64MB**.

The default shm size of **128MB** is fine for setups with **2 cameras** detecting at **720p**. If Frigate is exiting with "Bus error" messages, it is likely because you have too many high resolution cameras and you need to specify a higher shm size, using [`--shm-size`](https://docs.docker.com/engine/reference/run/#runtime-constraints-on-resources) (or [`service.shm_size`](https://docs.docker.com/compose/compose-file/compose-file-v2/#shm_size) in Docker Compose).

The Frigate container also stores logs in shm, which can take up to **40MB**, so make sure to take this into account in your math as well.

You can calculate the **minimum** shm size for each camera with the following formula using the resolution specified for detect:

```console
# Template for one camera without logs, replace <width> and <height>
$ python -c 'print("{:.2f}MB".format((<width> * <height> * 1.5 * 20 + 270480) / 1048576))'

# Example for 1280x720, including logs
$ python -c 'print("{:.2f}MB".format((1280 * 720 * 1.5 * 20 + 270480) / 1048576 + 40))'
66.63MB

# Example for eight cameras detecting at 1280x720, including logs
$ python -c 'print("{:.2f}MB".format(((1280 * 720 * 1.5 * 20 + 270480) / 1048576) * 8 + 40))'
253MB
```

The shm size cannot be set per container for Home Assistant add-ons. However, this is probably not required since by default Home Assistant Supervisor allocates `/dev/shm` with half the size of your total memory. If your machine has 8GB of memory, chances are that Frigate will have access to up to 4GB without any additional configuration.

## Extra Steps for Specific Hardware

The following sections contain additional setup steps that are only required if you are using specific hardware. If you are not using any of these hardware types, you can skip to the [Docker](#docker) installation section.

### Raspberry Pi 3/4

By default, the Raspberry Pi limits the amount of memory available to the GPU. In order to use ffmpeg hardware acceleration, you must increase the available memory by setting `gpu_mem` to the maximum recommended value in `config.txt` as described in the [official docs](https://www.raspberrypi.org/documentation/computers/config_txt.html#memory-options).

Additionally, the USB Coral draws a considerable amount of power. If using any other USB devices such as an SSD, you will experience instability due to the Pi not providing enough power to USB devices. You will need to purchase an external USB hub with it's own power supply. Some have reported success with <a href="https://amzn.to/3a2mH0P" target="_blank" rel="nofollow noopener sponsored">this</a> (affiliate link).

### Hailo-8

The Hailo-8 and Hailo-8L AI accelerators are available in both M.2 and HAT form factors for the Raspberry Pi. The M.2 version typically connects to a carrier board for PCIe, which then interfaces with the Raspberry Pi 5 as part of the AI Kit. The HAT version can be mounted directly onto compatible Raspberry Pi models. Both form factors have been successfully tested on x86 platforms as well, making them versatile options for various computing environments.

#### Installation

:::warning

On Raspberry Pi OS **Bookworm**, the kernel includes an older version of the Hailo driver that is incompatible with Frigate. You **must** follow the installation steps below to install the correct driver version, and you **must** disable the built-in kernel driver as described in step 1.

On Raspberry Pi OS **Trixie**, the Hailo driver is no longer shipped with the kernel. It is installed via DKMS, and the conflict described below does not apply. You can simply run the installation script.

:::

1. **Disable the built-in Hailo driver (Raspberry Pi Bookworm OS only)**:

   :::note

   If you are **not** using a Raspberry Pi with **Bookworm OS**, skip this step and proceed directly to step 2.
   
   If you are using Raspberry Pi with **Trixie OS**, also skip this step and proceed directly to step 2.

   :::

   First, check if the driver is currently loaded:

   ```bash
   lsmod | grep hailo
   ```
   
   If it shows `hailo_pci`, unload it:

   ```bash
   sudo modprobe -r hailo_pci
   ```
   
   Then locate the built-in kernel driver and rename it so it cannot be loaded.
   Renaming allows the original driver to be restored later if needed.
   First, locate the currently installed kernel module:

   ```bash
   modinfo -n hailo_pci
   ```

   Example output:
   
   ```
   /lib/modules/6.6.31+rpt-rpi-2712/kernel/drivers/media/pci/hailo/hailo_pci.ko.xz
   ```
   Save the module path to a variable:
   
   ```bash
   BUILTIN=$(modinfo -n hailo_pci)
   ```

   And rename the module by appending .bak:
    
   ```bash
   sudo mv "$BUILTIN" "${BUILTIN}.bak"
   ```
   
   Now refresh the kernel module map so the system recognizes the change:
   
   ```bash
   sudo depmod -a
   ```
   
   Reboot your Raspberry Pi:

   ```bash
   sudo reboot
   ```

   After rebooting, verify the built-in driver is not loaded:

   ```bash
   lsmod | grep hailo
   ```

   This command should return no results.

3. **Run the installation script**:

   Download the installation script:

   ```bash
   wget https://raw.githubusercontent.com/blakeblackshear/frigate/dev/docker/hailo8l/user_installation.sh
   ```

   Make it executable:

   ```bash
   sudo chmod +x user_installation.sh
   ```

   Run the script:

   ```bash
   ./user_installation.sh
   ```

   The script will:

   - Install necessary build dependencies
   - Clone and build the Hailo driver from the official repository
   - Install the driver
   - Download and install the required firmware
   - Set up udev rules

4. **Reboot your system**:

   After the script completes successfully, reboot to load the firmware:

   ```bash
   sudo reboot
   ```

5. **Verify the installation**:

   After rebooting, verify that the Hailo device is available:

   ```bash
   ls -l /dev/hailo0
   ```

   You should see the device listed. You can also verify the driver is loaded:

   ```bash
   lsmod | grep hailo_pci
   ```

   Verify the driver version:
   
   ```bash
   cat /sys/module/hailo_pci/version
   ```
   
   Verify that the firmware was installed correctly:
   
   ```bash
   ls -l /lib/firmware/hailo/hailo8_fw.bin
   ```

  **Optional: Fix PCIe descriptor page size error**

   If you encounter the following error:

   ```
   [HailoRT] [error] CHECK failed - max_desc_page_size given 16384 is bigger than hw max desc page size 4096
   ```

   Create a configuration file to force the correct descriptor page size:

   ```bash
   echo 'options hailo_pci force_desc_page_size=4096' | sudo tee /etc/modprobe.d/hailo_pci.conf
   ```

   and reboot:

   ```bash
   sudo reboot
   ```

#### Setup

To set up Frigate, follow the default installation instructions, for example: `ghcr.io/blakeblackshear/frigate:stable`

Next, grant Docker permissions to access your hardware by adding the following lines to your `docker-compose.yml` file:

```yaml
devices:
  - /dev/hailo0
```

If you are using `docker run`, add this option to your command `--device /dev/hailo0`

#### Configuration

Finally, configure [hardware object detection](/configuration/object_detectors#hailo-8l) to complete the setup.

### MemryX MX3

The MemryX MX3 Accelerator is available in the M.2 2280 form factor (like an NVMe SSD), and supports a variety of configurations:

- x86 (Intel/AMD) PCs
- Raspberry Pi 5
- Orange Pi 5 Plus/Max
- Multi-M.2 PCIe carrier cards

#### Configuration

#### Installation

To get started with MX3 hardware setup for your system, refer to the [Hardware Setup Guide](https://developer.memryx.com/get_started/hardware_setup.html).

Then follow these steps for installing the correct driver/runtime configuration:

1. Copy or download [this script](https://github.com/blakeblackshear/frigate/blob/dev/docker/memryx/user_installation.sh).
2. Ensure it has execution permissions with `sudo chmod +x user_installation.sh`
3. Run the script with `./user_installation.sh`
4. **Restart your computer** to complete driver installation.

#### Setup

To set up Frigate, follow the default installation instructions, for example: `ghcr.io/blakeblackshear/frigate:stable`

Next, grant Docker permissions to access your hardware by adding the following lines to your `docker-compose.yml` file:

```yaml
devices:
  - /dev/memx0
```

During configuration, you must run Docker in privileged mode and ensure the container can access the max-manager.

In your `docker-compose.yml`, also add:

```yaml
privileged: true

volumes:
  - /run/mxa_manager:/run/mxa_manager
```

If you can't use Docker Compose, you can run the container with something similar to this:

```bash
  docker run -d \
    --name frigate-memx \
    --restart=unless-stopped \
    --mount type=tmpfs,target=/tmp/cache,tmpfs-size=1000000000 \
    --shm-size=256m \
    -v /path/to/your/storage:/media/frigate \
    -v /path/to/your/config:/config \
    -v /etc/localtime:/etc/localtime:ro \
    -v /run/mxa_manager:/run/mxa_manager \
    -e FRIGATE_RTSP_PASSWORD='password' \
    --privileged=true \
    -p 8971:8971 \
    -p 8554:8554 \
    -p 5000:5000 \
    -p 8555:8555/tcp \
    -p 8555:8555/udp \
    --device /dev/memx0 \
    ghcr.io/blakeblackshear/frigate:stable
```

#### Configuration

Finally, configure [hardware object detection](/configuration/object_detectors#memryx-mx3) to complete the setup.

### Rockchip platform

Make sure that you use a linux distribution that comes with the rockchip BSP kernel 5.10 or 6.1 and necessary drivers (especially rkvdec2 and rknpu). To check, enter the following commands:

```
$ uname -r
5.10.xxx-rockchip # or 6.1.xxx; the -rockchip suffix is important
$ ls /dev/dri
by-path  card0  card1  renderD128  renderD129 # should list renderD128 (VPU) and renderD129 (NPU)
$ sudo cat /sys/kernel/debug/rknpu/version
RKNPU driver: v0.9.2 # or later version
```

I recommend [Armbian](https://www.armbian.com/download/?arch=aarch64), if your board is supported.

#### Setup

Follow Frigate's default installation instructions, but use a docker image with `-rk` suffix for example `ghcr.io/blakeblackshear/frigate:stable-rk`.

Next, you need to grant docker permissions to access your hardware:

- During the configuration process, you should run docker in privileged mode to avoid any errors due to insufficient permissions. To do so, add `privileged: true` to your `docker-compose.yml` file or the `--privileged` flag to your docker run command.
- After everything works, you should only grant necessary permissions to increase security. Disable the privileged mode and add the lines below to your `docker-compose.yml` file:

```yaml
security_opt:
  - apparmor=unconfined
  - systempaths=unconfined
devices:
  - /dev/dri
  - /dev/dma_heap
  - /dev/rga
  - /dev/mpp_service
volumes:
  - /sys/:/sys/:ro
```

or add these options to your `docker run` command:

```
--security-opt systempaths=unconfined \
--security-opt apparmor=unconfined \
--device /dev/dri \
--device /dev/dma_heap \
--device /dev/rga \
--device /dev/mpp_service \
--volume /sys/:/sys/:ro
```

#### Configuration

Next, you should configure [hardware object detection](/configuration/object_detectors#rockchip-platform) and [hardware video processing](/configuration/hardware_acceleration_video#rockchip-platform).

### Synaptics

- SL1680

#### Setup

Follow Frigate's default installation instructions, but use a docker image with `-synaptics` suffix for example `ghcr.io/blakeblackshear/frigate:stable-synaptics`.

Next, you need to grant docker permissions to access your hardware:

- During the configuration process, you should run docker in privileged mode to avoid any errors due to insufficient permissions. To do so, add `privileged: true` to your `docker-compose.yml` file or the `--privileged` flag to your docker run command.

```yaml
devices:
  - /dev/synap
  - /dev/video0
  - /dev/video1
```

or add these options to your `docker run` command:

```
--device /dev/synap \
--device /dev/video0 \
--device /dev/video1
```

#### Configuration

Next, you should configure [hardware object detection](/configuration/object_detectors#synaptics) and [hardware video processing](/configuration/hardware_acceleration_video#synaptics).

### AXERA

<details>
<summary>AXERA accelerators</summary>
AXERA accelerators are available in an M.2 form factor, compatible with both Raspberry Pi and Orange Pi. This form factor has also been successfully tested on x86 platforms, making it a versatile choice for various computing environments.

#### Installation

Using AXERA accelerators requires the installation of the AXCL driver. We provide a convenient Linux script to complete this installation.

Follow these steps for installation:

1. Copy or download [this script](https://github.com/ivanshi1108/assets/releases/download/v0.16.2/user_installation.sh).
2. Ensure it has execution permissions with `sudo chmod +x user_installation.sh`
3. Run the script with `./user_installation.sh`

#### Setup

To set up Frigate, follow the default installation instructions, for example: `ghcr.io/blakeblackshear/frigate:stable`

Next, grant Docker permissions to access your hardware by adding the following lines to your `docker-compose.yml` file:

```yaml
devices:
  - /dev/axcl_host
  - /dev/ax_mmb_dev
  - /dev/msg_userdev
```

If you are using `docker run`, add this option to your command `--device /dev/axcl_host --device /dev/ax_mmb_dev --device /dev/msg_userdev`

#### Configuration

Finally, configure [hardware object detection](/configuration/object_detectors#axera) to complete the setup.
</details>

## Docker

Running through Docker with Docker Compose is the recommended install method.

```yaml
services:
  frigate:
    container_name: frigate
    privileged: true # this may not be necessary for all setups
    restart: unless-stopped
    stop_grace_period: 30s # allow enough time to shut down the various services
    image: ghcr.io/blakeblackshear/frigate:stable
    shm_size: "512mb" # update for your cameras based on calculation above
    devices:
      - /dev/bus/usb:/dev/bus/usb # Passes the USB Coral, needs to be modified for other versions
      - /dev/apex_0:/dev/apex_0 # Passes a PCIe Coral, follow driver instructions here https://github.com/jnicolson/gasket-builder
      - /dev/video11:/dev/video11 # For Raspberry Pi 4B
      - /dev/dri/renderD128:/dev/dri/renderD128 # AMD / Intel GPU, needs to be updated for your hardware
      - /dev/accel:/dev/accel # Intel NPU
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /path/to/your/config:/config
      - /path/to/your/storage:/media/frigate
      - type: tmpfs # Recommended: 1GB of memory
        target: /tmp/cache
        tmpfs:
          size: 1000000000
    ports:
      - "8971:8971"
      # - "5000:5000" # Internal unauthenticated access. Expose carefully.
      - "8554:8554" # RTSP feeds
      - "8555:8555/tcp" # WebRTC over tcp
      - "8555:8555/udp" # WebRTC over udp
    environment:
      FRIGATE_RTSP_PASSWORD: "password"
```

If you can't use Docker Compose, you can run the container with something similar to this:

```bash
docker run -d \
  --name frigate \
  --restart=unless-stopped \
  --stop-timeout 30 \
  --mount type=tmpfs,target=/tmp/cache,tmpfs-size=1000000000 \
  --device /dev/bus/usb:/dev/bus/usb \
  --device /dev/dri/renderD128 \
  --shm-size=64m \
  -v /path/to/your/storage:/media/frigate \
  -v /path/to/your/config:/config \
  -v /etc/localtime:/etc/localtime:ro \
  -e FRIGATE_RTSP_PASSWORD='password' \
  -p 8971:8971 \
  -p 8554:8554 \
  -p 8555:8555/tcp \
  -p 8555:8555/udp \
  ghcr.io/blakeblackshear/frigate:stable
```

The official docker image tags for the current stable version are:

- `stable` - Standard Frigate build for amd64 & RPi Optimized Frigate build for arm64. This build includes support for Hailo devices as well.
- `stable-standard-arm64` - Standard Frigate build for arm64
- `stable-tensorrt` - Frigate build specific for amd64 devices running an nvidia GPU
- `stable-rocm` - Frigate build for [AMD GPUs](../configuration/object_detectors.md#amdrocm-gpu-detector)

The community supported docker image tags for the current stable version are:

- `stable-tensorrt-jp6` - Frigate build optimized for nvidia Jetson devices running Jetpack 6
- `stable-rk` - Frigate build for SBCs with Rockchip SoC

## Home Assistant Add-on

:::warning

As of Home Assistant Operating System 10.2 and Home Assistant 2023.6 defining separate network storage for media is supported.

There are important limitations in HA OS to be aware of:

- Separate local storage for media is not yet supported by Home Assistant
- AMD GPUs are not supported because HA OS does not include the mesa driver.
- Intel NPUs are not supported because HA OS does not include the NPU firmware.
- Nvidia GPUs are not supported because addons do not support the nvidia runtime.

:::

:::tip

See [the network storage guide](/guides/ha_network_storage.md) for instructions to setup network storage for frigate.

:::

Home Assistant OS users can install via the Add-on repository.

1. In Home Assistant, navigate to _Settings_ > _Add-ons_ > _Add-on Store_ > _Repositories_
2. Add `https://github.com/blakeblackshear/frigate-hass-addons`
3. Install the desired variant of the Frigate Add-on (see below)
4. Setup your network configuration in the `Configuration` tab
5. Start the Add-on
6. Use the _Open Web UI_ button to access the Frigate UI, then click in the _cog icon_ > _Configuration editor_ and configure Frigate to your liking

There are several variants of the Add-on available:

| Add-on Variant             | Description                                                |
| -------------------------- | ---------------------------------------------------------- |
| Frigate                    | Current release with protection mode on                    |
| Frigate (Full Access)      | Current release with the option to disable protection mode |
| Frigate Beta               | Beta release with protection mode on                       |
| Frigate Beta (Full Access) | Beta release with the option to disable protection mode    |

If you are using hardware acceleration for ffmpeg, you **may** need to use the _Full Access_ variant of the Add-on. This is because the Frigate Add-on runs in a container with limited access to the host system. The _Full Access_ variant allows you to disable _Protection mode_ and give Frigate full access to the host system.

You can also edit the Frigate configuration file through the [VS Code Add-on](https://github.com/hassio-addons/addon-vscode) or similar. In that case, the configuration file will be at `/addon_configs/<addon_directory>/config.yml`, where `<addon_directory>` is specific to the variant of the Frigate Add-on you are running. See the list of directories [here](../configuration/index.md#accessing-add-on-config-dir).

## Kubernetes

Use the [helm chart](https://github.com/blakeblackshear/blakeshome-charts/tree/master/charts/frigate).

## Unraid

Many people have powerful enough NAS devices or home servers to also run docker. There is a Unraid Community App.
To install make sure you have the [community app plugin here](https://forums.unraid.net/topic/38582-plug-in-community-applications/). Then search for "Frigate" in the apps section within Unraid - you can see the online store [here](https://unraid.net/community/apps?q=frigate#r)

## Proxmox

[According to Proxmox documentation](https://pve.proxmox.com/pve-docs/pve-admin-guide.html#chapter_pct) it is recommended that you run application containers like Frigate inside a Proxmox QEMU VM. This will give you all the advantages of application containerization, while also providing the benefits that VMs offer, such as strong isolation from the host and the ability to live-migrate, which otherwise isn’t possible with containers. Ensure that ballooning is **disabled**, especially if you are passing through a GPU to the VM.

:::warning

If you choose to run Frigate via LXC in Proxmox the setup can be complex so be prepared to read the Proxmox and LXC documentation, Frigate does not officially support running inside of an LXC.

:::

Suggestions include:

- For Intel-based hardware acceleration, to allow access to the `/dev/dri/renderD128` device with major number 226 and minor number 128, add the following lines to the `/etc/pve/lxc/<id>.conf` LXC configuration:
  - `lxc.cgroup2.devices.allow: c 226:128 rwm`
  - `lxc.mount.entry: /dev/dri/renderD128 dev/dri/renderD128 none bind,optional,create=file`
- The LXC configuration will likely also need `features: fuse=1,nesting=1`. This allows running a Docker container in an LXC container (`nesting`) and prevents duplicated files and wasted storage (`fuse`).
- Successfully passing hardware devices through multiple levels of containerization (LXC then Docker) can be difficult. Many people make devices like `/dev/dri/renderD128` world-readable in the host or run Frigate in a privileged LXC container.
- The virtualization layer often introduces a sizable amount of overhead for communication with Coral devices, but [not in all circumstances](https://github.com/blakeblackshear/frigate/discussions/1837).

See the [Proxmox LXC discussion](https://github.com/blakeblackshear/frigate/discussions/5773) for more general information.

## ESXi

For details on running Frigate using ESXi, please see the instructions [here](https://williamlam.com/2023/05/frigate-nvr-with-coral-tpu-igpu-passthrough-using-esxi-on-intel-nuc.html).

If you're running Frigate on a rack mounted server and want to passthrough the Google Coral, [read this.](https://github.com/blakeblackshear/frigate/issues/305)

## Synology NAS on DSM 7

These settings were tested on DSM 7.1.1-42962 Update 4

**General:**

The `Execute container using high privilege` option needs to be enabled in order to give the frigate container the elevated privileges it may need.

The `Enable auto-restart` option can be enabled if you want the container to automatically restart whenever it improperly shuts down due to an error.

![image](https://user-images.githubusercontent.com/4516296/232586790-0b659a82-561d-4bc5-899b-0f5b39c6b11d.png)

**Advanced Settings:**

If you want to use the password template feature, you should add the "FRIGATE_RTSP_PASSWORD" environment variable and set it to your preferred password under advanced settings. The rest of the environment variables should be left as default for now.

![image](https://user-images.githubusercontent.com/4516296/232587163-0eb662d4-5e28-4914-852f-9db1ec4b9c3d.png)

**Port Settings:**

The network mode should be set to `bridge`. You need to map the default frigate container ports to your local Synology NAS ports that you want to use to access Frigate.

There may be other services running on your NAS that are using the same ports that frigate uses. In that instance you can set the ports to auto or a specific port.

![image](https://user-images.githubusercontent.com/4516296/232582642-773c0e37-7ef5-4373-8ce3-41401b1626e6.png)

**Volume Settings:**

You need to configure 2 paths:

- The location of your config directory which will be different depending on your NAS folder structure e.g. `/docker/frigate/config` will mount to `/config` within the container.
- The location on your NAS where the recordings will be saved this needs to be a folder e.g. `/docker/volumes/frigate-0-media`

![image](https://user-images.githubusercontent.com/4516296/232585872-44431d15-55e0-4004-b78b-1e512702b911.png)

## QNAP NAS

These instructions were tested on a QNAP with an Intel J3455 CPU and 16G RAM, running QTS 4.5.4.2117.

QNAP has a graphic tool named Container Station to install and manage docker containers. However, there are two limitations with Container Station that make it unsuitable to install Frigate:

1. Container Station does not incorporate GitHub Container Registry (ghcr), which hosts Frigate docker image version 0.12.0 and above.
2. Container Station uses default 64 Mb shared memory size (shm-size), and does not have a mechanism to adjust it. Frigate requires a larger shm-size to be able to work properly with more than two high resolution cameras.

Because of above limitations, the installation has to be done from command line. Here are the steps:

**Preparation**

1. Install Container Station from QNAP App Center if it is not installed.
2. Enable ssh on your QNAP (please do an Internet search on how to do this).
3. Prepare Frigate config file, name it `config.yml`.
4. Calculate shared memory size according to [documentation](https://docs.frigate.video/frigate/installation).
5. Find your time zone value from https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
6. ssh to QNAP.

**Installation**

Run the following commands to install Frigate (using `stable` version as example):

```shell
# Download Frigate image
docker pull ghcr.io/blakeblackshear/frigate:stable
# Create directory to host Frigate config file on QNAP file system.
# E.g., you can choose to create it under /share/Container.
mkdir -p /share/Container/frigate/config
# Copy the config file prepared in step 2 into the newly created config directory.
cp path/to/your/config/file /share/Container/frigate/config
# Create directory to host Frigate media files on QNAP file system.
# (if you have a surveillance disk, create media directory on the surveillance disk.
# Example command assumes share_vol2 is the surveillance drive
mkdir -p /share/share_vol2/frigate/media
# Create Frigate docker container.  Replace shm-size value with the value from preparation step 3.
# Also replace the time zone value for 'TZ' in the sample command.
# Example command will create a docker container that uses at most 2 CPUs and 4G RAM.
# You may need to add "--env=LIBVA_DRIVER_NAME=i965 \" to the following docker run command if you
# have certain CPU (e.g., J4125). See https://docs.frigate.video/configuration/hardware_acceleration_video.
docker run \
  --name=frigate \
  --shm-size=256m \
  --restart=unless-stopped \
  --env=TZ=America/New_York \
  --volume=/share/Container/frigate/config:/config:rw \
  --volume=/share/share_vol2/frigate/media:/media/frigate:rw \
  --network=bridge \
  --privileged \
  --workdir=/opt/frigate \
  -p 8971:8971 \
  -p 8554:8554 \
  -p 8555:8555 \
  -p 8555:8555/udp \
  --label='com.qnap.qcs.network.mode=nat' \
  --label='com.qnap.qcs.gpu=False' \
  --memory="4g" \
  --cpus="2" \
  --detach=true \
  -t \
  ghcr.io/blakeblackshear/frigate:stable
```

Log into QNAP, open Container Station. Frigate docker container should be listed under 'Overview' and running. Visit Frigate Web UI by clicking Frigate docker, and then clicking the URL shown at the top of the detail page.
